VTech DM221, DM221-2 User Manual
®
Safe & SoundTM audio monitor
Online user’s manual
w w w. b a by m o n i t o r s .v t e c h . c o m
Models:
DM221/DM221-2
Congratulations
on purchasing your new VTech product. Before using this product, please
read Important safety instructions on page iii of this manual.
This manual has all the feature operations and troubleshooting necessary
to install and operate your new VTech product. Please review this manual
thoroughly to ensure proper installation and operation of this innovative and
feature rich VTech product. For support, shopping, and everything new at
VTech, visit our website at www.babymonitors.vtech.com. In Canada, please
visit www.vtechcanada.com.
Product introduction
DM221 is an audio monitor which consists of one baby unit (DM221 BU) and
one parent unit (DM221 PU).
DM221-2 is an audio monitor which consists of one baby unit (DM221-2 BU)
and two parent units (DM221-2 PU).
The parent units may be shipped with protective stickers covering the displays.
Remove the protective stickers before use.
ii
Important safety instructions
When using your equipment, basic safety precautions should always be followed to
reduce the risk of re, electric shock and injury, including the following:
Follow all warnings and instructions marked on the product.
1.
Adult setup is required.
2.
This product is intended as an aid. It is not a substitute for responsible and proper
3.
adult supervision and should not be used as such.
This product is not intended for use as a medical monitor.
4.
Do not use this product near water. For example, do not use it next to a bath tub,
5.
wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement
or shower.
CAUTION: There may be a risk of explosion if a wrong type of battery is used for the
6.
parent unit. Use only the supplied rechargeable battery pack or replacement battery
pack. Do not dispose of batteries in a re. They may explode. Dispose of used
battery according to the information in The RBRC® seal (see page 24).
Use only the adapters included with this product. Incorrect adapter polarity or
7.
voltage can seriously damage the product.
Baby unit power adapter: Input 100-120V AC 60 Hz; output: 6V DC 400 mA
Parent unit power adapter: Input 100-120V AC 60 Hz; output: 6V DC 400 mA
The power adapters are intended to be correctly oriented in a vertical or oor mount
8.
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
9.
cleaners. Use a damp cloth for cleaning.
Unplug the power cords before replacing the battery pack.
10.
Do not cut off the adapters to replace them with other plugs, as this causes a
11.
hazardous situation.
Do not allow anything to rest on the power cords. Do not install this product where
12.
the cords may be walked on or crimped.
This product should be operated only from the type of power source indicated on the
13.
marking label. If you are not sure of the type of power supply in your home, consult
your dealer or local power company.
Do not overload wall outlets or use an extension cord.
14.
Do not place this product on an unstable table, shelf, stand or other
15.
unstable surfaces.
Slots and openings in the back or bottom of this product are provided for ventilation.
16.
To protect them from overheating, these openings must not be blocked by placing
the product on a soft surface such as a bed, sofa or rug. This product should never
be placed near or over a radiator or heat register. This product should not be placed
in any area where proper ventilation is not provided.
Never push objects of any kind into this product through the slots because they may
17.
touch dangerous voltage points or create a short circuit. Never spill liquid of any kind
on the product.
iii
Important safety instructions (continued)
To reduce the risk of electric shock, do not disassemble this product, but take it to
18.
an authorized service facility. Opening or removing parts of the product other than
specied access doors may expose you to dangerous voltages or other
risks. Incorrect reassembling can cause electric shock when the product is
subsequently used.
You should test the sound reception every time you turn on the units or move one of
19.
the components.
Periodically examine all components for damage.
20.
Be aware of possible loss of privacy while using public airwaves. Conversations may
21.
be picked up by other nursery monitors, cordless phones, scanners, etc.
Children should be supervised to ensure that they do not play with the product.
22.
The product is not intended for use by persons (including children) with reduced
23.
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
iv
Cautions
Use and store the product at a temperature between 32oF and 104oF.
1.
Do not expose the product to extreme cold, heat or direct sunlight. Do not put the
2.
product close to a heating source.
The battery pack should not be exposed to excessive heat such as bright sunshine
3.
or re.
Make sure the baby unit and the adapter cord are always out of reach of the baby,
4.
at least 3 feet away from the baby or crib, to avoid a possible strangulation hazard.
Never place the baby unit inside the baby’s crib or playpen.
5.
Never cover the baby unit or parent unit(s) with anything such as a towel or
6.
a blanket.
Other electronic products such as HAM radios and DECT cordless phones may
7.
cause interference with your audio monitor. Try installing your audio monitor as far
away as possible from these types of electronic devices.
Electromagnetic elds (EMF)
This VTech product complies with all standards regarding electromagnetic elds (EMF).
If handled properly and according to the instructions in this user’s manual, the product is
safe to be used based on scientic evidence available today.
v
Table of contents
Getting started ..............................1
Parts checklist .................................1
Baby unit installation .......................2
Parent unit battery installation .........3
Parent unit installation .....................5
Parent unit battery charging ............6
Baby unit overview ..........................7
Parent unit overview ........................8
Parent unit display screen icons .....9
Positioning and operating range ...10
Positioning the audio monitor ..10
Audio settings .......................... 10
Operating range .......................10
Test your audio monitor before
use .............................................11
Parent unit settings ....................12
Using the menu .............................12
Sensitivity ......................................12
Sound alert ....................................13
Vibration alert ................................13
Nightlight auto-on ..........................14
Language.......................................14
Set default .....................................15
Baby unit operation ....................16
Power on or off the baby unit.........16
Speaker volume.............................16
Nightlight on the baby unit .............16
Find/page the parent unit...............16
Precautions for users of implanted
cardiac pacemakers ...................24
The RBRC® seal ............................24
Limited warranty ............................25
FCC and IC regulations .................27
FCC Part 15 .............................27
Industry Canada ......................27
RF radiation exposure
statement ...............................28
Technical specications ................29
Index .............................................30
Parent unit operation ..................17
Power on or off the parent unit ......17
Speaker volume ............................17
Talk to the baby unit ......................17
Appendix ......................................18
Parent unit display screen
messages ...................................18
Parent unit battery .........................19
Troubleshooting .............................20
Operating range.............................23
Maintenance ..................................23
vi
Getting started
Parts checklist
Check to make sure the package contains the following items.
Save your sales receipt and original packaging in the event warranty service
is necessary.
Baby unit
(DM221 BU/ DM2 21-2 BU)
Parent unit battery
compartment cover *
(1 for DM 221 and
2 for DM221-2 )
User’s manual
User’s manual *
Par ent uni t
(DM221 PU/DM221-2 PU)
(1 for DM 221 and 2 f or DM221-2)
Battery pack for
parent unit *
(1 for DM 221 and
2 for DM221-2 )
Important
information
Important i nformation *
Power adapters *
(2 for DM 221 and
3 for DM221-2 )
* indicates replacements are available. For more information, visit our website at
www.babymonitors.vtech.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
1
Getting started
Baby unit installation
You can power up the baby unit by connecting it to AC power.
Install the baby unit as shown below.
Make sure that the power outlet is not controlled by a wall switch. Bundle the
power adapter cord neatly with a twist tie.
The baby unit turns on when it is powered up.
Power outlet not
controlled by a
wall switch
Power adapter
The POWER
light remains
on when the
baby unit is
turned on.
Baby unit
Use only the power adapters supplied with this product. To order a
•
replacement, visit our website at www.babymonitors.vtech.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The adapters are intended to be correctly oriented in a vertical or oor mount
•
position. The prongs are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
Make sure the unit and the power adapter cord are out of reach of children.
•
2
Getting started
Parent unit battery installation
You can power up the parent unit by connecting it to AC power or to the
rechargeable battery pack provided. Even if the parent unit is connected to
AC power, we recommend you also install the battery pack. This guarantees
continued operation in case of a power outage.
Install the battery as shown below.
Insert the battery into the battery compartment with the label
1.
THIS SIDE UP facing up and the wires hanging out.
Plug the battery connector securely into the socket inside the battery
2.
compartment. The parent unit turns on when it is powered up. Place the
wires neatly inside the battery compartment.
3
Getting started
Parent unit battery installation (continued)
Align the cover at against the battery compartment, then slide it towards
3.
the center of the parent unit until it clicks into place.
If the parent unit will not be used for a long time, disconnect and remove the
•
battery pack to prevent possible leakage.
Use only the battery pack supplied with this product. To purchase a
•
replacement battery pack, visit our website at www.babymonitors.vtech.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
4
Getting started
Parent unit installation
Install the parent unit as shown below.
Make sure that the power outlet is not controlled by a wall switch. Bundle the
power adapter cord neatly with a twist tie.
When the battery pack is installed, the light turns on while charging.
Power outlet not
controlled by a
The light remains
on whe n the battery
is charging.
wall switch
Power adapter
Par ent unit
Use only the power adapters supplied with this product. To order a
•
replacement, visit our website at www.babymonitors.vtech.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or oor
•
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Make sure the units and the power adapter cords are out of reach of children.
•
5
Loading...