VTech Alphapillar Owner's Manual

Dear Parent:

At VTech® we know that a child has the ability to do great things.

That’s why all of our electronic learning products are uniquely

designed to develop a child’s mind and allow them to learn to the best

of their ability. Whether it’s introducing numbers and letters,

identifying colors and shapes, or stimulating senses with lights and

music, all VTech® infant and toddler learning products encourage

your child’s natural growth and discovery skills. When it comes to

providing electronic learning products that enlighten, entertain and

develop minds, at VTech® we see the potential in every child.

1

INTRODUCTION

Thank you for purchasing VTech® Alphapillar™ learning toy! This product
is one of a family of high quality electronic learning toys. We at VTech
are committed to providing the best possible products to entertain and
educate your child. Should you have any questions or concerns, please
call our Consumer Services Department at 1-800-521-2010 in the U.S.
or 1-800-267-7377 in Canada.

The VTech® Alphapillar™ is specifically designed for infants from birth
and up. Baby can interact with this friendly caterpillar and learn about the
alphabet and animals through activating the sensors on the caterpillars
body segments. As these sensors are activated, baby will hear friendly
phrases, lights, sound effects and music. The VT ech® Alphapillar™ will
act as a companion throughout baby’s early years of development.

PROXIMITY SENSOR

4 LIGHT-UP

VOLUME SWITCH

MODE SELECTOR SWITCH

ANIMAL BUTTONS

2

VIBRATING TAIL

BATTERY DOOR

®

INCLUDED IN THIS PACKAGE

- One VTech® Alphapillar™ learning toy

- One instruction manual

WARNING: All packing materials, such as tape, plastic sheets, wire

For information on this product warranty, please call VTech at 1-800-521­2010 in the U.S. or 1-800-267-7377 in Canada.

ties and tags are not part of this toy, and should be
discarded for your child’s safety.

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. Open the velcro opening located on the
back of the unit. Locate the battery cover
on the back of the unit. Use a screwdriver
to loosen the screw.

3. Install 3 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery box.
(The use of new alkaline batteries is
recommended for maximum performance.)

4. Replace the battery cover and tighten the
screw to secure the battery cover.

3