Vox Vc12 User Manual

VC-12

Eas

¾ Full sized metal chassis with heavy-duty pedals

¾ Rugged and easy-to-use switches and pedals

¾ Dedicated volume pedal and expression pedal

¾ RECALL switch for instantly reverting to the previous program

¾ Independent BANK UP/DOWN and FX ON/OFF switches

¾ Back up four sets of Valvetronix series sounds (32 programs x 4 banks) for a

total of 128 programs -32 at a time with VT amp

¾ 48 Preset / 96 total accessible programs when using ToneLab

¾ VOX BUS MAIN and SUB connectors for simultaneously controlling two

Valvetronix amps

¾ Easily visible, independent tuner display with muted tuning

¾ Classic VOX quality and style with traditional chrome pedal tops

Star

VVooxx VVCC--1122 MMaaiinn FFeeaattuurreess

Foot Controller

EasyStart CONTENTS

VC-12 Overview, Connections and Applications:

Preset programs, Storing programs 1-4

Loading Program Data into your Valvetronix Amp 4

VC-12 Preset Program List 4

VOX VC-12 EasyStart

VVCC--1122 OOvveerrvviieeww

The VC-12 Foot Controller is a pedal board for controlling VOX BUS- compatible equipment, including VOX Valvetronix amps and VOX Valvetronix ToneLab Direct Recording/Performance Processor. You can use your VC-12 to do the following:

• Select programs

• Control the VOX-Wah effect

• Control the speed of the U-VIBE effect

• Control the speed of Modulation effects

• Set the delay time by using the TAP switch

• Turn the Pedal, Modulation, Delay, and Reverb effects on and off individually

• Instantly recall a previously-selected program

• Tune your guitar

• Select from 96 programs from Tonelab

• Store your Valvetronix amps program data (32 Programs x 4 Sets =128 programs)

• Select programs on two Valvetronix amps at one time

• Sounds saved on the VC-12 can be transferred to another Valvetronix amp

CCoonnnneeccttiioonnss

The VC-12 can be connected to VOX-BUS compatible equipment, including: AD60VT, AD120VT, AD60VTH, AD120VTH, AD60VTX, AD120VTX, ToneLab

1. Turn off all equipment before making any connections.

2. Connect the included 10 Base-T straight cable to the VOX BUS MAIN connector on the rear panel of your VC-

12.

3. Connect the other end of the cable to the FOOT CONTROLLER connector or VOX BUS connector on your Valvetronix amp or VOX BUS-compatible device.

RREECCAALLLL sswwiittcchh

In Channel Select Mode, this switch recalls the previously selected program. You can use this to quickly switch between programs in different banks.

TTaapp sswwiittcchh && LLEEDD

This switch is used to set the delay time. The VC-12 measures the time between the last two taps to calculate the delay time. LED blinks to set the time.

CCHHAANNNNEELL--FFXX OONN//OOFFFF sswwiittcchh && LLEEDD

This switch is used to toggle between Channel Select Mode and Effect On/Off mode. In Channel Select Mode, switches 1-4 are used to select programs. LEDs 1-4 indicate the currently selected programs.

In Effect On/Off mode, these switches are used to turn the Pedal, Modulation, Delay, and Reverb effects on and off individually. LEDs 1-4 indicate whether an effects section is on or off.

VVCC--1122 PPrreesseett PPrrooggrraammss

The VC-12 is capable of storing four banks of Valvetronix amp user programs. Valvetronix amps alone can store 32 programs, whereas the VC-12 offers the user an additional 96 programs for a total of 128 programs (32 x 4 = 128). Programs can be stored from any Valvetronix amp into the VC-12, and loaded

to another amp. As an added bonus, the VC-12 can control two Valvetronix amplifiers at one time. in

The areas assigned to Switches #1, #2, #3 contain 32 factory-preset programs in each memory bank. Switch #4 is empty. It’s a really good idea to first load your 32 Valvetronix amp programs to Switch #4 so they will be safely stored in the VC-12’s memory.

+ 4 hidden pages