Vizio VX42L HDTV10A, VW42L HDTV10A Service Manual
Service Manual
V, Inc
320A Kalmus Drive Costa Mesa, CA 92626
TEL : +714-668-0588 FAX :+714-668-9099
Top Confidential
Model #: VIZIO VX42L HDTV10A /
VW42L HDTV10A
VIZIO VX42L/VW42L HDTV10A Service Manual
Table of Contents
CONTENTS PAGE
Sections
1. Features 1-1
2. Specifications 2-1
3. On Screen Display 3-1
4. Factory Preset Timings
4-1
5. Pin Assignment
5-1
6. Main Board I/O Connections 6-1
7. Theory of Circuit Operation 7-1
8. Waveforms 8-1
9. Trouble Shooting 9-1
10. Block Diagram 10-1
11. Spare parts list 11-1
12. Complete Parts List 12-1
Appendix
1. Main Board Circuit Diagram
2. Main Board PCB Layout
3. Assembly Explosion Drawing
Block Diagram
VINC Service Manual
VIZIO VX42L/VW42L HDTV10A
VIZIO VX42L/VW42L HDTV10A Service Manual
COPYRIGHT © 2000 V, INC. ALL RIGHTS RESERVED.
IBM and IBM products are registered trademarks of International Business Machines
Corporation.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
VINC and VINC products are registered trademarks of V, Inc.
VESA, EDID, DPMS and DDC are registered trademarks of Video Electronics Standards
Association (VESA).
Energy Star is a registered trademark of the US Environmental Protection Agency (EPA).
No part of this document may be copied, reproduced or transmitted by any means for any
purpose without prior written permission from VINC.
FCC INFORMATION
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that the interference will not occur in a particular installation. If this equipment
does cause unacceptable interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures -- reorient or relocate the receiving
antenna; increase the separation between equipment and receiver; or connect the into an
outlet on a circuit different from that to which the receiver is connected.
FCC WARNING
To assure continued FCC compliance, the user must use a grounded power supply cord and
the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to Amtrak products will void the user’s authority to operate this
device. Thus VINC Will not be held responsible for the product and its safety.
CE CERTIFICATION
This device complies with the requirements of the EEC directive 89/336/EEC with regard to
“Electromagnetic compatibility.”
SAFETY CAUTION
Use a power cable that is properly grounded. Always use the AC cords as follows – USA (UL);
Canada (CSA); Germany (VDE); Switzerland (SEV); Britain (BASEC/BS); Japan (Electric
Appliance Control Act); or an AC cord that meets the local safety standards.
CONFIDENTIAL – DO NOT COPY
Page 1-1
File No. SG-0211
Chapter 1 Features
1. Built in TV channel selector for TV viewing
2. Simulatnueous display of PC and TV images
3. Connectable to PC’s analog RGB port
4. Built in S-video, HDTV, composite video, HDMI and TV out
5. Built in auto adjust function for automatic adjument of screen display
6. Smoothing function enables display of smooth texts and graphics even if image
withresolution lower than 1366x768 is magnified
7. Picture In Picture (PIP) funtion to show TV or VCR images
8. Power saving to reduce consumption power too less than 3W
9. On Screen Display: user can define display mode (i.e. color, brightness,
contrast, sharpness, backlight), sound setting, PIP, TV channel program,
aspect and gamma or reset all setting.
CONFIDENTIAL – DO NOT COPY
Page 2-1
File No. SG-0211
Chapter 2 Specification
1. LCD CHARACTERISTICS
Type: 42.0 WXGA TFT LCD
Size: 42.02inch
Display Size: 42.02 inches (1067.308mm) diagonal
Outline Dimension: 983 mm (H) x 576 mm (V) x 51 mm (D) (Typ.)
Pixel Pitch: 0.227mm x 0.681mm x RGB
Pixel Format: 1366 horiz. By 768 vert. Pixels RGB strip arrangement
Contrast ratio: 1.CR : 800(Min.) 1000(Typ)
Luminance, White: 500 cd/m
2 (Typ)
Display Operating Mode: normally Black
Surface Treatment: Hard Coating (3H) ,Anti-glare treatment of the front polarizer.
2. OPTICAL CHARACTERISTICS
Viewing Angle (CR>10)
Left: 89°typ.
Right: 89°typ.
Top: 89°typ.
Bottom: 89°typ.
3. SIGNAL (Refer to the Timing Chart)
Sync Signal
(1) Type: TMDS
(2) Input Voltage Level: 90~240 Vac, 50/ 60 Hz
4.Input Connectors
RJ11, D-SUB15PIN (MINI, 3rows), Headphone, HDMIX2, RCAX3 (component),
RCAX2 (AUDIO in), RCAX3 (composite), RCAX2 (AUDIO in), S-Video, Tuner
5. POWER SUPPLY
Power Consumption: 280W MAX
Power OFF: to less than 3W MAX
CONFIDENTIAL – DO NOT COPY
Page 2-2
File No. SG-0211
6.Speaker
Output 10W (max) X2
7. ENVIRONMENT
7-1. Operating Temperature: 5c~35c (Ambient)
7-2. Operating Humidity: Ta= 35 °C, 90%RH (Non-condensing)
7-3. Operating Altitude: 0 - 14,000 feet (4267.2m)(Non-Operating)
8. DIMENSIONS (Physical dimension)
Width: 1028 mm.
Depth: 99.0mm
Height: 694.0mm
9. WEIGHT (Physical weight)
a. Net: 36.0+/-0.5kgs
b. Gross: 43+/-0.5kgs
Precaution
Please pay attention to the followings when you use this TFT LCD module.
9-1. MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted
stress) is not applied to the module. And the case on which a module is mounted
should have sufficient strength so that external force is not transmitted directly to
the module.
(3) Please attach the surface transparent protective plate to the surface in order to
protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist
external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable
because the former generates corrosive gas of attacking the polarizer at high
temperature and the latter causes circuit break by electro-chemical reaction.
CONFIDENTIAL – DO NOT COPY
Page 2-3
File No. SG-0211
(6) Do not touch, push or rub the exposed polarizes with glass, tweezers or anything
harder than HB pencil lead. And please do not rub with dust clothes with chemical
treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.(Some
cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or
other soft materials like chamois soaks with petroleum benzene. Normal-hexane
is recommended for cleaning the adhesives used to attach front / rear polarizers.
Do not use acetone, toluene and alcohol because they cause chemical damage to
the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with
polarizer causes deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
9-2. OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than
following voltage :
V=±200mV(Over and under shoot voltage)
(2) Response time depends on the temperature. (In lower temperature, it becomes
longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes
lower.)And in lower temperature, response time (required time that brightness is
stable after turned on) becomes longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes
damage to polarizer or electrical contacted parts. And after fading condensation,
smear or spot will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to
occur.
(6) Module has high frequency circuits. System manufacturers shall do sufficient
suppression to the electromagnetic interference. Grounding and shielding
methods may be important to minimize the interference.
CONFIDENTIAL – DO NOT COPY
Page 2-4
File No. SG-0211
9-3. HANDLING PRECAUTIONS FOR PROTECTION
(1) The protection film is attached to the bezel with a small masking tape. When the
protection film is peeled off, static electricity is generated between the film and
polarizer. This should be peeled off slowly and carefully by people who are
electrically grounded and with well ion-blown equipment or in such a condition,
etc.
(2) When the module with protection film attached is stored for a long time,
sometimes there remains a very small amount of glue still on the bezel after the
protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel surface or its
vestige is recognized, please wipe them off with absorbent cotton waste or other
soft material like chamois soaked with normal-hexane.
CONFIDENTIAL – DO NOT COPY
Page 3-1
File No. SG-0211
Chapter 3 On Screen Display
On Screen Display (OSD) is a friendly interface providing the function adjusting in our system.
Customers could operate it only by few buttons. There is the introduction of the OSD.
Main unit button
MENU OK
CH ▲ ↑
CH ▼ ↓
VOL + ←
VOL - →
Input
[MENU]
“MENU” button could star the OSD which could adjust the performance and set up the setting
between the different input sources. There are the structures.
TV Source
CONFIDENTIAL – DO NOT COPY
Page 3-2
File No. SG-0211
A. Picture：(Bold: Default)
a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
B. Audio：(Bold: Default)
a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)
CONFIDENTIAL – DO NOT COPY
Page 3-3
File No. SG-0211
C. TV：(Bold: Default)
a. Tuner Mode (Cable/Air)
b. Auto Search
c. Skip Channel
d. Digital Audio Out (PCM/Dolby Digital/OFF)
e. Time Zone (Eastern/Indiana/Central/Mountain/Arizona/Pacific/Alaska/Hawaii)
CONFIDENTIAL – DO NOT COPY
Page 3-4
File No. SG-0211
D. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
g. Rest All Setting (OK/Cancel)
CONFIDENTIAL – DO NOT COPY
Page 3-5
File No. SG-0211
E. Parental：(Bold: Default)
Password (Default => 0000)
a. Cannel Block
b. TV Rating
c. Move Rating
d. Block Unrated TV (NO/Yes)
e. Access Code Edit
CONFIDENTIAL – DO NOT COPY
Page 3-6
File No. SG-0211
RGB Mode
A. Picture Adjust：(Bold: Default)
a. Auto Adjust
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color Temperature (6500/9300/Custom)
f. H-Size (0~255, 127)
g. H-Position (0~100, 65)
h. V-Position (0~100, 49)
i. Fine Tune (0~31, 17)
CONFIDENTIAL – DO NOT COPY
Page 3-7
File No. SG-0211
B. Audio：(Bold: Default)
a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)
CONFIDENTIAL – DO NOT COPY
Page 3-8
File No. SG-0211
D. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
g. Rest All Setting (OK/Cancel)
CONFIDENTIAL – DO NOT COPY
Page 3-9
File No. SG-0211
AV / COMPONENT MODE
A. Picture：(Bold: Default)
a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
CONFIDENTIAL – DO NOT COPY
Page 3-10
File No. SG-0211
B. Audio：(Bold: Default)
a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)
CONFIDENTIAL – DO NOT COPY
Page 3-11
File No. SG-0211
C. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
g. Rest All Setting (OK/Cancel)
CONFIDENTIAL – DO NOT COPY
Page 3-12
File No. SG-0211
D. Parental：(Bold: Default)
Password (Default => 0000)
a. Cannel Block
b. TV Rating
c. Move Rating
d. Block Unrated TV (NO/Yes)
e. Access Code Edit
CONFIDENTIAL – DO NOT COPY
Page 3-13
File No. SG-0211
HDMI MODE
A. Picture：(Bold: Default)
a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
CONFIDENTIAL – DO NOT COPY
Page 3-14
File No. SG-0211
B. Audio：(Bold: Default)
a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)
CONFIDENTIAL – DO NOT COPY
Page 3-15
File No. SG-0211
C. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
g. Rest All Setting (OK/Cancel)
CONFIDENTIAL – DO NOT COPY
Page 3-16
File No. SG-0211
[INPUT]
“INPUT” could supply an interface providing a list. The list shows input sources and
provides the choices of different sources. The list includes items as below:
A. TV: Analog TV or digital TV
B. AV1, AV2: Composite (AV) signal
C. Component1, Component2: Color difference (YPbPr) video signals.
D. RGB: Video Graphics Array (VGA) or D-sub video signals.
E. HDMI1, HDMI2: High Definition Multimedia Interface (HDMI) multimedia signals.
Note： The list of PIP provides the choices of different sources on sub-screen.
[INFO]
“INFO” button could show an information bar which displays the information about the
input signal on our LCD TV.
CONFIDENTIAL – DO NOT COPY
Page 4-1
File No. SG-0211
Chapter4 Factory preset timings
This timing chart is already preset for the TFT LCD analog & digital display
monitors.
Resolution
Refresh
rate
Horizontal
Frequency
Vertical
Frequency
Horizontal
Polarity
Vertical
Polarity
Pixel
Rate
640x480 60Hz 31.5kHz 59.94Hz N N 25.175
640x480 75Hz 37.5kHz 75.00Hz N N 31.500
800X600 60Hz 37.9kHz 60.317Hz P P 40.000
800x600 75Hz 46.9kHz 75.00Hz P P 49.500
800X600 85Hz 53.7kHz 85.06Hz P P 56.250
1024x768 60Hz 48.4kHz 60.01Hz N N 65.000
1024X768 75Hz 60.0kHz 75.03Hz P P 78.750
720x400 70Hz 31.46kHz 70.08Hz N P 28.320
1366X768 60 47.7KHZ 60.00HZ P N 85.500
Remark: P: positive N: negative
CONFIDENTIAL – DO NOT COPY
Page 5-1
File No. SG-0211
Chapter5 Pin Assignment
The TFT LCD analog display monitors use a 15 Pin Mini D-Sub connector as
video input source.
Pin Description
1 Red
2 Green
3 Blue
4 Ground
5 Ground
6 R-Ground
7 G-Ground
8 B-Ground
9 +5V for DDC
10 Ground
11 No Connection
12 (SDA)
13 H-Sync (Composite Sync)
14 V-Sync
15 (SCL)
1
15
5
106
11
CONFIDENTIAL – DO NOT COPY
Page 5-2
File No. SG-0211
HDMI CONNECT PIN ASSIGNMENT
PIN SIGNAL ASSIGNMENT
1 TMDS Data2+
2 TMDS Data2 Shield
3 TMDS Data2-
4 TMDS Data1+
5 TMDS Data1 Shield
6 TMDS Data1-
7 TMDS Data0+
8 TMDS Data0 Shield
9 TMDS Data0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 Reserved (N.C on device)
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
CONFIDENTIAL – DO NOT COPY
Page 5-3
File No. SG-0211
Four-Pin mini DIN S-Video Connector
a. Pin Assignment
b. Signal Level Video (Y): Analog 0.1Vp-p/75
Video (C): Analog 0.286p-p/75
Sync (H+V): 0.3V below Video (Y)
c. Frequency H: 15.734KHz V: 60Hz (NTSC)
Signal Level Video (Y) : Analog 0.1Vp-p/75
Video (C) : Analog 0.286p-p/75
Sync (H+V): 0.3V below Video (Y)
Frequency H: 15.734Khz V: 60HZ (NTSC)
F-Type TV RF connector
a. Signal Level 60dBµV typical
b. System NTSC
c. Frequency 55~801MHz (NTSC)
PC connector 15 pin male D-sub connector
a. Pin Assignment Refer to Section 2.3.10
b. Signal Level Video (R, G, B): Analog 0.7Vp-p/75
Sync (H, V): TTL level
CONFIDENTIAL – DO NOT COPY
Page 5-4
File No. SG-0211
RGB Signal:
a. Sync Type TTL (Separate / Composite) or Sync. On Green
b. Sync polarity Positive or Negative
c. Video Amplitude RGB: 0.7Vp-p
d. Frequency H: support to 30K~70KHz
V: support to 50~85Hz
Pixel Clock: support to 110MHz
HDMI Signal (HDMI):
a. Pin Assignment Refer to HDNI Pin Assignment
b. Type A
c. Polarity Positive or Negative
d. Frequency
H: 15.734KHz V: 60Hz (NTSC-480i)
H: 31KHz V: 60Hz (NTSC-480p)
H: 45KHz V: 60Hz (NTSC-720p)
H: 33KHz V: 60Hz (NTSC-1080i)
Component signal (Component 1 and Component 2)
Component 1
a. Frequency H: 15.734KHz V: 60Hz (NTSC-480i)
H: 31KHz V: 60Hz (NTSC-480p)
H: 45KHz V: 60Hz (NTSC-720p)
H: 33KHz V: 60Hz (NTSC-1080i)
b. Signal level Y: 1Vp-p Pb: ±0.350Vp-p Pr: ±0.350Vp-p
c. Impedance 75
Component 2
a. Frequency H: 15.734KHz V: 60Hz (NTSC-480i)
H: 31KHz V: 60Hz (NTSC-480p)
H: 45KHz V: 60Hz (NTSC-720p)
H: 33KHz V: 60Hz (NTSC-1080i)
b. Signal level Y: 1Vp-p Pb: ±0.350Vp-p Pr: ±0.350Vp-p
c. Impedance 75
CONFIDENTIAL – DO NOT COPY
Page 6-1
File No. SG-0211
Chapter6 Main Board I/o Connections
J1 CONNECTION [Main BD to Power BD]
Pin Description
1 “POWRSW”
2 “+12V”
3 “+12V”
4 “+12V”
5 “+12V”
6 “GND”
7 “GND”
8 “GND”
9 “+5V”
10 “+5V”
11 “+5V”
12 “PWM”
13 “BL ON/OFF”
J2 CONNECTION [MAIN BD TO DISPLAY BD ]
Pin Description
1 “BL-RED”
2 “BL-WHITE”
3 “+5V”
4 “+5V”
5 “IR”
6 “GND”
7 “GND”
8 “KEYPAD-ADC1”
9 “KEYPAD-ADC2”
10 “+3.3V”
Loading...