VIZIO VR3 Remote User Manual
Table of Contents
Table of Contents
Table of ContentsTable of Contents
1.1 VIZIO Remote Control………………………………………………………………………………….. 3
1.1.1 Insertion of Batteries in the Remote Control...............................................................4
1.1.2 Remote Control Range...............................................................................................4
1.1.3 VIZIO Remote Control Precautions ............................................................................4
Version 8/8/2008 2
VIZIO VR3 Remote User Manual
1.1
1.1 VIZIO Remote Control
1.11.1
GUIDE – This button displays program information. Press this button once when in TV mode and the
information for the program being viewed is shown. Press it a second time and the Electronic
Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen
will display the selected input plus the resolution of the signal, e.g. HDMI 720p, HDMI 1080i, etc.
POWER – Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
HDMI – Press this button to select the HDMI input.
MUTE – This button turns the sound on and off.
TV – Press this button to select TV.
COMPONENT – Press this button to select the Component (YPbPr) input.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will return you to
the previous menu screen or to exit the OSD when pressed repeatedly.
AV – Press this button to select AV (either Composite or S-Video) input.
(MENU) – Use this button for the On-Screen Display (OSD) menu.
When it is used within a menu selection, the
feature to be adjusted after it has been highlighted.
VIZIO Remote Control
VIZIO Remote ControlVIZIO Remote Control
V
ball key will select the
-These labeled buttons are used to navigate the OSD menu. When
navigating the OSD menu, the arrows control the direction up and
down or left and right. They will also be used as value settings when
the slide bar is shown on the screen and option settings to turn a
feature on or off. When not using the OSD, these keys will control
Volume (up or down) and Channel (up or down). Channel up or
down will not function when a cable box or satellite receiver is being
used as the source of the signal.
NUMBER BUTTON PAD – Use these buttons to select a channel or enter
a password.
INPUT – This button allows the user to cycle through the inputs.
Repeatedly pressing of this button will step you through the input sources
in the following sequence: TV, AV1/S-VIDEO, AV2, Component 1,
Component 2, RGB, HDMI 1, HDMI 2 and HDMI 3.
- (DASH) – When selecting a digital channel directly use this button for the
separation of main and sub-channels. For example, channel 28-2 would
be selected by the button sequence 2 8 DASH 2.
Version 8/8/2008 3
VIZIO VR3 Remote User Manual
1.1.1
1.1.1 Insertion of Batteries in the Remote Control
1.1.11.1.1
Press and slide out the battery cover by following the direction shown by the molded arrow on the surface
of the cover.
Insert two AA batteries into the remote control. Match the (+) and (-) symbols on the batteries with the (+)
and (-) symbols inside the battery compartment.
Press and slide the battery cover back into place.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage
that may pose a risk of fire or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a risk of fire or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
Insertion of Batteries in the Remote Control
Insertion of Batteries in the Remote ControlInsertion of Batteries in the Remote Control
1.1.2
1.1.2 Remote Control Range
1.1.21.1.2
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
1.1.3
1.1.3 VIZIO Remote Control
1.1.31.1.3
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Remote Control Range
Remote Control RangeRemote Control Range
VIZIO Remote Control Precautions
VIZIO Remote ControlVIZIO Remote Control
Precautions
Precautions Precautions
Version 8/8/2008 4
VIZIO VR3 Remote User Manual
Version 8/8/2008 5
VIZIO VR3 Remote User Manual
Version 8/8/2008 6
Loading...