Vizio SB4021E-A0-NA User Manual

MODEL

SB4021E-A0-NA

VIZIO

QUICK

START

GUIDE

IMPORTANT SAFETY INFORMATION



Your Sound Bar is designed and manufactured to operate within deﬁned design limits, and misuse may result in electric shock or ﬁre. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference. Please heed all warnings and follow all instructions.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Sound Bar.

• When moving your Sound Bar from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Sound Bar to avoid causing ﬁre, electric shock, or component damage.

• Never push any object into the slots and openings on your Sound Bar enclosure. Do not place any objects on the top of your Sound Bar. Doing so could short circuit parts causing a ﬁre or electric shock. Never spill liquids on your Sound Bar.

• Your Sound Bar should be operated only from the type of power source indicated on the label on the AC/DC Adapters. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the speciﬁed voltage may cause ﬁre or electric shock

• The power cord must be replaced when using different voltage than the voltage speciﬁed. For more information, contact your dealer.

• Do not defeat the safety purpose of the grounded plug.

• When connected to a power outlet, power is always ﬂowing into your Sound Bar. To totally disconnect power, unplug the power cord.

• Do not overload power strips and extension cords. Overloading can result in ﬁre or electric shock.

• The wall socket should be located near your Sound Bar and be easily accessible

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Do not attempt to repair or service Sound Bar yourself. Opening or removing the front cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualiﬁed service personnel.

• Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates into your Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in ﬁre or electric shock.

• Do not use your Sound Bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Sound Bar yourself.

• Avoid using dropped or damaged appliances. If your Sound Bar is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Sound Bar may cause ﬁre or electric shock.

• Do not install your Sound Bar in an area with heavy dust or high humidity. Operating your Sound Bar in environments with heavy dust or high humidity may cause ﬁre or electric shock.

• Ensure that the power cord and any other cables are unplugged before moving your Sound Bar.

• When unplugging your Sound Bar, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause ﬁre or electric shock. When your Sound Bar will not be used for an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.

• If any of the following occurs, contact the dealer:

- The power cord fails or frays

- Liquid sprays or any object drops into your Sound Bar

- Sound Bar is exposed to rain or other moisture

- Sound Bar is dropped or damaged in any way

- The performance of your Sound Bar changes substantially

• Unplug the power cord before cleaning your Sound Bar. Clean only with dry cloth. Do not use a liquid or a spray cleaner on your Sound Bar. Do not use abrasive cleaners.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Sound Bar and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Sound Bar in a bookcase or cabinet unless proper ventilation is provided.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

• Your Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a third grounding pin). This plug will ﬁt only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-pronged, have an electrician install the correct outlet, or use an adapter to ground your Sound Bar safely.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories speciﬁed by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personal. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

• The Apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

• The main plug is used as the disconnect device, the disconnect device shall remain readily operable.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of WARNING symbols:

The lighting ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufﬁcient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

IMPORTANT SAFETY INFORMATION

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

The remote control supplied with this product contains a coin/button cell

battery. If the coin/button cell battery is swallowed, it can cause severe

internal burns in just two (2) hours and can lead to death.

Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it

WARNING

away from children.

If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

A warning that batteries (battery pack or batteries installed) shall not be

exposed to excessive heat such as sunshine, ﬁre, or the like.

DO YOU HAVE QUESTIONS?

LET US HELP!

YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT

The VIZIO support team is highly trained and is based in the United States.

We can help with:

•

New Product Setup

•

Connecting Your Devices

•

Technical Problems

•

And More

Phone:

Email:

Web:

Hours of operation: Monday - Friday: 5 am TO 9 pm Saturday - Sunday: 8 am TO 4 pm

We speak English • Se habla Español • Nous parlons Français

(877) 878-4946 (TOLL-FREE)

techsupport@VIZIO.com www.VIZIO.com/support

(pST)

PACKAGE CONTENTS

SUB +MUTESUB -

SRS

TVOL

TSHD

Sound Bar with Wireless Subwoofer

Power Adapter w/Cable for

Sound Bar

Power Cable for Subwoofer

Wall Mount Template

Wall Mount Brackets

Remote Control

with Battery

MODEL

SB4021E-A0

QUICK

START

GUIDE

VIZIO

This Quick Start Guide

Stereo RCA to 3.5mm

Audio Cable

Cables may vary slightly from those shown.

CONNECTIONS

BOTTOM OF SOUND BAR

Located on Side

Pairing Button

Service Port

(For Service Personnel use only)

Power Port

USB Port

Aux Input

(Stereo 3.5mm)

Aux Input

(Stereo RCA)

Optical Input

FIRST-TIME SETUP

AUDIO OUT

BACK OF YOUR TV*

CHOOSE A METHOD

Connect the included Stereo Cable to a

TV audio output as shown.

BOTTOM OF SOUND BAR

*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.

BOTTOM OF SOUND BAR

3 4

BACK OF SUBWOOFER

Sound Bar is centered

below the TV.

When using the remote, point it at the center of the Sound Bar. The

sensor is located there.

Subwoofer can be placed anywhere in the room within 60 feet of the Sound Bar. Placement near a corner of the will produce more bass in the room.

For the best surround sound experience, position the components as shown.*

The Sound Bar should be close to ear level.

Gently pull the plastic tab from the back of the remote control.

(The plastic tab can be thrown away)

Turn your TV on, then press the Power button on the

remote to turn the Sound Bar on.

Press the Input button to cycle through the audio inputs. For example, if you connected your TV to Aux 1, set the

Sound Bar to Aux 1.

Setup is complete.

Power

Input

SRS

TVOL

SUB +MUTESUB -

SRS

TSHD

USING THE REMOTE

Press to turn on or off.

Power

Play/Pause/Mute

Press to play/pause.

Press to mute.

Fast Rewind/Back/SUB -

Press and hold to fast rewind. (USB Mode)

Press to return to previous track. (USB Mode)

Press to decrease subwoofer volume.

SRS TruVolume

Press to enable/disable SRS TruVolume.

Input

Press to change input source.

When using the remote, point it at the center of the Sound Bar. The sensor is located there.

Volume Up

Press to increase volume.

Fast Forward/Next/SUB +

Press and hold to fast forward. (USB Mode)

SUB +MUTESUB -

Press to advance to next track. (USB Mode) Press to increase subwoofer volume.

Volume Down

Press to decrease volume.

SRS TruSurround HD

SRS

TVOL

SRS

TSHD

Press to enable/disable SRS TruSurround HD.

If your remote stops responding, you may need

to replace the battery.

To replace the battery, insert a flat-head screwdriver into the slot as shown. Gently push down on the tab, then press and pull downward

on the battery cover to open.

+ 28 hidden pages