PQ65-F1
Table of contents
Loading...
FPO
USER MANUAL
Model PQ65-F1
Safety & Certication
THANK YOU FOR CHOOSING VIZIO
And congratulations on your new VIZIO TV.
To get the most out of your new VIZIO product, read these instructions
before using your product and retain them for future reference. Be
sure to inspect the package contents to ensure there are no missing or
damaged parts.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services for
your VIZIO product, visit our website at www.VIZIO.com or call toll free at
(877) 698-4946.
We recommend that you register your VIZIO product at www.VIZIO.
com.
Extended Warranties
For peace of mind, and to protect your investment beyond the standard
warranty, VIZIO oers on-site extended warranty service plans. These
plans provide additional coverage during the standard warranty period.
To purchase an extended warranty service plan, visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
When you see this symbol, please read the
accompanying helpful tip.
IMPORTANT SAFETY INSTRUCTIONS
Your TV is designed and manufactured to operate within dened
design limits. Misuse may result in electric shock or re. To prevent
your TV from being damaged, the following instructions should be
observed for the installation, use, and maintenance of your TV. Read
the following safety instructions before operating your TV. Keep these
instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage,
switch o the power before connecting other components to
your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specied by the
manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to
an area of high temperature, condensation may form in the
housing. Wait before turning on your TV to avoid causing re,
electric shock, or component damage.
• A distance of at least three feet should be maintained between
your TV and any heat source, such as a radiator, heater, oven,
amplier etc. Do not install your TV close to smoke. Operating
your TV close to smoke or moisture may cause re or electric
shock.
• Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
your TV and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your TV in a
bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your TV
cabinet. Do not place any objects on the top of your TV. Doing
so could short circuit parts causing a re or electric shock.
Never spill liquids on your TV.
• Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the type
of power supplied to your home, consult your dealer or local
power company.
• Do not apply pressure or throw objects at your TV. This may
compromise the integrity of the TV. The manufacturer’s
warranty does not cover user abuse or improper installations.
• The power cord must be replaced when using dierent voltage
than the voltage specied. For more information, contact your
dealer.
• When connected to a power outlet, power is always owing
into your TV. To totally disconnect power, unplug the power
ii
cord.
• The lightning ash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sucient magnitude
to constitute a risk of electric shock to persons.
• Do not overload power strips and extension cords.
Overloading can result in re or electric shock.
• The wall socket should be installed near your TV and easily
accessible.
• Only power of the marked voltage can be used for your TV.
Any other voltage than the specied voltage may cause re or
electric shock.
• Do not touch the power cord during lightning. To avoid electric
shock, avoid handling the power cord during electrical storms.
• Unplug your TV during a lightning storm or when it will not be
used for long period of time. This will protect your TV from
damage due to power surges.
• Do not attempt to repair or service your TV yourself. Opening
or removing the back cover may expose you to high voltages,
electric shock, and other hazards. If repair is required,
contact your dealer and refer all servicing to qualied service
personnel.
• WARNING: Keep your TV away from moisture. Do not expose
your TV to rain or moisture. If water penetrates into your TV,
unplug the power cord and contact your dealer. Continuous use
in this case may result in re or electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or
odor becomes apparent, unplug the power cord and contact
your dealer immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV
is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use
of your TV may cause re or electric shock.
• Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy dust
or high humidity may cause re or electric shock.
h
• Follow instructions for moving your TV. Ensure that the power
cord and any other cables are unplugged before moving your
TV.
• To prevent injury, this apparatus must be securely attached to
the oor/wall in accordance with the installation instructions.
• When unplugging your TV, hold the AC/DC power adapter, not
the cord. Pulling on the power cord may damage the wires
inside the cord and cause re or electric shock. When your TV
will not be used for an extended period of time, unplug the
power cord.
• To reduce risk of electric shock, do not touch the connector
with wet hands.
• Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can damage
the remote control or injure the operator. Do not expose
batteries to excessive heat such as sunshine, re or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or splashing
and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
• The mains plug or appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
• CAUTION: These servicing instructions are for use by qualied
service personnel only. To reduce the risk of electric shock,
do not perform any servicing other than that contained in the
operating instructions unless you are qualied to do so.
• The lightning ash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
h
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sucient magnitude to
constitute a risk of electrical shock to persons.
• WARNING: Exposure to loud sounds can damage your hearing
causing hearing loss and tinnitus (ringing or buzzing in the
ears). With continued exposure to loud noises, ears may
become accustomed to the sound level, which may result
in permanent damage to hearing without any noticeable
discomfort.
• Install the TV where it cannot be pulled, pushed or knocked
over.
• Do not allow children to hang onto the product.
• Store the accessories (remote, batteries, etc.) in a location
safely out of the reach of children.
• The American Academy of Pediatrics discourages
television viewing for children younger than two
years of age.
• WARNING: Never place a television set in an
unstable location. A television set may fall, causing
serious personal injury or death.
• Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the television
set.
• Ensuring the television set is not overhanging the edge of
the supporting furniture.
• Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials
that may be located between the television set and the
supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
• If your existing television set is being retained and relocated,
the same considerations as above should be applied.
• WARNING: To prevent injury, this apparatus must be securely
attached to the oor/wall in accordance with the installation
instructions.
iii
TELEVISION ANTENNA CONNECTION PROTECTION
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it
is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
Power Lines
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Do not locate the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits. Remember, the
screen of the coaxial cable is intended to be connected to earth in
the building installation.
Electric Service Equipment
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
iv
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS, the
Symbol, DTS and the Symbol together, and DTS Studio
Sound II are registered trademarks and/or trademarks of
DTS, Inc. in the United States and/or other countries. ©
DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
v
Table Of Contents
Table Of Contents
Getting to Know Your TV .............................................7
Front Panel .......................................................................................... 7
Rear Panel ...........................................................................................8
Wall-mounting the TV ......................................................................... 9
Using the remote ................................................................................ 10
Completing The First-Time Setup ...............................11
Using the On-Screen Menu .........................................12
Navigating the On-Screen Men .......................................................... 12
To open the on-screen menu: ...........................................................12
Changing the Input Source ................................................................ 12
Changing the Screen Aspect Ratio .....................................................13
Adjusting the Picture Settings ............................................................ 14
Adjusting More Picture Settings ..................................................... 15
Adjusting the Color Temperature ................................................... 15
Adjusting the Picture Mode Edit Settings ......................................16
Saving a Custom Picture Mode .......................................................16
Locking/Unlocking a Custom Picture Mode ................................... 16
Deleting a Custom Picture Mode .................................................... 17
Resetting a Picture Mode ................................................................ 17
Adjusting the Color Tuner Settings ................................................18
Adjusting the Audio Settings .............................................................. 21
Adjusting the network Settings .......................................................... 22
Setting Timers ..................................................................................... 24
Setting the Timer ............................................................................. 24
Setting the Auto Power O Feature ...............................................24
Using the Blank Screen Feature .....................................................24
Setting Up Channels ........................................................................... 25
Scanning for Channels ....................................................................25
Skipping Channels ...........................................................................25
Listening to Alternate Audio ..............................................................26
Changing the Analog Audio Language ...........................................26
Parental controls ................................................................................27
Using Parental Controls ..................................................................27
Enabling or Disabling Program Ratings .........................................27
Locking and Unlocking Channels .................................................... 27
Blocking and Unblocking Content by Rating .................................27
Setting Up Closed Captioning ............................................................ 28
Changing the Appearance of Digital Closed Captions ..................28
Renaming Devices on the Input Menu .............................................. 30
Changing the TV Settings ................................................................... 31
Viewing System Information ........................................................... 31
Changing the On-Screen Menu Language .....................................31
Setting the Time and Local Settings ...............................................32
Adjusting the CEC Settings .............................................................. 32
Adjusting the Power Mode .............................................................. 32
Changing the TV Name .................................................................... 33
Managing Mobile Devices ...............................................................33
Using the Reset & Admin Menu ......................................................... 34
Restoring the TV to Factory Default Settings ................................. 34
Turning the Power Indicator On or O .......................................... 34
Using the Info Window .......................................................................36
What is SmartCast TV
What can you do with SmartCast TVSM: .......................................... 37
How to Launch SmartCast TV
SmartCast TV
SM ......................................................................................................... 37
SM
? ..................................................................37
SM .................................................................................................... 37
Playing USB Media .......................................................38
Displaying USB Media .........................................................................38
Preparing Your USB Drive to Play USB Media ...............................38
Removing the USB Drive from the TV ............................................38
Troubleshooting & Technical Support ........................42
Specications ...............................................................46
Regulatory Information ...............................................47
Limited Warranty .........................................................48
Legal Information.........................................................50
vi
Getting to Know Your TV
FRONT PANEL
1
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator ashes on when the TV turns on, then goes out after several seconds.
To keep the power indicator on as long as the TV is on, see
Turning the Power Indicator On or O.
FRONT PANEL
7
USB - Connect a USB thumb drive to play photo, music, or video.
Component - Connect a component.
1
REAR PANEL
HDMI - Connect an HDMI device.
Optical Audio Out - Connect to an optical/SPDIF audio device, such as home audio receiver.
Audio Out - Connect to an RCA device, such as sound bar.
Coaxial - Connect to a coaxial cable from cable, satellite, or antenna.
Ethernet - Connect an Ethernet cable to modem/ router.
Power - Press to turn on the TV. Press and hold to turn the TV o.
Volume - Press to increase or decrease the TV volume level.
Input - Press to access the input menu.
..
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
8
8
WALL-MOUNTING THE TV
To mount your TV on a wall, you will need a wall mount. Consult the
information on this page to nd the appropriate mount for your TV.
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have
the correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, at, stable surface. Be sure the
surface is clear of debris that can scratch or damage the TV.
3. Remove the stands by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following the
instructions that came with your mount. Use only with a UL-listed wall
mount bracket rated for the weight/load of this TV.
1
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
PQ65-F1
Screw Size: M6
Hole Depth: 14 mm
Hole Pattern: 400 mm x 400 mm
Weight w/o Stand: 54.06 lb (24.52 kg)
9
1
USING THE REMOTE
1
3
4
6
7
10
15
17
18
11
12
13
2
98
14
16
19
Replacing the Batteries
5
1. Input - Change the currently displayed input
2. Power - Turn Television on or o
3. App Launcher - Quickly launch the pictured app
4. Exit - Close the on-screen menu
5. Menu - Display the settings menu
6. Arrow - Navigate the on-screen menus
7. OK/Play/Pause - Select the highlighted menu option and play or pause content
8. Back - Go to the previous on-screen menu
9. Info - Display the info window
10. Volume Up/Down - Increase or decrease the loudness of the audio
11. Closed Caption - Open the closed caption menu
12. V Button - Launch SmartCast TV/Return to SmartCast TV Home Screen
13. Pic - Cycle through the dierent picture setting modes
14. Channel Up/Down- Change the channel
15. Mute - Turn the audio on or o
16. Last - Return to the channel last viewed
17. Number Pad - Manually enter a channel
18. Wide - Change the Television mode
19. Dash - Use with number pad to manually enter a digital sub-channel. (For exam-
ple, 18-4 or 18-5)
1. Find the notch on the back of the remote. Insert a coin and pry open the back
cover.
2. Insert two batteries into the remote control. Make sure that the (+) and (-)
symbols on the batteries match the (+) and (-) symbols inside the battery
compartment.
3. Replace the battery cover.
In many places batteries cannot be thrown away or discarded with household waste. Please ensure you
properly dispose of your batteries consistent with the laws and/or regulations where you live. For more
information please visit https://www.duracell.com/en-us/technology/battery-care-use-and-disposal
WARNING: keep the remote control batteries away from children. It may
cause choking and/or lead to a re or chemical burn if mishandled. Do not
dispose of batteries in re. Replace only with batteries of the correct type.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
REMOTE CONTROL
10
The rst time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:
Before you begin the rst-time setup:
• Your Television should be installed and the power cord should be connected to an electrical outlet.
• If you have a wireless network, have the network password ready.
• If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television.
2Completing The First-Time Setup
Choose a language for your TV.
English
Español Français
Back
Français
Choose a Wi-Fi Network.
How are you using your TV?
Home Use
Store Demo
Where is you VIZIO TV located?
USA
Mexico Canada
Choose a Wi-Fi Network.
Home Network
Let’s set up local channels.
To search for local broadcast channels, make sure the cable from the
antenna, wall or cable box is properly connected to your VIZIO TV.
Choose a Wi-Fi Network.
Skip
Next
Public Wi-Fi John’s Network Ana’s Network Encrypted
1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password.
Let’s set up local channels.
To search for local broadcast channels, make sure the cable from the
antenna, wall or cable box is properly connected to your VIZIO TV.
Skip
Next
Your use of this device and software functionality are covered by VIZIO and Google ‘s respective Terms of Service and Privacy Policies.
By pressing “Accept All”, you agree to be bound by the (i) VIZIO Terms of Service and Privacy Policy and (ii) the Google Terms of Service and Privacy
Policy. NOTE: Accepting the terms and policiesis a condition of using the Cast functionality of this device.
VIZIO Terms &
Conditions
Terms & Conditions.
VIZIO Privacy
Policy
Skip For Now Accept All
Google Privacy
Policy
Google Terms &
Conditons
Congratulations!
Start streaming your favorite
shows now!
Start Watching
By the way...
You can turn your phone into the ultimate remote. The
VIZIO SmartCast
and more from multiple apps into one simple experience.
Download now from the App Store or Google Play.
TM
App brings together TV Shows, movies,
Family Room
Which room is your VIZIO TV Located?
Living Room
Master
Add Custom Location
Bedroom Game Room
5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set!
11
Using the On-Screen Menu
3
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the Menu button on the remote.
From this menu, you can:
• Adjust the Picture settings
• Adjust the Audio settings
• Adjust the Network settings
• Set up the Timers
• Adjust the Channel settings
• Set up Closed Captioning
• Name and adjust Inputs
• Adjust TV settings
• View user manual
TV Settings
Picture
Audio
Network
Timers
Channels
Closed Captions
Input Settings
System
User Manual
NAVIGATING THE ON-SCREEN MEN
To open the on-screen menu:
1. press the Menu button on the
remote.
2. Use the Arrow buttons to
highlight a menu option, and
press the OK button to select
that option.
CHANGING THE INPUT SOURCE
External devices such as DVD players, Blu-ray Players, and video game
consoles can be connected to your TV. To use one of these devices
with your TV, you must rst change the input source using the Input
menu.
1
2
To change the input sources:
1. Press the Input button on the remote. The Input menu is displayed.
2. Use the Right/Left Arrow buttons or the Input button on the
remote to highlight the input you wish to view and press OK. The
selected input is displayed.
Input Name
While navigating the on-screen menu, you can
press the Back button at any time to return to the
previous menu screen. The Exit button will close the onscreen menu.
Change Input
SMARTCAST
You can change the input names that appear on the
Input menu to make your devices easy to recognize.
See
information.
HDMI-1 HDMI-2 COMP TV
Renaming Devices on the Input Menu
HDMI-3 HDMI-4 HDMI-5
Actual inputs may vary by TV.
for more
12
CHANGING THE SCREEN ASPECT RATIO
3
The TV can display images in four dierent modes: Normal,
Panoramic, Wide, and Zoom. Each mode displays the picture
dierently.
Some programs have black bars on the top or sides of the picture
so that the picture keeps its original shape. Examples include
wide-screen movies and older television programs.
To change the screen aspect ratio:
1. Press the Wide button on the
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
• Normal preserves the content’s
original aspect ratio and size.
• Strech stretches a 4:3 aspect ratio picture to the left
and right edges of the screen. The center of the image is
not stretched, but the sides of the image are extremely
stretched. If you are watching widescreen (1.85:1 or 2.35:1)
content with black bars on the top and bottom, the black
bars will still appear on the top and bottom of the TV
image.
Normal
Tip: The aspect ratio cannot be changed for Ultra HD
content or HDR content.
Panoramic
Note: Aspect ratio settings may vary by Input source.
Wide
Zoom
• Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted—gures appear short and fat.
If the program is already formatted for widescreen viewing
(1.85:1 or 2.35:1), then black bars will appear on the top
and bottom of the TV image.
• Zoom expands images evenly in all directions (33% taller
and 33% wider) with black bars to t the screen. A 720p
image will ll a 1080p screen.
13
3
ADJUSTING THE PICTURE SETTINGS
Your TV can be adjusted to suit your preferences and viewing
conditions.
If you save changes to the settings for a picture mode, an
asterisk appears after its name (see
Mode
).
To adjust the picture settings:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Picture and
press OK. The PICTURE menu is displayed.
Saving a Custom Picture
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
• Standard mode sets the
picture settings to the
default settings.
• Calibrated mode sets the
picture settings to values
ideal for watching TV in a
brightly-lit room.
• Calibrated Dark mode sets
the picture settings to values
ideal for watching TV in a
dark room.
• Vivid mode sets the picture
settings to values that
produce a brighter, more
Picture
Picture Mode Vivid
Auto Brightness Control Off
Backlight 90
Brightness 50
Contrast 50
Color 50
Tint 0
Sharpness 20
More Picture
Picture Mode Edit
Color Calibration
vivid picture.
• Game mode reduces
throughput delays and
optimizes the picture settings
for displaying game console
output.
• Computer mode optimizes the picture settings for
displaying computer output.
Back
4. To manually change each of the picture settings, use the Up/
Down Arrow buttons on the remote to highlight that picture
setting, then use the Left/Right Arrow buttons to adjust the
setting:
• Auto Brightness Control - The auto brightness control detects
the light levels in the room and automatically adjusts the
backlight for the best picture. Select O, Low, Medium, or
High.
• Backlight - Adjusts the LED brightness to aect the overall
brilliance of the picture. Backlight cannot be adjusted when
starting from some picture modes.
• Brightness - Adjusts the black level of the picture. When this
setting is too low, the picture may be too dark to distinguish
details. When this setting is too high, the picture may appear
faded or washed out.
• Contrast - Adjusts the white level of the picture. When this
setting is too low, the picture may appear dark. When this
setting is too high, the picture may appear faded or washed
out. If the setting is too high or too low, detail may be dicult
to distinguish in dark or bright areas of the picture.
• Color - Adjusts the intensity of the picture colors.
• Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the esh tones in the picture. If esh appears too
orange, reduce the level of color before adjusting tint.
• Sharpness - Adjusts the edge sharpness of picture elements.
It can be used to sharpen non-HD (high denition) content;
however, it will not produce detail that does not otherwise
exist.
5. When you have nished adjusting the picture settings, press
the Exit button on the remote.
14
3
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
More Picture
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
• Color Temperature -
See
Adjusting the Color
Temperature.
• Black Detail - Adjusts the
average brightness of the
Color Temperature Normal
Black Detail Off
Xtreme Black Engine Pro™ Low
Reduce Judder 5
Reduce Motion Blur
Clear Action Off
Reduce Noise
Game Low Latency Off
Film Mode On
Color Space Auto
Gamma 2.1
picture to compensate for
large areas of brightness.
Select O, Low, Medium, or
High.
• Xtreme Black Engine Pro™ - Based on the content,
dynamically adjusts and balances the brightness and the
contrast ratio of the picture by locally adjusting backlight
zones.
Back
5
limtis the range for the Backlight setting.
• Reduce Noise - Opens a sub-menu with two settings:
• Reduce Signal Noise - Diminishes artifacts in the
image caused by the digitizing of image motion content.
Select O, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
for mpeg les. Select O, Low, Medium, or High.
• Game Low Latency - Select On to reduce video delay (lag)
when gaming.
• Film Mode - Optimizes the picture for watching lm. Select
Auto or O.
• Color Space - Select Color Space for the source. Video
sources uses YCbCr, but PC uses RGB.
• Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
3. When you have nished adjusting More Picture Settings, press the
Exit button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
Back
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
Color Temperature
Normal
Cool
Computer
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
• Normal is optimized for
television viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the
picture for use as a
PC monitor.
3. When you have nished adjusting the color temperature,
press the Exit button on the remote.
• Reduce Judder - Increases frame rate to reduce judder for
lm and 30 hertz video. As the setting increases, judder is
reduced.
• Reduce Motion Blur - Increases frame rate to reduce
motion blur of 60 hertz video. As the setting increases,
motion blur is reduced.
• Clear Action - Reduces blur in scenes with fast action but
15
3
Adjusting the Picture Mode Edit Settings
Picture Mode Edit Settings allow you to make precise adjustments
to the picture and to create picture modes to save groups of picture
settings.
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight Picture
Mode Edit, and then press OK.
The PICTURE MODE EDIT menu is
displayed.
Picture Mode Edit
Save Picture Mode
Lock Picture Mode
Reset Picture Mode - Vivid
Back
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press OK to change
the setting:
• Save Picture Mode - Save a
custom picture mode.
• Lock Picture Mode - Prevent
changes to custom picture
modes. Choose between On or
O.
• Reset Picture Mode -
Standard
†
- Reset the picture
mode settings to factory
default values.
Saving a Custom Picture Mode
Custom picture modes allow you to save a group of custom settings
for various viewing conditions and video sources.
• Changes made while on any preset picture mode will add an
asterisk on the top right corner of the preset mode.
• The custom picture mode is not automatically saved.
To save a custom picture mode:
1. From the PICTURE MODE EDIT
Save Picture Mode
Back
menu, use the Arrow buttons
to highlight Save Picture
Mode, and then press OK. The
SAVE PICTURE MODE menu is
displayed.
2. Use either on-screen keyboard
to enter a name for your custom
a b c d e f g h i
j k l m n o p q r
s t u v w x y z 0
1 2 3 4 5 6 7 8 9
.@# äêí Space
picture mode.
3. Highlight Save and press OK.
Save
4. Press the Exit button to exit the
menu screens.
Locking/Unlocking a Custom Picture Mode
Custom picture modes can be locked/unlocked with a unique PIN to
prevent accidental changes to their settings.
To lock all custom picture modes:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Lock Picture
Mode, and then press OK. The
System PIN code
Change the PIN used for the System PIN.
Back
LOCK PICTURE MODE menu is
displayed.
New PIN
2. Use the Number Pad on your
remote to enter a unique 4-digit
PIN. If a system PIN is set, then
Conrm PIN
lock/unlock. If no system PIN is
set, then you will be prompted
to set a PIN.
3. Highlight Save and press OK.
Cancel
Enter the 4-digit PIN using the numbers keys on
the remote.
Save
4. Press the Exit button to exit the
menu screens.
To unlock all custom picture modes:
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Lock Picture
Mode, and then press OK. The
LOCK PICTURE MODE menu is
displayed.
†
Only available on customized preset modes.
2. Use the Arrow buttons to select O.
3. Use the Number Pad on your remote to enter your 4-digit PIN.
4. Make any desired changes to the picture modes.
5. Then turn ON Lock Picture Mode.
6. Press the Exit button to exit the menu screens.
16
Loading...