Vizio M190VA, M220VA-W, M220VA, M190VA-W, M260VA-W User Manual

...

CONNECTING TO DEVICES

YOU DESERVE

The inputs listed in the BEST column are OPTIMIZED for High Definition Video

HDTV TIPS

Make sure you have components with HDMI

M190VA / M190VA-W / M220VA / M220VA-W

M260VA / M260VA-W LCD LED HDTV

BEFORE YOU BEGIN

THE BEST!

CONNECTION

ADVICE

HIGHEST DIGITAL

PICTURE QUALITY

QUALITY PICTURE

HDMI

and Audio. Connect using these inputs wherever possible.

GOOD

AV/S-VIDEO

DTV/TV

BETTERBEST

ANALOG HD

QUALITY PICTURE

COMPONENT

LOW RESOLUTION

NOT RECOMMENDED

outputs to ensure the BEST possible picture.

SATELLITE / CABLE GAMING CONSOLE

BLU-RAY

™

/ DVD

3 WAYS TO WATCH

HIGH DEFINITION VIDEO

What’s In the Box

• VIZIO HDTV

• VIZIO Remote Control (including 2 AA batteries)

• User Manual (read Safety Guidelines)

• Registration Card

• Quickstart Guide

• Screen Cleaning Cloth

INSTALLING YOUR HDTV

CONNECTION TYPE

CONNECTOR IMAGE

1. Get a VIZIO Blu-ray™ Disc Player.

2. Contact your cable company or satellite provider to learn more about HD programming in your local area (an HD cable box or satellite receiver may be required).

3. You may be able to get HD signals using an off-air antenna. To see if you can receive off-air HD signals, and for help choosing the right antenna, visit

We provide professional installation services. Visit www.VIZIO.com or call (888) 849.4623 to order today!

Attaching the Stand Base to the TV

1. Place the TV face down on a soft, flat surface.

2. Align the stand hooks with the holes at the bottom surface of TV.

3. Push the base gently into place. A snap sound could be heard, it means that the base is locked into place.

4. Move the TV into an upright position and place so that the rear connectors remain accessible.

(see fig. 1)

(see fig. 2)

FIG. 1

FIG. 2

MAKE THE BEST HIGH DEFINITION CONNECTION!

HDMI (BEST)

SPDIF

AUDIO

RGB PC

COMPONENT (BETTER)

DTV/TV

VIZIO HIGH DEFINITION CABLES

For more information about VIZIO Certified* High Definition cables please visit us at: www.VIZIO.com

AV (GOOD)

YOUR VIZIO TV EVEN

HAS EASY TO ACCESS SIDE INPUTS

www.antennaweb.org

HIGH DEFINITION HOME THEATER

Preparing the TV for Wall Mounting - please refer to "Wall mounting your HDTV" in your User Manual for more information.

MATCH YOUR VIZIO TO A

CERTIFIED* WALL MOUNT

Y Pb/Cb Pr/Cr L R

BACK OF TV

POWER THE TV

Turn on your TV by pressing the Power button on

USB

VIZIO Blu-ray

Bring your movies to life!1080p Full HD playback delivers crystal clear images with lifelike detail and High Definition Audio puts you in the center of the action.Visit

www.VIZIO.com for more details.

™

TILT MOUNT VMT13-30 SWING MOUNT VMA13-26

*Tested and certified by VIZIO engineers for compatibility with your TV.

either the TV or the remote control

HIGH-DEFINITION SOUND

Complete your total Home Theatre experience with stunning audio from VIZIO accessories such as the Sound Bar with Wireless Subwoofer.

Visit www.VIZIO.com or call (888) 849.4623.

M190VA, M190VA-W

M220VA, M220VA-W M260VA, M260VA-W

SETUP (Cont.)

1. The Initial Setup menu should appear on-screen (see Fig. 1). Use your remote control to

Fig. 1

Initial Setup

Please select your input location:

Mode Setting

Home

Retail

LCD LED HDTV QUICKSTART GUIDE

HELP TOPICS

follow the directions on the HDTV. Be sure to insert the batteries in your remote first.

2. Select your desired language

3. Choose Home Mode for optimal energy savings.

(see Fig. 2).

IF YOU USE A CABLE OR SATELLITE BOX:

1. Exit the Setup Wizard.

2. Select the input source for the device you are connecting to your HDTV.

3. You’re done! Enjoy the show.

NextBack Select

Fig.2

Initial Setup

Please select your language: English

NextBack Select Exit

Fig. 3

Initial Setup

Please select your input source:

NextBack Select

Español

Français

Antenna

Cable

EXIT

Exit

Language

EXIT

Tuner

EXIT

Exit

PROGRAM YOUR CABLE OR SATELLITE REMOTE

Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program your Cable or Satellite remote.

SERVICE PROVIDER

CABLE 11758, 10178, 10128 1758, 0178, 0128

DIRECT TV

DISH NETWORK 627

5-DIGIT CODES 4-DIGIT CODES 3-DIGIT CODES

11758, 10178, 10128 1758, 0178, 0128

IF YOU USE A CABLE FROM THE WALL OR AN ANTENNA TO RECEIVE TV CHANNELS:

1. Choose between Antenna or Cable to match your input source (see Fig. 3).

2. Begin the scan for channels

Note: Your Service Provider may provide access to HD channels during the channel scan. Please be patient and wait for 100% completion.

3. Once the scan is complete, follow the on-screen instruction to exit the Initial Setup menu

(see Fig. 5).

(see Fig. 4).

Fig. 4

Initial Setup

Channel Scan will take a few minutes to complete.

Status: Scanning.. Analog Channels: 0 Digital Channels: 4

Fig. 5

Initial Setup

Congratulations !!

Initial Setup completed

Back Next

Channel Scan

EXIT

Exit

Complete

PROBLEM SOLUTION

Make sure the power button is ON . Make sure the AC power cord is securely connected to the AC socket and try plugging the TV

No Power

directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is supplying power.

For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition

Picture is blurry or fuzzy/

from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that

image quality issues

is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.

EXTENDED WARRANTIES

Protect your VIZIO product with up to 5 years of added

repair service! Extended coverage begins when the

manufacturer's warranty expires so you’ll receive

maximum protection!

Visit us online at:

www.VIZIO.com

or Call:

LEARN MORE

Refer to your User Manual for in-depth descriptions or

more information.

and special offers.

Cannot change channels up and down with direct cable hookup from wall or antenna

Cannot return to the Setup Wizard

Screen is displaying blue/no signal and/or turning off after a few seconds

Panoramic mode is not available

Press the MENU button. Use the arrows to navigate to the TV TUNER MENU. Highlight the first option, called Tuner Mode. Select the appropriate input by using the left and right arrows. Once Tuner Mode is correct, highlight "AutoSearch", then press the right arrow.

The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU button to access them. For channel scan, see the above topic.

Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for the image to reappear.

When the TV displays an HD resolution the Panoramic viewing mode will not be available.

(888) 849. 4623

For more info on Extended Warranties

www.VIZIO.com

Black or gray bars on top, bottom, and/or sides of picture

Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more information, please contact your service provider.