Vizio D39h-C0 User Manual

VIZIO
USER MANUAL
Model: D39h-C0
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov.
Welcome
THANK YOU FOR CHOOSING VIZIO
Congratulations on the purchase of your new VIZIO HDTV.
To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at (877) 698-4946.
We recommend that you either:
• Register your VIZIO product at www.VIZIO.com
• Complete and mail the enclosed registration card
Extended Warranties
For peace of mind, and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans provide additional coverage during the standard warranty period. To purchase an extended warranty service plan, visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
When you see this symbol, please read the accompanying helpful tip.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.
• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
• The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
• When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be installed near your TV and easily accessible.
• Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.
• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer.
Continuous use in this case may result in fire or electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock.
• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock.
• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.
• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.
• This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
• The lightning flash with arrowhead symbol within an
h
equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
TELEVISION ANTENNA CONNECTION PROTECTION
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
Ground Clamp
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.
Antenna Lead In Wire
Electric Service Equipment
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductors (NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System (NEC ART 250, part H)
Table of Contents
Installing the TV .................................................3
Inspecting the Package Contents ...................3
Installing the TV ..................................3
Installing the TV Stand ......................................................3
Installing the TV on a Wall ................................................. 6
Controls and Connections ...............................7
Back Panel ..................................... 7
Side Panel ...................................... 8
Front Panel .....................................9
Replacing the Batteries ..................................................11
Connecting Your Devices ................................ 12
Connecting A Device ............................ 12
Connecting a Device - Audio and Video Cable Types ..13
Connecting an Audio Device .....................15
Connecting an Audio Device - Audio Cable Types .....16
Connecting an Audio Device - ARC. . . . . . . . . . . . . . . . . 17
Completing the First-Time Setup ..................... 18
Using the On-Screen Menu .............................19
Navigating the On-Screen Menu ................... 19
Changing the Input Source .......................20
Changing the Screen Aspect Ratio ................. 20
Viewing Video with the Menu Open ................21
Adjusting the Picture Settings ..................... 22
Adjusting the More Picture Settings ...............................23
Adjusting the Picture Mode Edit Settings .......................24
Adjusting the Color Calibration Settings ........................25
Adjusting the Color Tuner Settings .................................25
Creating a Custom Picture Mode ..................................28
Locking and Unlocking the Custom Picture Modes .......29
Deleting a Custom Picture Mode ...................................29
Adjusting the Audio Settings ......................30
Changing the Equalizer Settings ....................................31
Deleting the Custom Audio Mode .................................. 31
Setting Timers .................................. 32
Setting the Sleep Timer ...................................................32
Setting the Auto Power Off Feature .................................32
Setting Up Channels ............................33
Selecting a Channel Source ..........................................33
Finding Channels ............................................................33
Adding New Channels ...................................................34
Skipping Channels..........................................................35
Listening to Alternate Audio .......................36
Changing the Analog Audio Language ........................36
Changing the Digital Audio Language .......................... 36
Setting Up Closed Captioning .....................37
Changing the Appearance of Digital
Closed Captions .............................................................37
Renaming Devices on the Input Menu ..............39
Changing the TV Settings ......................... 40
Viewing System Information ...........................................40
Changing the On-Screen Menu Language ...................41
Setting the Time and Local Settings ...............................41
Using the Parental Controls ............................................42
Accessing the Parental Controls Menu ..........................42
Enabling or Disabling Program Ratings .......................... 42
Locking and Unlocking Channels ..................................42
Blocking and Unblocking Content by Rating .................43
1
Changing the Parental Control Passcode .....................43
Resetting the Content Locks ........................................... 43
Setting up View Mode.....................................................44
Changing the Wide Setting ............................................44
Adjusting the CEC Settings .............................................45
Turning the Power Indicator On or Off ............................45
Using the Reset & Admin Menu ....................46
Restoring the TV to Factory Default Settings ...................46
Using the Guided Setup Menu .....................46
Using the Info Window ...........................47
Using the USB Media Player ............................48
Using the USB Media Player .......................48
Preparing your USB Drive to Play USB Media ..................48
Playing USB Media ..........................................................48
Removing the USB Drive from the TV ...............................48
Specifications ..................................................53
Limited Warranty ..............................................55
Legal & Compliance ....................................... 56
FCC Class B Radio Interference Statement ....................56
Notice ..............................................................................56
FCC Warning ...................................................................56
2

Installing the TV

1

INSPECTING THE PACKAGE CONTENTS

Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged.
VIZIO LED HDTV
Remote control
with batteries

INSTALLING THE TV

After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways:
• On a flat surface, using the included stand
• On a wall, using a VESA-standard wall mount (not included)

Installing the TV Stand

Your TV includes a stand designed to support the weight of the TV and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly secured.
TV stands
Power cord
Quick Start Guide
4 x T3 30mm
Phillips screws
PACKAGE CONTENTS
TV ON STANDS
3
INSTALLING THE STAND
1
It is recommended that two people take part in the stand installation.
Remove any plastic wrapping from the TV and the stand.
Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a
blanket and avoid any sharp edges.
4
INSTALLING THE STAND
1
Insert the left and right stands into the base of the TV.
Insert two (2) T3 30 mm Phillips screws (included) into the back of the TV
and tighten them using a Phillips screwdriver, to secure each stand to the TV.
When you are finished, place the TV on a stable, level surface.
5

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model:
Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.
D39h-C0
Screw Size: M4
Hole Pattern: 100 mm (V) x 100 mm (H)
1
Weight w/o
Stand:
Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the weight/load of this TV.
For some wall mounts, you may want to use cables with right-angle connectors. This allows the TV to rest closer to the wall.
13.45 lbs
WALL MOUNT SCREW LOCATIONS
6

Controls and Connections

2
USB - Connect USB thumb drive to play photo, music, or video.
HDMI - Connect HDMI device.
Optical Audio Out - Connect optical/SPDIF audio device, such as
home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as sound bar.
Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Component/Composite - Connect component or composite device.
HDMI - Connect HDMI device.
AC POWER - Connect AC power cord.

BACK PANEL

7
Controls and Connections
2
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
Power - Press once to turn on the TV.
Press and hold to turn off the TV
Input - Press once to access the INPUT menu.

SIDE PANEL

8

FRONT PANEL

2
REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see
Off
on page 45
.
Turning the Power Indicator On or
9
FRONT PANEL
USING THE REMOTE
2
INPUT
Change the currently-displayed input.
A/V CONTROLS
Control USB media player.
CLOSED CAPTIONS
Open the closed caption menu.
EXIT
Close the on-screen menu.
OK
Select the highlighted menu option.
BACK
Go to the previous on-screen menu.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
MUTE
Turn the audio off or on.
NUMBER PAD
Manually enter a channel.
WIDE
Switch the display mode.
POWER
Turn the TV on or off.
INFO Display the info window.
MENU
Display the on-screen menu.
ARROW Navigate the on-screen menu.
GUIDE
Display the info window.
V BUTTON
Open the USB media player.
CHANNEL UP/DOWN
Change the channel.
LAST Return to the channel last viewed.
DASH
Use with number pad to manually enter a digital sub-channel. (For example, 18-4 or 18-5.)
10
REMOTE CONTROL

Replacing the Batteries

2
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.
3. Replace the battery cover.
11

Connecting Your Devices

CONNECTING A DEVICE

Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.).
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and the device.
3
Cable/Satellite Box
4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).
DVD/Blu-ray Player
HDMI CABLE
BEST
COMPONENT CABLE
BETTER
COAXIAL CABLE
BETTER
Game Console
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
• ANALOG
• HD VIDEO (1080p)*
• STEREO AUDIO
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
12
AV CABLE
GOOD
* Maximum resolution
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO

CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES

3
AV CABLE
AV cables (or composite cables) are the traditional way of connecting your devices to your TV. Video signals are sent over the yellow connector while audio is sent over the red and white connectors.
• Video Resolutions up to 480i
• Analog Connection
• Audio and Video Signals
Y/V L R
COAXIAL CABLE
Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector.
• HD Video Resolutions up to 1080i
• Analog Connection
• Audio and Video Signals
Coaxial
GOOD BETTER
13
3
COMPONENT VIDEO
COMPONENT CABLE
Component cables are designed to carry high definition video signals along with additional audio connections. Colors are delivered with color information split up three different ways over three connectors for video (separated into red, blue and green signals) and the left and right audio connectors (red and white).
• HD Video Resolutions up to 1080p
• Analog Connection
• Audio and Video Signals
R L Pr/Cr Pb/Cb Y/V
HDMI CABLE
HDMI is the intelligent, all-digital interface that delivers both dazzling quality and unmatched ease of use. HDMI technology transmits crystal-clear digital video along with multi-channel surround audio. HDMI-connected devices have the ability to automatically adjust themselves for optimal viewing.
• HD Video Resolutions up to 1080p
• HD Audio
• Digital Connection
• Audio and Video Signals
HDMI
BETTER
BEST
14

CONNECTING AN AUDIO DEVICE

Your TV can output sound to an audio device, such as a receiver or sound bar.
1. Verify that your device has an audio port that matches an available port on the TV (optical, RCA, etc.).
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and the device.
3
Home Audio Receiver
4. Turn the TV and your device on.
VIZIO Sound Bar
HDMI CABLE
BEST
OPTICAL/SPDIF CABLE
BETTER
RCA CABLE
• CEC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
GOOD
15
COMPONENT VIDEO

CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES

3
RCA CABLE
AV cables (or composite cables) are the traditional way of connecting your devices to your audio device. Audio signals are sent over the red and white connectors.
• Quality Stereo Connection
• 2.0 Channel
• Analog Connection
• Audio Signal Only
L R
OPTICAL/SPDIF CABLE
Optical/SPDIF cables transmit audio signals as pulses of light through a cable made of plastic fibers. Audio signals are digitally transmitted between devices.
• PCM Stream (Lossless)
• Dolby Digital 5.1 Channel
• Digital Connection
• Audio Signal Only
Optical/SPDIF HDMI
HDMI CABLE
HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channel-enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See
Audio Device - ARC
• CEC 2-way Communication (Auto setup)
• PCM, DTS, Dolby Digital
• 2.0-5.1 Scaleable Lossless Digital Audio Connection
• Audio and Video Signals
on page 17.
Connecting an
GOOD BETTER
BEST
16

CONNECTING AN AUDIO DEVICE - ARC

Without HDMI ARC With HDMI ARC
3
Without an HDMI ARC setup, your TV will transmit audio signals from the built-in tuner and VIA apps to your home audio receiver through a separate audio connection.
RCA (Audio)
Your Home Audio Receiver
Built-in Tuner
Your TV
HDMI
Built-in Tuner
Your TV
HDMI
Your Home Audio Receiver
With an HDMI ARC setup, the audio connection between your TV and home audio receiver can be removed. The HDMI cable will transmit audio signal to and from your TV with an all-digital audio/video connection.
HDMI
Your Blu-ray Player
HDMI
Your Blu-ray Player
17
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
Store Demo Home Use

Completing the First-Time Setup

Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
Store Demo Home Use
4
The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the wireless password ready.
• If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV powers on and the Setup App starts.
4. Use the Arrow buttons on the
remote to highlight your TV source and press OK.
5. If you have cable TV, select whether you have a cable box or if you connect the TV directly to a cable from the wall.
Use the Arrow and OK buttons on the remote to select the input your TV source is connected to.
2. Use the Arrow buttons on the remote to highlight Home Use and press OK.
3. Use the Arrow buttons on the remote to highlight your preferred language, and then press the OK button.
6. When you are finished, the message “Your VIZIO TV is set up” will appear.
The First-Time Setup is complete.
18

Using the On-Screen Menu

Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
5
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the remote.
From this menu, you can:
• Adjust the Picture settings
• Adjust the Audio settings
• Set the Sleep Timer
• Adjust the Channel settings
• Set up Closed Captioning
• Select input devices
• Adjust TV settings
• Access the Guided Setup
VIZIO
TV SETTINGS
Picture
Audio
Timers
Channels
CC
Closed Captions
Devices
System
Guided Setup

NAVIGATING THE ON-SCREEN MENU

To open the on-screen menu, press the MENU button on the remote.
Use the Arrow buttons to highlight a menu option, and press the OK button to select that option.
While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen. The EXIT button will close the on-screen menu.
19
5

CHANGING THE INPUT SOURCE

External devices such as DVD players, Blu-ray Players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the Input menu.
To change the input source:
1. Press the INPUT button on
the remote. The Input menu is displayed.
2. Use the Up/Down Arrow buttons or the INPUT button on the remote to highlight the input you wish to view and press OK. The selected input is displayed.
Input Name
You can change the input names that appear on the Input menu to make your devices easy to recognize. See
Renaming Devices on the Input Menu
39 for more information.
TV
HDMI-1
HDMI-2
COMP
on page

CHANGING THE SCREEN ASPECT RATIO

The TV can display images in five different modes: Normal, Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently.
To change the screen aspect ratio:
1. Press the WIDE button on the
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you wish to view and press OK.
• Normal preserves the content’s
original aspect ratio. Since the 4:3 aspect ratio is not large enough to fill the TV’s screen, black bars are added to the left and right of the display image.
• Stretch expands the display image to fill the screen.
Images may appear wider than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will still appear on the top and bottom of the display image. This option is only available when the TV is
displaying a 720p/1080i source.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will still appear on the top and bottom of the display image. This option is only available when the TV is
displaying a 480i/480p source.
Normal
Panoramic
Wide
Zoom
Note: Aspect ratio settings may vary by Input source.
Normal
Stretch
Wide
Zoom
20
• Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the display image may appear distorted. If the program is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and bottom of the display image.
• Zoom expands images with black bars to fit the screen.

VIEWING VIDEO WITH THE MENU OPEN

Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
5
When the on-screen menu opens, it covers the left-hand portion of the picture. The picture can be displayed in three different ways:
• Full-sized and centered on the screen - The left-hand
portion of the picture covered by the menu.
• Resized to fit - The entire picture is visible in the space to
the right of the menu.
• Full-sized and aligned to the right edge of the menu -
The picture extends off of the right side of the screen.
To change the position of the picture while the on-screen menu is displayed:
1. Use the Arrow buttons on the remote to highlight
Resize
Video.
2. Press OK to cycle through the three display methods.
3. Press the Up Arrow button on the remote to the menu.
VIZIO
PICTURE
Picture Mode Standard
Backlight 85
Brightness 50
Contrast 50
Color 59
Tint 0
Sharpness 9
More Picture
Picture Mode Edit
Color Calibration
Select from preset picture modes. Standard picture mode meets ENERGY STAR requirements. For the best picture, use Calibrated mode. To reduce video delay (lag) when gaming, use Game mode.
-
-
-
-
-
-
+
+
+
+
+
+
®
21
VIZIO
PICTURE
Picture Mode Standard
Auto Brightness Control
Backlight 85
Brightness 50
Contrast 50
Color 59
Tint 0
Sharpness 9
More Picture
Picture Mode Edit - PicModename
Color Calibration
Select from preset picture modes. Standard picture mode meets ENERGY STAR requirements. For the best picture, use Calibrated mode. To reduce video delay (lag) when gaming, use Game mode.
+
-
+
-
+
-
+
-
+
-
+
-
®
FULL-SIZED AND CENTERED
VIZIO
PICTURE
Picture Mode Standard
Auto Brightness Control
Backlight 85
Brightness 50
Contrast 50
Color 59
Tint 0
Sharpness 9
More Picture
Picture Mode Edit - PicModeName
Color Calibration
Select from preset picture modes. Standard picture mode meets ENERGY STAR requirements. For the best picture, use Calibrated mode. To reduce video delay (lag) when gaming, use Game mode.
VIZIO
PICTURE
Picture Mode Standard
Auto Brightness Control
Backlight 85
Brightness 50
Contrast 50
Color 59
Tint 0
Sharpness 9
More Picture
Picture Mode Edit - PicModeName
Color Calibration
Select from preset picture modes. Standard picture mode meets ENERGY STAR requirements. For the best picture, use Calibrated mode. To reduce video delay (lag) when gaming, use Game mode.
+
-
+
-
+
-
+
-
+
-
+
-
®
+
-
+
-
+
-
+
-
+
-
+
-
®
FULL-SIZED AND ALIGNED
RE-SIZED TO FIT
TO RIGHT OF MENU
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

ADJUSTING THE PICTURE SETTINGS

Your TV display can be adjusted to suit your preferences and viewing conditions.
When changes are made while a preset picture mode is selected, an asterisk appears after the name of the picture mode. These settings can be saved as a new custom picture mode and the preset mode can be reset to its default settings.
Custom Picture Mode on page 28).
To adjust the picture settings:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight Picture and press OK. The PICTURE menu is displayed.
3. Use the Arrow buttons on the remote to highlight Picture
Mode, then use the Left/Right Arrow buttons to change the
picture mode:
• Standard sets the various
picture settings to values that meet ENERGY STAR
• Calibrated sets the picture
®
requirements.
settings to values perfect for watching TV in a brightly-lit room.
• Calibrated Dark sets the picture settings to values
perfect for watching TV in a dark room.
(see Creating a
VIZIO
PICTURE
Picture Mode Standard
Backlight 85
Brightness 50
Contrast 50
Color 59
Tint 0
Sharpness 9
More Picture
Picture Mode Edit
Color Calibration
Select from preset picture modes. Standard picture mode meets ENERGY STAR requirements. For the best picture, use Calibrated mode. To reduce video delay (lag) when gaming, use Game mode.
-
-
-
-
-
-
+
+
+
+
+
+
®
brighter, more vivid picture.
• Game reduces throughput delays and optimizes the
picture settings for displaying game console output.
• Computer optimizes the picture settings for displaying
computer output.
4. To manually change each of the picture settings, use the
Up/Down Arrow buttons on the remote to highlight that picture setting, then use the Left/Right Arrow buttons to adjust the setting:
• Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted when starting from some picture modes.
• Brightness - Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.
• Contrast - Adjusts the white level of the picture. When
this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.
• Color - Adjusts the intensity of the picture colors.
• Tint - Adjusts the hue of the picture. This setting is useful
in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.
• Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist.
5. When you have finished adjusting the picture settings, press
BACK to adjust additional settings or EXIT.
• Vivid sets the picture settings to values that produce a
22
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

Adjusting the More Picture Settings

To adjust the More Picture settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
More Picture, and then press OK. The MORE PICTURE menu is
displayed.
2. Use the Arrow buttons to highlight the setting you wish to adjust, then press the Left/ Right Arrow buttons to change the setting:
• Color Temperature -
Adjusts the 'warmness' and 'coolness' of the white areas of the picture. Select Cool,
Normal, or Computer.
• Cool produces a
blue-hued picture.
• Normal is optimized for
television viewing.
VIZIO
MORE PICTURE
Color Temperature Cool
Black Detail Medium
Backlight Control
Reduce Signal Noise Low
Reduce Block Noise Low
Game Low Latency
Picture Size & Position
Film Mode Auto
Gamma
for mpeg files. Select Off, Low, Medium, or High.
• Game Low Latency - Reduces video delay (lag) when gaming. Select Off, or On. This option is not available for devices connected using a coaxial cable.
• Picture Size & Position - Picture Size increases or decreases the vertical and horizontal size of the displayed picture. Picture Position adjusts the vertical and horizontal positions of the picture to ensure the image is centered and completely fills the screen. Use the Left/Right Arrow buttons to adjust the horizontal position of the displayed picture. Use the Up/Down Arrow buttons to adjust the vertical position of the displayed picture. Press the OK button when you are finished.
• Film Mode - Optimizes the picture for watching film. Select Auto or Off.
• Gamma - Sets the shape of the gamma curve. Use lower values for bright room conditions and higher values when it is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
3. When you have finished adjusting the More Picture settings,
press BACK to adjust additional settings or EXIT.
• Computer optimizes the
picture for use as a PC monitor.
• Black Detail - Adjusts the average brightness of the
picture to compensate for large areas of brightness. Select Off, Low, Medium, or High.
• Backlight Control - Dynamically improves the contrast ration of the picture by adusting the backlight. Select Off or On.
• Reduce Signal Noise - Reduces background picture noise when viewing analog sources. The function helps to correct "speckle" noise with a slight reduction in sharpness.
Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
23

Adjusting the Picture Mode Edit Settings

VIZIO
Input CC
ABC
Wide
Normal
PanoramicWide Zoom
2D 3DExit
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use
the Arrow buttons to highlight
More Picture > Picture Mode Edit, and then press the OK
button. The PICTURE MODE EDIT menu is displayed.
Save Picture Mode
Lock Picture Mode
Reset Picture Mode
2. Use the Arrow buttons to
highlight the setting you wish to adjust, then press the Left/ Right Arrow buttons to change the setting:
• Save Picture Mode - Saves the settings for a custom picture mode.
• Lock Picture Mode - Prevent/
allow changes to the currently selected custom picture mode. Select On or
Off.
5
PICTURE MODE EDIT
• Reset Picture Mode
- Resets
the picture mode settings to factory default values.
3. When you have finished adjusting the Picture Mode Edit
settings, press BACK to adjust additional settings or EXIT.
24
5
VIZIO
Input CC
ABC
Wide
Normal
PanoramicWide Zoom
2D 3DExit

Adjusting the Color Calibration Settings

Color Calibration Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings.
The Color Tuner, 11 Point White Balance, and test patterns allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter.
To adjust the color calibra picture settings:
1. From the PICTURE menu,
use the Arrow buttons to highlight Color Calibration and press the OK button. The COLOR CALIBRATION menu is displayed.
COLOR CALIBRATION
Picture Mode*
Color Temperature*
Color Tuner
Reset Color Temperature
2. Use the Arrow buttons to
highlight the setting you wish to adjust, then press the OK button to change the setting:
• Picture Mode - Not directly selectable (reference only). Changes to Hue, Saturation, and Brightness are saved here and indicated with an asterisk (*).
• Color Temperature - Not directly selectable (reference only). Changes to Offset and Gain are saved here and indicated with an asterisk (*).
• Color Tuner - Adjust the HSB color, RGB offsets, and 11-point white balance, and display calibration test patterns.
• Reset Color Tuner/Temperature - Prevent/allow changes to the currently selected custom picture mode.

Adjusting the Color Tuner Settings

The Color Tuner settings allow you to adjust the Hue, Saturation, and Brightness (HSB) color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns.
To adjust the HSB color settings:
1. From the PICTURE menu, use the Arrow buttons to highlight Color Calibration and press the OK button. The COLOR CALIBRATION menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and press the OK button. The Color Tuner menu is displayed.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
3. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, (these 3 adjust the color) Offset, or Gain (these two adjust the color temperature) of the color
you wish to adjust. Press the OK button.
4. Use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK button to save the setting.
5. When you have finished adjusting the Color Tuner settings, press the BACK button to adjust additional settings or EXIT.
Changes to Hue, Saturation, and Brightness are indicated with an asterisk (*) on the Picture Mode setting.
Changes to Offset and Gain are indicated with an asterisk (*). on the Color Temperature setting.
25
5
To turn color channels off and on:
1. From the PICTURE menu, use the Arrow buttons to highlight Color Calibration and press the OK button. The COLOR CALIBRATION menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and then press the OK button. The Color Tuner menu is displayed ..
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
3. Use the Arrow buttons on the remote to highlight Red, Green, or Blue.
4. Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off.
5. Use the Arrow buttons to highlight another color channel to turn off or on. Only two color channels can be turned off at the same time.
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 Point White Balance menu is displayed.
11 Point White Balance
Gain Red Green Blue
5% 0 0 0
2. Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust. Press the OK button and use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK button to save the setting.
3. When you are finished, press the BACK button to adjust additional settings or EXIT.
All changes here are saved to Color Temperature.
6. When you are finished with the color channels, press the
BACK button to adjust additional settings or EXIT.
26
5
To show or hide the Color Bar Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the SMPTE Test Pattern menu is displayed.
SMPTE Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the Color Bar.
—or—
To hide the Color Bar Test Pattern, use the Left/Right Arrow buttons to highlight Off.
3. When you are finished, press the BACK button to adjust additional settings or EXIT.
To show or hide the Flat Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Flat Test Pattern menu is displayed.
Flat Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to select the percentage
brightness for the flat test pattern. Selecting a percentage immediately shows the flat pattern at that brightness.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow buttons to highlight Off.
3. When you are finished, press the BACK button to adjust additional settings or EXIT.
27
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
To show or hide the Ramp Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Ramp Test Pattern menu is displayed.
Ramp Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to select the color for the ramp test pattern. Selecting a color immediately shows that color ramp.
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow buttons to highlight Off.
3. When you are finished, press the BACK button to adjust additional settings or EXIT.

Creating a Custom Picture Mode

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
When changes are made while a preset picture mode is selected, an asterisk appears after the name of the picture mode. These settings can be saved as a new custom picture mode and the preset mode can be reset to its default settings.
A custom picture mode only applies to the input (HDMI-1, HDMI-2, COMP, AV, etc.) in use when it was created. Each input can have up to six custom picture modes.
To create a custom picture mode:
1. Set the Picture Mode to an existing custom setting. See
Adjusting the Picture Settings
VIZIO
SAVE PICTURE MODE
on page 22.
<type custom name>
2. From the PICTURE menu, use the Arrow buttons to highlight
Picture Mode Edit and press OK. The PICTURE MODE EDIT
menu is displayed.
a b c d e f g h i j k l m n o p q r s t u v w x y z 0
1 2 3 4 5 6 7 8 9
.@# .com Space
3. On the PICTURE MODE EDIT menu, select Save Picture
Done
Mode. The SAVE PICTURE MODE menu is displayed.
4. Use the Arrow buttons to enter a custom name using the on-screen keyboard.
5. Highlight Done and press OK.
6. Press the EXIT button to exit the menu screens.
28
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

Locking and Unlocking the Custom Picture Modes

Custom picture modes can be locked with a unique PIN to prevent accidental changes to their settings.
To lock all custom picture modes:
1. From the PICTURE menu, use
the Arrow buttons to highlight Picture Mode Edit and select Lock or Unlock Picture Mode, then press OK. The
VIZIO
LOCK PICTURE MODE
Create a picture control PIN to prevent change to all custom picture modes.
LOCK PICTURE MODE menu is displayed.
2. Use the Number Pad on your
remote to enter a unique
Save
4-digit PIN.
3. Highlight Save and then press the OK button.
4. Press the EXIT button to exit the
Create a 4 digit passcode using the num­ber keys on the remote.
menu screens.

Deleting a Custom Picture Mode

Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode become assigned to the
Calibrated
picture mode.
To delete a custom picture mode:
1. From the PICTURE menu, use
the Arrow buttons to highlight
To delete the user created Custom 1 picture mode,
select the Delete button.
Picture Mode Edit and select Lock or Unlock Picture Mode,
Delete Cancel
then press OK. The DELETE PICTURE MODE window is displayed.
2. Use the Left/Right Arrow buttons to highlight Delete and press OK.
3. Press the BACK button to adjust additional settings or EXIT.
To unlock all custom picture modes:
5. From the PICTURE menu, use
the Arrow buttons to highlight Picture Mode Edit and select Lock or Unlock Picture Mode, then press OK. The LOCK PICTURE MODE menu is displayed.
6. Use the Number Pad on your remote to enter your 4-digit PIN.
7. Make any desired changes to the picture modes.
8. To relock picture modes, you must create a new 4-digit PIN.
29
5
VIZIO
Input CC
ABC
Wide
Normal
PanoramicWide Zoom
2D 3DExit

ADJUSTING THE AUDIO SETTINGS

To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow buttons to change the setting:
• TV Speakers - Turns the
built-in speakers on or off.
When the TV speakers are set to On, DTS signals cannot be passed through digital audio outputs.
TV Speakers On
Surround Sound On
Balance 0
Lip Sync 0
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer
Delete Audio Mode
AUDIO
• Analog Audio Out - Sets the volume control properties
for the 3.5mm (headphone jack) connector when connected to a home theater audio system. Select Variable to control the headphones’ volume from the TV’s volume controls, or select Fixed to control the headphones’ volume from your home theater system controls. (Some external speakers can also be connected to the 3.5mm connector.)
-
-
+
+
• Equalizer - Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
Changing the Equalizer Settings
on page 31.
• Delete Audio Mode - Deletes a custom audio mode
created using the Equalizer Settings. See
Custom Audio Mode on page 31
.
Deleting the
This option is cannot be selected if no custom audio mode has been created.
4. When you have finished adjusting the audio settings, press
the BAC K button to adjust additional settings or EXIT.
• Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from the TV’s internal speakers. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp details and clear, intelligible dialog. Select On or Off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
Digital Audio Out - Changes the type of processing for
You must select Bitstream for audio with more than
HDMI ARC or optical output when connected to a home
two channels (3.0, 5.0, or 5.1, for example).
theater audio system. Select PCM or Bitstream.
30
5

Changing the Equalizer Settings

The graphic equalizer has several pre-set modes and allows you to create one custom mode.
To select a pre-set audio mode:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK. The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select an audio mode (Flat, Dynamic, Center, Bass Boost, or Bright). The equalizer bars change to reflect the mode.
5. Press the BACK button to adjust additional settings or EXIT.
To create, modify, or replace the single custom equalizer setting:
1. Press the MENU button on the remote. The on-screen menu is displayed.

Deleting the Custom Audio Mode

To delete the custom audio mode that has been created:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Delete Audio Mode and press OK. The TV displays, “To delete the user created custom audio mode, select the Delete button.”
4. Highlight Delete and press OK.
5. Press the BACK button to adjust additional settings or EXIT.
2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK. The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select any audio mode as a starting point.
5. Use the Arrow buttons to highlight a frequency and then press OK.
6. Use the Up and Down Arrow buttons to adjust the boost (up) and attenuation (down) for the frequency.
7. Use the Left and Right Arrow buttons to select another frequency, if desired, and adjust it.
8. Press the BACK button to adjust additional settings or EXIT.
31
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

SETTING TIMERS

This TV has several timers to save energy and to turn off when you go to sleep.

Setting the Sleep Timer

When activated, the TV’s sleep timer will turn the TV off after a set period of time.
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight Timers and press OK. The TIMERS menu is displayed.
3. Use the Left/Right Arrow buttons on the remote to highlight the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don’t want the sleep timer to activate, change the setting to Off.
VIZIO
TIMERS
Sleep Timer Off
Auto Power Off 10 minutes

Setting the Auto Power Off Feature

To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated.
To set the Auto Power Off feature:
1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off.
2. Use the Left/Right Arrow buttons on the remote to change whether the TV will turn off. If you don’t want the TV to turn off when there is no signal, change the setting to Off or 10 minutes.
3. When you have finished setting the auto power off time, press the BACK button to adjust additional settings or EXIT.
4. When you have finished setting the sleep timer, press the BACK button to adjust additional settings or EXIT.
32
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
VIZIO
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Input CC
ABC
Wide
Normal
PanoramicWide Zoom
2D 3DExit

SETTING UP CHANNELS

You can use the TV’s Channels menu to:
• Select a Channel Source
• Find channels
• Perform a partial channel scan
• Manually add channels
• Select channels to skip
• Select language for analog
and digital channels
VIZIO
CHANNELS
Channel Source Antenna
Find Channels
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio Stereo
Digital Language English

Selecting a Channel Source

1. On the remote control, press Input and use the Arrow button to highlight TV (antenna icon), then press OK.
2. Press the MENU button, select Channels and press OK. Th e CHANNELS menu is displayed.
3. On the CHANNELS menu, highlight Channel Source and using the left/right Arrow buttons to select either Antenna or
Cable.

Finding Channels

The TV may need to scan for channels before it can display programs and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels from an out-of-the-wall connection (without a cable box). Moving the TV to an area with different channels requires the TV to scan for channels again.
To perform an Auto Channel Scan:
1. From the CHANNELS menu, highlight Find Channels and press OK. The auto channel scan begins.
2. Wait until the channel scan is 100% complete. Highlight Done and press OK.
VIZIO
FIND CHANNELS
Channels Found
Digital: 0
Analog: 19
18% Complete
Cancel
3. Press the EXIT button on the remote.
If the channel scan is cancelled, the channels that were already discovered are retained. A new channel scan will clear all channels.
Cancel the channel scan.
33
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

Adding New Channels

Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Scan and Add Analog Channel options. This is quicker than scanning all possible channels.
To add a range of new channels:
1. From the CHANNELS menu, highlight Partial Channel Search, and press OK. The PARTIAL CHANNEL SEARCH menu is displayed.
2. Highlight Scan Mode and select the type of channel you are adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and type the channel where you want to begin the scan. (Use the left Arrow button to backspace. Use the Number Pad on the remote to type the channel.)
4. Highlight To Channel and enter the channel where you want to end the scan. (Use the left Arrow button to backspace. Use the Number Pad on the remote to enter the channel.)
To add a single new analog channel:
1. From the CHANNELS menu,
highlight Add Analog Channel and press OK. The ADD ANALOG CHANNEL menu is displayed.
2. Highlight Enter Channel # and use the Number Pad on the remote to type the number of the channel to be added.
3. Highlight Add Channel and press OK. The TV scans for the channel.
4. When the TV is done scanning for the channel, press the EXIT button on the remote.
VIZIO
ADD ANALOG CHANNEL
Enter Channel #
Add Channel
5. Highlight Start and press OK. The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
34

Skipping Channels

Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls. See
Channels on page 42
Locking and Unlocking
.
To remove a channel:
1. From the CHANNELS menu,
highlight Skip Channel, and press OK. The SKIP CHANNEL menu is displayed.
2. For each channel you wish
to remove, use the Up/Down Arrow buttons on the remote to highlight the channel and
press OK. A
P appears to the
VIZIO
1
1
1-2
2
2-2
2-3
SKIP CHANNEL
Test 0
Test 1
Test 2
Test 3
Test 4
Test 5
P
P
P
right of each channel you select.
3. When you have selected all of the channels you wish to remove, press BACK to adjust additional settings or EXIT.
5
35
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

LISTENING TO ALTERNATE AUDIO

Changing the Analog Audio Language

Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP).
Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming.
To use the Analog Audio feature:
1. From the CHANNELS menu, highlight Analog Audio and press OK. The ANALOG AUDIO menu is displayed.
2. Select Stereo, SAP (secondary audio programming), or Mono. Press OK.
VIZIO
ANALOG AUDIO
Stereo
SAP
Mono

Changing the Digital Audio Language

Some digital over-the-air (free), cable, and satellite channels broadcast programs in more than one language. The TV’s Digital Audio feature allows you to listen to audio in alternate languages.
Not all programs are broadcast in alternate languages. The Digital Audio Language feature only works when the program being viewed is being broadcast in the language you select.
1. From the CHANNELS menu,
highlight Digital Language and press OK. The DIGITAL LANGUAGE menu is displayed.
2. Select your preferred language:
VIZIO
DIGITAL LANGUAGE
English
Español
Français
English, Français, or Español and press OK.
3. Press BACK to adjust additional settings or EXIT.
3. Press BACK to adjust additional settings or EXIT.
36
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

SETTING UP CLOSED CAPTIONING

Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue.
If the program you are viewing is not being broadcast with closed captions, the TV will not display them.
The Closed Captions menu does not appear when an HDMI input is selected.
To activate or deactivate closed captions:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight Closed Captions and press OK. The CLOSED CAPTIONS menu is displayed.
3. Use the Arrow buttons on the remote to highlight Closed
Captions and then use the Left/Right Arrow buttons to
select On or Off.
4. Use the Arrow buttons on the remote to highlight either
Analog or Digital Closed Captions.
5. Use the Left/Right Arrow buttons on the remote to select the caption channel you wish to display, then press BACK to adjust additional settings or EXIT.
VIZIO
CLOSED CAPTIONS
Closed Captions Off
Analog Closed Captions CC1
Digital Closed Captions CS1
Digital Style

Changing the Appearance of Digital Closed Captions

Digital closed captions can be displayed according to your preference. See the diagram on the next page for an explanation of the parts of the closed caption area.
To change the appearance of digital closed captions:
1. From the CLOSED CAPTIONS
menu, use the Arrow buttons to highlight Digital Style and press OK.
2. Use the Left/Right Arrow
buttons on the remote to select Custom and press OK. The DIGITAL STYLE menu is displayed.
3. Use the Up/Down Arrow
buttons on the remote to highlight the setting you wish to change, then use the Left/
VIZIO
DIGITAL STYLE
Caption Style
Text Style
Text Size
Text Color
Text Opacity
Text Edges
Text Edges Color
Background Color
Background Opacity
Window Color
Window Opacity
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
Right Arrow buttons to change the setting:
• Caption Style - Choose As Broadcast to keep
default settings or Custom
Select As Braodcase to display digital captions as sent by the caption provider. The color and size for the caption text and background can still be customized.
to manually change each setting.
• Text Style - Change the font used for the closed captioning text.
• Text Size - Make the text larger or smaller.
• Text Color - Change the color of the text.
• Text Opacity - Change the transparency of the text.
• Text Edges - Change the effects at the edges of the text,
such as raising the edges or adding drop shadows.
37
Custom
Large
Green
Black
Red
5
• Text Edges Color - Change the color of the text edge
effects.
• Background Color - Change the color of the
background directly behind the text.
• Background Opacity - Change the transparency of the
background directly behind the text.
• Window Color - Change the color of the closed
captioning box.
• Window Opacity - Change the transparency of the
closed captioning box.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
Text
Typical choices include:
• Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode.
• Opaque background and window in the same color— When text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the background is black, and the window is red.
Background
CLOSED CAPTION TEXT SAMPLE
38
Window
CLOSED CAPTIONS SCREEN LAYOUT

RENAMING DEVICES ON THE INPUT MENU

Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
Inputs can be renamed to make them easier to recognize on the Input menu (see
Changing the Input Source
example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.”
on page 20). For
5
Input Port
To change the name of an input:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Devices and press the OK button. The DEVICES menu is displayed.
3. Highlight the input port that you want to name and press OK.
4. To use a preset input name:
a. Highlight the Input Port row and press OK.
b. Highlight the input name you want to use (HDMI-1,
Blu-ray, Cable Box, Computer, DVD, DVR, Game, or Satellite) and press OK.
—or—
To enter a custom name:
a. Enter your custom name using the on-screen keyboard.
b. Highlight OK and press OK.
VIZIO
NAME INPUT
HDMI-1 DVD
DVD_
a b c d e f g h i j k l m n o p q r s t u v w x y z 0
1 2 3 4 5 6 7 8 9
.@# .com Space
OK
Cancel
Select the input name from a list of common device names (Blu-ray, Cable Box, DVD, etc).
Input Name
Custom Name
c. The Input Name changes to show the custom name that
you created.
5. When you have finished naming your input, press the BACK button to adjust additional settings or EXIT.
39
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

CHANGING THE TV SETTINGS

Using the System menu, you can:
• View system information
• Change the on-screen
menu language
• Set the time zone and local
settings
• Set up parental controls
• Select a view mode
• Change the Wide settings
• Adjust the California Energy
Commission (CEC) settings
• Adjust when the power
indicator is illuminated
• Reset the TV settings and set
up administrative controls
VIZIO
SYSTEM
System Information
Menu Language English
Time & Local Settings
Parental Controls
View Mode
Wide
CEC
Power Indicator Off
Reset & Admin
View status information for the TV, remote, current input and your network.

Viewing System Information

To view a summary of the TV settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Highlight System Information and press OK.
4. Use the Up/Down Arrow buttons to scroll through the system information.
System information is used verify settings and the firmware version.
5. When you are finished reviewing the system information, press the BACK button to view or change additional settings or EXIT.
40
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
VIZIO
Input CC
ABC
Wide
Normal
PanoramicWide Zoom
2D 3DExit

Changing the On-Screen Menu Language

Your TV can display the on-screen menu in different languages.
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight System and
VIZIO
MENU LANGUAGE
English
Español
Français
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight Menu Language and press OK. The MENU LANGUAGE menu is displayed.
4. Highlight your preferred language (English, Español, or Français) and press OK. All screens will now be displayed in the selected language.
5. Press the BACK button to change additional settings or EXIT.

Setting the Time and Local Settings

To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone:
1. Press the MENU button on the
remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight Time & Local Settings and press OK. The menu headed by the local date and time is displayed.
TIME ZONE
Alaska
Hawaii
Pacific
Mountain
Central
Eastern
Atlantic
Newfoundland
Indiana
Arizona
4. Highlight Time Zone and press OK. The TIME ZONE menu is displayed.
5. Highlight your time zone and press OK.
6. Highlight Daylight Saving Time and press OK. The DAYLIGHT SAVING TIME menu is displayed. Choose On if your locale observes daylight savings time, Off if it does not, or Auto to have your TV detect daylight savings automatically.
7. Press the BACK button to change additional settings or EXIT.
41
5

Using the Parental Controls

The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password.
The Parental Controls menu only appears when:
• You are using the tuner to receive your TV signals, such as when you are using an antenna for Over-the-Air signals or when connected to cable TV directly from the wall (no cable box).
• You have a device connected using a composite video cable or a coaxial cable, such as a VCR, satellite or cable box, or DVR.

Accessing the Parental Controls Menu

To access the Parental Controls menu:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.

Enabling or Disabling Program Ratings

To manage program content according to its rating, you must enable the Program Rating feature.
To enable or disable the Program Rating feature:
From the PARENTAL CONTROLS menu, highlight Locks and use the left/right Arrow buttons to select On (enable) or Off (disable).

Locking and Unlocking Channels

When a channel is locked, it will be inaccessible. Locking a channel is a good way to prevent children from viewing inappropriate material.
To lock or unlock a channel:
1. From the PARENTAL CONTROLS menu, highlight Channel Locks and press OK. The CHANNEL LOCKS menu is displayed.
2. Highlight the channel you want to lock or unlock and press OK.
3. When a channel is locked, the Lock icon appears locked. The channel is not accessible unless the parental passcode is entered.
4. Enter your parental passcode. If you have not set a
passcode, enter the default, 0000. The PARENTAL CONTROLS menu is displayed.
To set a custom parental passcode, see
the Parental Control Passcode
on page 43.
Changing
4. When a channel is unlocked, the Lock icon appears unlocked. The channel is accessible.
42
5

Blocking and Unblocking Content by Rating

A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed.
When this is the case, you can use the TV’s Rating Block feature to block content based on its rating.
For a list of content ratings and their definitions, visit www.tvguidelines.org.
To block or unblock content by its rating:
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
USA TV - USA television program broadcasts. USA MOVIE - USA movie broadcasts. Canadian English - Canadian English television program
broadcasts. Canadian French - Canadian French television program
broadcasts.
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to highlight the rating type and press OK.

Changing the Parental Control Passcode

If you use the parental controls, you should change the passcode to prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN and press OK. The CHANGE PIN menu is displayed.
2. In the New PIN field, use the Number Pad on the remote to enter your new 4-digit parental control passcode.
3. In the Confirm PIN field, use the Number Pad on the remote to re-enter your new 4-digit parental control passcode.
4. Write down your new parental control passcode and save it in a secure location.
5. Press the EXIT button on the remote.

Resetting the Content Locks

To reset the content locks to the factory-default settings:
1. From the PARENTAL CONTROLS menu, highlight Reset Locks and press OK. The TV displays, “Select Reset to restore Parental Controls to the factory defaults.”
2. Highlight Reset and press OK.
3. When the rating type is blocked, the Lock icon appears locked. Content with this rating and all higher ratings cannot be viewed.
4. When the rating type is unblocked, the Lock icon appears unlocked. Content with this rating and all lower ratings can be viewed.
If you want to block all unrated content, highlight Block Unrated Shows and use the Arrow buttons on the remote to select On.
5. When you are finished adjusting the rating level blocks, press the EXIT button on the remote.
43
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

Setting up View Mode

Your TV can display the screens in different modes.
To change the on-screen menu language:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight System and
VIZIO
VIEW MODE
Viewport
Overlay
Centered Overlay
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight View Mode and press OK. The VIEW MODE menu is displayed.
4. Highlight your preferred view mode (Viewport, Overlay, or Centered Overlay) and press OK. All screens will now be displayed in the selected mode.

Changing the Wide Setting

To change the aspect ration:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight Wide and press OK. The aspect ratio options are displayed.
4. Select an aspect ratio. See
Ratio on page 20
for more information.
Changing the Screen Aspect
5. Press the BACK button to change additional settings or EXIT.
44
5

Adjusting the CEC Settings

The California Energy Commission (CEC) function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming.
Not all HDMI devices support CEC. See your device’s user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - To use CEC, you must select On.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.

Turning the Power Indicator On or Off

The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.
To turn the Power Indicator Light on or off:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK. The POWER INDICATOR menu is displayed.
4. Use the Up/Down Arrow buttons to select On or Off, then press OK.
5. Press the BACK button to change additional settings or EXIT.
45
5
Help
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit

USING THE RESET & ADMIN MENU

Restoring the TV to Factory Default Settings

All of the on-screen menu settings can be reset to the factory default settings.
If you restore the TV to the factory default settings, all changes you have made to the settings will be lost!
To restore the TV to its factory default settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is displayed.
4. Highlight Reset TV to Factory Defaults and press OK.
5. If you have changed the default parental control passcode, type it now.
The TV displays, “Select Reset to restore all TV settings to factory defaults and clear all account information.”
6. Highlight Reset and press OK.

USING THE GUIDED SETUP MENU

The TV’s Setup App can be used to easily set up the TV tuner.
To use guided setup:
1. Press the MENU button on the
remote. The on-screen menu is displayed.
2. Highlight Guided Setup and press OK.
3. Highlight the guided setup you want to use and press OK:
• Tuner Setup - Set up the TV
tuner.
4. Follow the on-screen instructions. When finished, press the BACK button to change additional settings or EXIT.
VIZIO
GUIDED SETUP
Tuner Setup
7. Wait for the TV to turn off. The TV will turn back on shortly afterward and the Setup App will begin.
8. To view a demonstration of TV functions on start-up, select Store Demo > On.
46

USING THE INFO WINDOW

The Info Window can be displayed by pressing the INFO or GUIDE button on the remote:
• Press the INFO or GUIDE button one time to display
channel, input, and display information.
• Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the start and end times of the program.
5
Channel/Input Information
28-1
KCET-HD
Oliver’s Holiday Surprise
Oliver wakes up one morning only to discover that his pals are missing. In this hour-long holiday special, Oliver goes on a journey in search of his pals. Who knows what he’ll encounter on the way?
1080p 6:15pm
Program Title/Rating Information
TV-PG-V
Dolby Digital+ Stereo
Program Description
Display Information
Normal
11:00AM - 12:00PM
47
DIGITAL EPISODE GUIDE & INFO WINDOW

Using the USB Media Player

6

USING THE USB MEDIA PLAYER

The USB Media Player allows you to connect a USB thumb drive to your TV and play music, video, or photos.
USB PORT

Playing USB Media

To play your USB media:
1. Connect your USB thumb drive to the USB port on the side of the TV.
2. Press the V button on the remote
3. Use the Arrow buttons to highlight the Multimedia app in the V.I.A. Plus Dock and press OK. (The highlighted App is in the center of the dock.)
4. Use the Arrow buttons to highlight the type of media to display (Music, Video, or Photo) and press OK.
5. Use the Arrow buttons to highlight the file you want to display. Press OK. Music or video files play, photos display.
You can display your photos in fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK.
.

Preparing Your USB drive to Play USB Media

To play USB media, you must first save your files on a USB thumb drive:
• The USB thumb drive must be formatted as FAT32.
• Files on the USB thumb drive must end in a supported file extension (.mp3, .jpg, etc.).
• The player is not designed to play media from smartphones.

Removing the USB Drive from the TV

Do not remove the USB thumb drive while the TV is on. Doing so may damage the drive.
To safely remove your USB drive from the TV:
1. Turn off the TV.
2. Disconnect your USB thumb drive from the USB port on the side of the TV.
48
Connected Sources
Displays connected USB devices.
Back Button Highlight this button and press OK to return to the previous screen.
VIZIO
Photo
USB1:
Back Button Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
VIZIO_2GB\Photo\root
6
Folder Contents
This area displays the contents of the currently selected folder. You can browse files and folders using the Arrow and OK buttons on the remote.
Current Folder
Start Fullscreen Slideshow
Sort by Name or Date
View Thumbnails/Folders
Adjust Slideshow Settings
View Music Files
root
Start Slideshow
Sort:
View:
File Name: D 1920x1080 Resolution: 1920x1080 Size: 1607270KB
Name A-Z
Thumbnails
Settings
Browse Music
Photo Information
Displays the name, resolution, and file size of the currently selected photo.
A.jpg
D.jpg
G.jpg
B.jpg C.jpg
E.jpg F.jpg
H.jpg I.jpg
Page 1 of 1
Page Information
If your USB thumb drive has more files than can be displayed on a single screen, the page information is displayed here.
49
PHOTO VIEWER
Troubleshooting & Technical Support
Do you have questions? Find answers here:
SUPPORT.VIZIO.COM
Find help with:
•New product setup
•Connecting your devices
•Technical problems
•Product updates and more.
A
Live chat support available
You can also contact our award-winning support team:
Phone: Email:
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CSt) Saturday - Sunday: 9 am to 6 pm (CSt)
(877) 698-4946 (toll-free) techsupport@VIZIO.com
50
A
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
different input source.
• If you are using an antenna or cable TV connected directly to the TV, scan for channels. See
Channels
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the POWER button on the remote or on the side of the TV to turn the TV on.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details.
• Adjust Brightness, Contrast, or Backlight. See
the Picture Settings
• Press the INPUT button on the remote to select a different input source.
on page 33.
on page 22.
Finding
Adjusting
There is no sound.
• Press VOLUME UP on the remote control.
• Press the MUTE button on the remote to ensure mute is
off.
• Check the audio settings. See
Settings
• Ensure the speakers are set to On.
• Ensure no headphones are connected to the TV.
• Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
The sound is flat or dialog is not audible.
• Turn off Sound Leveling. See
Settings
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
on page 30.
on page 30.
Adjusting the Picture Settings
Adjusting the Audio
Adjusting the Audio
on page 22.
51
• Check all cables to ensure they are securely attached.
A
The buttons on the remote aren’t working.
• The Red and Yellow hot key buttons below the V button
do not operate with this model.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a button.
• Replace the remote batteries with new ones. See
Replacing the Batteries
The image quality is not good.
• For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
The picture is distorted.
• Nearby electrical devices may be interfering with the TV. Separate the TV from electrical appliances, cars, or fluorescent lights.
on page 11.
The TV has pixels (dots) that are always dark or always lit.
• Your HDTV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product.
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable.
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the screen mode.
52
• See
Changing the Screen Aspect Ratio
on page 20
.
Specifications
Screen Size: 39" Class
Viewable Area: 38.50"
B
D39h-C0
Dimensions w/ Stand:
w/o Stand:
Weight w/ Stand:
w/o Stand:
TV Type: Full Array LED
Refresh Rate: 60 Hz (Effective Refresh Rate)
Maximum Resolution: 1366 x 768 (720p)
Pixel Pitch: 0.62475 mm (H) x 0.62475 mm (V)
Dynamic Contrast Ratio: 200,000: 1
Response Time: 6.5 ms
Viewing Angle: 178°/ 178°
HDMI Inputs: 2
Component Video Inputs: 1
Composite Inputs: 1
34.75" x 22.68" x 8.27"
34.75" x 20.51" x 2.91"
14.11 lbs
13.45 lbs
RF Antenna Input: 1
USB 2.0 Ports: 1
Audio Outputs:
OSD Language: English, Spanish, French
53
RCA Stereo,
Optical Digital
D39h-C0
Remote Control Model: XRT010
B
Certifications:
Compliance:
Voltage Range: 120V @ 60 Hz
Power-On Consumption: 36 W
Standby Power Consumption: 0.2 W
CSA-US, BETS-7/ICES-003, FCC Class B,
HDMI (CEC, ARC), Dolby Digital
Energy Star 6.1
COUNEE
NRCan
54

Limited Warranty

C
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 7:00AM to 11:00PM Monday through Friday and 9:00AM to 6:00PM Saturday and Sunday, Central Standard Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE­AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone
other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If this occurs, your product will be restored to you configured as originally purchased. You will be responsible for restoring all applicable data and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the unit before it is serviced, regardless of the servicer.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new product purchases. To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s product information page (www.VIZIO.com) or look for the “zero bright pixel” guarantee on the box.
55

Legal & Compliance

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
D

Notice

1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Other
Image(s) used under license from Shutterstock.com
56
© 2015 VIZIO INC. ALL RIGHTS RESERVED. 150417MH-US-NC
Loading...