VIZIO
INSTALLATION GUIDE
D24-D1 & D28h-D1
Please read this guide before using the product.
Important safety instructions
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
•To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into theapparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•Unplug the power cord before cleaning your TV.
•WhenmovingyourTVfromanareaoflowtemperaturetoanareaofhigh temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.
•A distance of at least three feet should be maintained between your
TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.
•Slotsand openings inthe back andbottom of thecabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.
•Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuitpartscausingafireorelectricshock.NeverspillliquidsonyourTV.
•Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
•Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer’s warranty does not cover user abuse or improper installations.
•The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
•When connected to a power outlet, power is always flowing into your
TV. To totally disconnect power, unplug the power cord.
•The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.
English - ii
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket should be installed near your TV and easily accessible.
•Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.
•Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
•Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.
•Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock,andotherhazards.Ifrepairisrequired,contactyourdealerand refer all servicing to qualified service personnel.
•WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. Ifwater penetrates intoyour TV, unplugthe power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.
•Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock.
•Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock.
•Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.
•When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.
•To reduce risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
•If any of the following occurs, contact the dealer:
•The power cord fails or frays.
•Liquid sprays or any object drops into your TV.
•Your TV is exposed to rain or other moisture.
•Your TV is dropped or damaged in any way.
•The performance of your TV changes substantially.
•This apparatus shall not be exposed to dripping or splashing and no objectsfilledwithliquids,suchasvases,shallbeplacedontheapparatus.
•The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
•The lightning flash with arrowhead symbol within an Hequilateral triangle is intended to alert the user to thepresence of uninsulated DANGEROUS VOLTAGE within theproduct’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
•Please use caution around the TV: pulling or pushing on the TV may cause the TV to tip or fall over resulting in personal injury and/or property damage.
•WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). with continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.
•Install the TV where it cannot be pulled, pushed or knocked over.
•Do not allow children to hang onto the product.
•Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children.
•The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
English - iii
TV antenna connection protection
Ground Clamp |
Antenna Lead In Wire |
|
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
|
|
|
Power Service Grounding Electrode System |
Electric Service Equipment |
(NEC ART 250, part H) |
•If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
•Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
•Lightning Protection: For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
•Power Lines: Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.
English - iv
Take a moment to register your product
VIZIO.COM/PRODUCT-REGISTRATION
Why register?
Customized Support
Get assistance quickly with your information on hand.
News and Offers
Take advantage of the latest news and special offers from VIZIO.
Safety and Satisfaction
Stay up-to-date with important product updates and notifications.
Table of contents |
|
Package contents.............................................................................................. |
7 |
This is your remote........................................................................................... |
8 |
Inserting and replacing batteries......................................................................... |
9 |
Installing the TV stands.................................................................................... |
10 |
First-Time setup................................................................................................ |
12 |
Connecting to the Internet with Wi-Fi............................................................. |
16 |
Getting Started with VIZIO Internet Apps Plus®............................................. |
18 |
Viewing the on-screen user manual................................................................ |
20 |
Wall-mounting the TV....................................................................................... |
21 |
Additional connections..................................................................................... |
22 |
Connecting a computer......................................................................................... |
22 |
Connecting an audio device.................................................................................. |
24 |
Legal information.............................................................................................. |
29 |
Regulatory information.................................................................................... |
30 |
Limited warranty............................................................................................... |
32 |
English - vi
Package contents
VIZIO
INSTALLATION GUIDE
D24-D1 & D28h-D1
Please read this guide before using the product.
VIZIO LED HDTV |
Multi-Language |
Power Cable |
|
Quick Start Guide |
|
Display |
4 x Phillips |
4 x Phillips |
Basic Remote |
Stands |
Screws |
Screws |
w/Batteries |
|
(For D24-D1) |
(For D28h-D1) |
|
English - 7
This is your remote
2 |
1 |
3 |
4 |
5 |
6 |
7 |
8 |
|
9 |
|
10 |
11 |
12 |
13 |
15 |
14
17 18
16 |
19 |
20 |
|
21 |
22 |
English - 8
1.Power - Turn TV on or Off.
2.Input - Change the currently displayed input.
3.App Launcher - Quickly launch the pictured App. (Also turns on the TV if it is off)
4.Audio/Video Controls - Control USB media player and video streaming playback.
5.Closed Captions - Turn closed captions on or off.
6.Menu - Display the on-screen menu.
7.Exit - Close the on-screen menu.
8.Info - Display the info window.
9.Arrows - Navigate the on-screen menu.
10.OK - Select the highlighted option.
11.Back - Go to the previous on-screen menu.
12.Guide - Display the info window.
13.Volume Up/Down - Increase or decrease the loudness of the audio.
14.V Button - OpentheVIZIOInternetAppsPlus® (V.I.A.Plus)dock.
15.Channel Up/Down - Change the channel.
16.Mute - Turn the audio on or off.
17.Wide - Change the display mode.
18.PIC - Opens the Picture Mode menu.
19.Last - Return to the last viewed channel.
20.Number Pad - Manually enter a channel.
21.Enter - Confirm channel or passcode entered using the number pad.
22.Dash - Use with number pad to manually enter a digital sub-channel. (e.g. 18-4 or 18-5)
Inserting and replacing batteries.
Two AAA batteries are included for you to use with the basic remote control.
To insert/replace the batteries:
1. |
Pressonthearrowandslidethebatterycoveroff. |
|
2. |
Insert two AAA |
batteries (included). Be sure |
|
to align the + |
and - signs on the batteries |
|
and remote. |
|
3. |
Replace the battery cover. |
|
1
2
English - 9
Installing the TV stands
1
Your TV includes a stand designed to support the weight of the TV and keep it from falling over. However, the TV can still fall over if:
•It is placed on an uneven, unstable, or nonlevel surface.
•It is pushed, pulled, or otherwise improperly moved.
•If an earthquake occurs and the TV is not properly secured.
Remove any plastic wrapping from the TV and stands.
Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the
TV on a soft surface such as a carpet, rug, or blanket, and avoid any sharp edges.
English - 10
2
Insert the stands into the base of the TV.
Secure each stand to the TV by inserting and tightening the two (2) included Phillips screws.
When you are finished, place the TV on a stable, level surface.
To ensure proper ventilation, leave at least 1” of space between the back of the TV and any other objects, like walls.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model. |
English - 11 |
|
Loading...