Vizio EXES-6000, CP-64 User Manual

INTERCOM SYSTEM

CP-64

EXES-

6000

CP-64

Functions and

Operating Instructions

TOA ELECTRIC CO., LTD.

KOBE, JAPAN

133-06-081-8

Contents

Stations

Speech

3. Station Operation

3) Hands-free Master Station

4) Hands-free Substation

...............................

Functions

Handset

(HF-620M/630M/631M/650M)

(HF-620S/630S/631S/640S)

.........................

Master

Station

Substation

(TL-600M)

(TL-600S)

................

Introduction to the "Functions and Operating lnstructions" for

Chapter 1. Basic Functions, Their Operating Procedures and

...........

..............

.............. 7

stations

All Functions

for

EXES-6000

..........

5) Hands-free/Handset Master Station

(HF-600M/610M/660M) ....................11

6) Hands-free/Handset Substation (H F-600S/610S) ...13

7) Hands-free/Handset Master Station with Auto-dialer (HF-660M)

Functions:

EXES-6000

......................................

CP-64 .......................

Chapter 2. Functions and Operating Procedures of Single

Exchange System for a Maximum of 256 Stations

1. Part Names and Functions of the Station Keyboard ... 18

Function

3. EXES-6000 CP-64 Summary of Dial Operations (For

4. Description of Each Function

6) Mic Off

10)

11)

12)

13)

14)

15)

16)

17)

18)

19)

20)

Description

Single

Exchange)

Automatic Camp-On-Busy Privacy Camp-On-Privacy Press-To-Talk

Press-To-Talk Single Master Automatic Personal Continuous

Remote

Call

Group Secretary Call

Priority Executive Highest

Line

..............................

..........................

..............................

Control

Digit

Dialing

Sub

Relationship

Access

Number

Calling

Response

Transfer,

Forwarding

Paging

Hunting

Transfer

..............................

Priority

Executive

......................

Release

.........................

...................

.......................

....................

......................

..................

Paging

................

Call

....................

Tone

..................

.......................

during

Normal

......................

........................

.......................

Priority

.................

Call........

23 23 23 24 24

37 38

21)

Conference

22)

Paging

23)

Other

24) How to Select the Paging Area and Make the Paging

25)

All-Call

26)

Combination

27)

Emergency

28)

Paging

29)

Personal

30)

Selectable

31)

Programmable

32)

Group

33) Programmable Restricted Access for Stations

34)

Selectable

35) Selectable Paging Pre-Announcement Tone Duration

36)

Time-Out

37)

Time-Out

38)

In/Out

39)

Destination

40)

Calling

41)

Calling

42)

Pocket

43)

General

44)

Simplified

45)

Clear

...........................

............................................

Paging

Modes

.....................

Call

...........................

Paging

and

Individual

Paging

.....................

All-Call

Priority

Number

First

Blocking

Calling

.............................

of of

Annunciation

Party Party Pager

Purpose

Paging

Entry

and

Paging

.........................

Paging

Station

........................

Tone

Conversation

Paging

Call

.....................

Annunciation

Indication Indication

..........................

Control

.......................

Conversation

Zone

Paging

.................

...................

Number

Numbering

...................

[Lamp [Numerical

.............

............

.................

Indication

..................

Type]

Over

..........

.........

Type]

...........

......

.........51

52 52

55 56 57

59 59

43 44 46

49 49 50

53 54

– 1 –

Chapter 3. Functions and Operating Procedures of Tie-Line

System for a Maximum of 768 Stations

1. Part Names and Functions of the Station Keyboard ... 60

Tie-Line

Function

4. Restrictions Resulting from Tie-Line Connection .. . . 65

5. EXES-6000 CP-64 Summary of Dial Operations (For

Connections

Description

Tie-Line

System)

Exchanges

......................

.............

6. Description of Each Function

Automatic

Camp-On-Busy

Privacy

Camp-On-Privacy

Press-To-Talk

Single

Master

Automatic

Personal

10)

Continuous

11)

Remote

12)

Call

13)

Group

Line

Release

...................

.........................

..............................

.......................

..........................

Digit

Dialing

......................

Sub

Access

Number

Response

Transfer,

Hunting

Relationship

Calling

Paging

.........................

..................

Paging

................

Call

....................

Tone

..................

.......................

during

Normal

Calls

.......

69 69

71 71 72

14)

Secretary

15)

Highest

16)

Conference

17)

Paging

Transfer

Executive

......................

Priority

...........................

.................

..............................

18) How to Select the Paging Area and Make the Paging

Call

...........................

19)

All-Call

Paging

and

Individual

Zone

Paging

......

20) Selectable First Station Number of Each

Exchange

21)

Programmable

22)

Group

............................

Station

Numbering

Blocking

........................

............

23) Programmable Restricted Access for Stations

24)

Selectable

Calling

Tone

..................90

25) Selectable Paging Pre-Announcement Tone

Duration

26)

Time-Out

27)

Time-Out

28)

In/Out

29)

Calling

30)

Pocket

31)

General

32)

Simplified

33)

Clear

........................90

Conversation

Paging

Annunciation

Party

Indication

Pager

..........................

Purpose

Entry

Control

Paging

...................... 97

and

Conversation

................

Call

................... 90

................... 91

[Lamp

Type]

.........

.................. 95

Over

........... 97

.....

92 94

– 2 –

Introduction to the "Functions and Operating Instructions" for stations for EXES-6000

This handbook explains the functions and operating

procedures of stations for TOA's EXES-6000 Intercom

System using central processing unit CP-64 (for single exchange or tie-line system) and exchanges EX-630.

Designed for connection of up to 3 exchanges, the EXES-

6000 system permits you to talk with the person in the

remote area, and also to increase the number of stations

which one (1) exchange cannot cover.

This handbook is comprised of the following 3 chapters:

Chapter 1. Basic functions, their operating procedures

and all functions.

Chapter 2. Functions and operating procedures of single

exchange system (a maximum of 256 stations).

Chapter 3. Functions and operating procedures of tie-

line system (a maximum of 768 stations).

Refer to Chapters 1 and 2 for single exchange system and to Chapters 1 and 3 for tie-line system.

Please note that performances of some functions are restricted in the tie-line system. You need not read all the instructions given in this handbook but it is necessary to read the instructions on those functions employed in your system. The following guide-

lines will help you select the pages that you should read.

Selecting different functions made available by placing the

Privacy Switch in the "ON" position

The EXES-6000 System is designed to allow either "PV" typ operation (The system having Privacy function) or

"NP" type (Without Privacy function) to be selected by

turning on or off a switch inside the exchange. It is impos-

sible to make one station the "NP" type and another the

"PV" type in the same system.

The function provided when the Privacy switch is in the ON position is different between the "PV" and the "NP" type.

Therefore, read the page marked if your system

is of the "PV" type and the Page if it is of the

"NP" type.

"PV" Type and "NP" Type

Type

Definition

System having

Privacy function

System having no Privacy func-

tion

1 . Privacy tone

2. The Handset Master/Sub-

1. Continuous calling tone

2. The Handset Master

Description

With the Privacy switch in

the ON position, a brief

Privacy tone sounds and any incoming call is refused.

station may not be used in

this system. If used, it is

not called by a continuous

calling tone but by a brief

Privacy tone.

A station with the Privacy

switch may be called by the

continuous calling tone

when its Privacy switch is

placed in the ON position.

One touch dialing any key

through

other than the

key or picking up the handset stops the calling

tone and the stations is

made ready to initiate the

response to the call.

station without Privacy

switch may be called by the continuous calling

tone. Picking up the hand-

set stops the calling tone

and allows the conversation.

Note.

By programming, the continuous calling tone function

may be made available to specific stations with the

Privacy switch in the OFF position.

In this event, touch dialing any key through

other than the key stops the calling tone

and permits conversation.

This feature may be employed for the industrial type of station (Model HF-650M) or in the "PV" type system that needs to be continuously called.

– 3 –

Chapter 1

Basic functions, their operating

procedures and all functions

Stations

1. TL-600M

2. TL-600S

3. HF-660M

4. AK-024

5. HF-600M

6. HF-600S

7. HF-610M

8. HF-610S

TL-600S

Desk/Wall-Mounted Handset Master

Station

Desk/Wall-Mounted Handset Sub-

station

Desk / Wall-Mounted Hands-Free / Handset Master Station with AutoDialer (8 keys — 16 registrations)

Auto-Dialer Key Unit (24 keys)

Desk Hands-Free/Handset Master

Station

Desk Hands-Free / Handset Substa-

tion

Flush-Mounted Hands-Free/Hand-

set Master Station

Flush-Mounted Hands-Free / Hand-

set Substation

TL-600M

9. HF-620M

10. HF-620S

11. HF-630M

12. HF-630S

13. HF-631M

14. HF-631S

15. HF-640S

16. HF-650M

Desk/Wall-Mounted Hands-Free Master Station

Desk/Wall-Mounted Hands-Free

Substation

Flush-Mounted Hands-Free Master

Station

Flush-Mounted Hands-Free Sub-

station

Flush-Mounted Hands-Free Master

Station (Stainless steel panel)

Flush-Mounted Hands-Free Sub-

station (Stainless steel panel)

Door Station (Hands-free)

Surface-Mounted Industrial Master

Station (Hands-free)

TL-600M/S

HF-600M

HF-600S

HF-620M

HF-650M

HF-620S

HF-630M

HF-631M

– 4 –

HF-630S

HF-631

HF-610M

HF-640S

HF-660M

HF-610S

Speech functions

Either "PV" Type (the system with Privacy function) or "NP" Type (Without Privacy function) mode should be selected in

the total intercom system.

When Privacy Switch (SW) of station is turned ON, privacy tone is available in "PV" Type system, while continuous calling

tone is available in "NP" Type system.

System

Functions

Dialing

One-Touch Dialing

Calling

Dialing after picking up Handset and

comfirming Dial

tone

Calling by picking

up Handset

Voice

Receiving

Speech

Methods

*1 This function may be employed for the industrial type of station (Model HF-650M) or in the "PV" type system that needs to be con tinu-

Voice Calling

Hands-free Calling

and Conversation

Continuous Calling Tone Response by

One-Touch Dialing

(No. 200 programming)

Privacy

Continuous Calling

Tone.Picking up

Response (in Privacy

Mode)

Continuous Calling

Tone-One-Touch

Response (in Privacy

Mode)

Voice Switch

Conversation

Simplex Conversation by Press-to-

Talk key

Full Duplex

Conversation

ously called.

types

Calls are made by touching dial.

Even if the Privacy SW is on, calling is possible.

Substations can make a call to designated Master

Stations by one-touch dialing. Calling is possible even if the Privacy SW is on.

Calls can be made by touching dial button after picking up handset, and confirming dial tone is heard.

Substations can make a call to designated Master

Stations just by picking up the handset.

When called by continuous calling tone or privacy

tone, voice can be sent by pressing bar.

With touch-dial, after a brief calling tone Hands-free

conversation is available.

With touch-dial, a continuous calling tone is sent. Hands-free Conversation is available when called party

depresses, the or key

When calls are unwanted, turn ON Privacy SW. Then, a

brief privacy tone sounds when called. By turning off

Privacy SW or touching any key ( key)

or picking up a handset, conversation becomes

available.

When called by Continuous Calling Tone, conversation is possible by picking up handset.

Calls can be made just by touching the

or key.

Without picking up handset when called by Continuous Calling Tone.

Voice switch conversation is available automatically,

when two parties speak in hands-free mode.

One-way conversation is available by a party who

presses . R eleasing the bar will reverse

the one-way conversation flow.

Full duplex conversation is available when one or two

parties are speaking using a handset.

Descriptions

Stations *2

Without

Privacy SW

HF-650M

H F-640S

TL-600M

TL-600S

All stations except

HF-640S

HF-650M

HF-640S

HF-650M

—

TL-600M/S

—

HF-640S HF-650M

H F-640S HF-650M

TL-600M/S

HF-640S HF-650M

Privacy SW

HF-660M

HF-600M,

HF-620M,

HF-631M

HF-600S HF-610S,

HF-630S,

HF-660M HF-600M HF-610M

H F-600S HF-610S

H F-660M HF-600M/S HF-610M/S

H F-630M/S

H F-660M HF-600M/S HF-610M/S

HF-660M HF-600M/S HF-610M/S HF-620M/S HF-630M/S HF-631M/S

HF-660M HF-600M/S HF-610M/S

Same as

"Privacy"

HF-660M HF-600M/S

HF-620M/S

HF-630M/S

HF-660M HF-600M/S HF-610M/S HF-620M/S HF-630M/S

HF-660M HF-600M/S

HF-620M/S

With

610M

630M

620S

631 S

620M/S

631 M/S

620M/S 630M/S 631 M/S

610M/S

631 M/S

610M/S

630M/S

F-631

M /S

Privacy

ON/OFF

OFF

ON/OFF

*2 All stations other than the TL-600M/S (Intended for exclusive use in NP type system) may be used in both the PV and NP type system.

– 5 –

Station operation

1) Handset Master Station

< Making a call >

1. Pick up the handset and touch dial the station

Model TL-600M

Handset

number of the party you wish to talk to after hearing

dial tone.

2. Start conversation after the calling tone stops.

3. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line by simply waiting without hanging up the handset. As soon as the line becomes free, your call is auto-

matically connected.

4. While the continuous calling tone is sent, you can

break in on the calling tone by continuously depress-

ing the key to make a voice call through the station speaker of the called party.

In-use lamp

NP Type

Speaker volume switch

Dial keys

key

5. Hang up the handset or depress the key to termi-

nate the conversation.

< Responding to a call >

6. When you are called by the continuous calling tone or paged through your station speaker, respond to the

call by picking up the handset.

Note.

The sound volume of the calling tone may be adjusted by means of a 2-stage volume selector (SP. VOL) switch.

2) Handset Substation

< Making a call >

1. Picking up the handset makes a call to the designated

other station.

2. Start conversation after the calling tone stops.

3. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line

by simply waiting without hanging up the handset.

As soon as the line becomes free, your call is auto-

matically connected.

4. While the continuous calling tone is sent, you can

break in on the calling tone by continuously depressing the key to make a voice call through the

Model TL-600S

Handset

station speaker of the called party.

NP Type

Speaker volume switch

In-use lamp

key

5. Hang up the handset to terminate the conversation.

6. When you are called by the continuous calling tone or paged through your station speaker, respond to the

call by picking up the handset.

Note.

The sound volume of the calling tone may be adjusted

by means of a 2-stage volume selector (SP. VOL) switch.

– 6 –

3) Hands-free Master Station

Speaker volume switch

Microphone

HF-620M

Model HF-620M/630M/631M/650M

Speaker

In-use lamp

Privacy switch

Dial keys

key

HF-630M

HF-631M

PV Type

HF-650M

< Making a call >

1. Touch dial the station number you wish to call, regardless of whether the Privacy switch of your station is in the ON position or OFF position.

2. Start conversation after the calling tone stops.

3. When the line is busy, a busy tone is heard and you can camp on the line by simply waiting. As soon as the line becomes free, your call is automatically connected.

4. During a call attempt made by means of the continuous calling tone or the Privacy tone, you can break

in on the calling tone by continuously depressing the

key to make a voice call through the station

speaker of the called party.

5. When the party you call is in a high noise level area, your continuously depressing the key allows one-way conversation to that party. As long as you

depress the key, your voice has dominance and releasing the key will reverse the one-way conversation from that party to you.

6. To terminate the conversation, depress the key.

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

7. Respond to the call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

8. A brief Privacy tone sounds from your station each time there is an incoming call and all incoming calls are refused. To respond touch dial any key other than the key while the line is connected between you and the calling party.

Note.

1.The sound volume of the speaker may be adjusted by means of the 2-stage volume selector (VOL) switch.

2. With no speaker built inside, the HF-650M needs to be connected to a separate speaker. Also, the HF-650M

is fitted with no Privacy switch.

– 7 –

3) Hands-free Master Station

Speaker volume switch

Microphone

Model HF-620M/630M/631M/650M

HF-620M

Speaker

In-use lamp

Privacy switch

Dial keys

key

HF-630M

HF-631M

NP Type

HF-650M

< Making a call >

1. Touch dial the station number you wish to call, regardless of whether the Privacy switch of your

station is in the ON position or OFF position.

2. Start conversation after the calling tone stops.

3. When the line is busy, a busy tone is heard and you

can camp on the line by simply waiting. As soon as

the line becomes free, your call is automatically

connected.

4. During a call attempt made by means of the continuous calling tone, you can break in on the calling tone by continuously depressing the key to make a voice call through the station speaker of the called party.

5. When the party you call is in a high noise level area, your continuously depressing the key allows one-way conversation to that party. As long as you depress the key, your voice has dominance and releasing the key will reverse the one-way

conversation from that party to you.

6. To terminate the conversation, depress the key.

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

7. Respond to the call after the calling tone stops .

[In the case that the Privacy switch is in the ON posi-

tion.]

8. The continuous calling tone function is made available to any station if its Privacy switch is placed in

the ON position. Depressing any key (

) other than the key causes the continuous calling tone to stop and puts the station in the conversation mode.

Note.

1. The sound volume of the speaker may be adjusted by means of the 2-stage volume selector (V OL ) switch.

2. With no speaker built inside, the HF-650M needs to be connected to a separate speaker. Also, the HF-650M is fitted with no Privacy switch.

– 8 –

4) Hands-free Substation

Speaker volume switch

Microphone

Model (HF-620S/630S/631S/640S)

HF-620S

Speaker

In-use lamp

Privacy switch

Dial keys

key

PV Type

HF-630S

HF-631S

HF-640S

< Making a call >

1. Touching the key makes a call to the designated other station whether the Privacy switch on your station is in the ON position or OFF position.

2. Start conversation after the calling tone stops.

3. When the line is busy, a busy tone is heard and you can camp on the line by simply waiting. As soon as

the line becomes free, your call is automatically

connected.

4. During a call attempt made by means of the continu-

ous calling tone or the Privacy tone, you can break in on the calling tone by continuously depressing the

key to make a voice call through the station

speaker of the called party.

5. When the party you call is in a high noise level area, your continuously depressing the key allows

one-way conversation to that party. A s long as you

depress the key, your voice has dominance and releasing the key will reverse the one-way conversation from that party to you.

6. To terminate the conversation, depress the key.

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

7. Respond to the call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

8. A brief Privacy tone sounds from your station each

time there is an incoming call, and all incoming calls are refused.

To respond, touch dial the or key while the

line is connected between you and the calling party.

Note.

1. The sound volume of the speaker may be adjusted by

means of the 2-stage volume selector (VOL) switch.

2. The HF-640S is fitted with no Privacy switch, nor

key, nor

key.

– 9 –

4) Hands-free Substation

Speaker volume switch

Microphone

Model (HF-620S/630S/631S/640S)

Speaker

In-use lamp

Privacy switch

Dial keys

HF-620S

key

HF-630S

HF-631S

NP Type

HF-640S

< Making a call >

1. Touching the key makes a call to the designated

other station whether the Privacy switch on your station is in the ON position or OFF position.

2. Start conversation after the calling tone stops.

3. When the line is busy, a busy tone is heard and you

can camp on the line by simply waiting. As soon as

the line becomes free, your call is automatically connected.

4. During a call attempt made by means of the continuous calling tone, you can break in on the calling tone

by continuously depressing the key to make

a voice call through the station speaker of the called

party.

5. When the party you call is in a high noise level area,

your continuously depressing the key allows

one-way conversation to that party. As long as you depress the key, your voice has dominance and releasing the key will reverse the one-way

conversation from that party to you.

6. To terminate the conversation, depress the key.

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

7. Respond to the call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

8. The continuous calling tone function is made available to any station when its Privacy switch is in the ON position. Depressing the or key makes the continuous calling tone stop and puts the station in

the conversation mode.

Note.

1. The sound volume of the speaker may be adjusted by

means of the 2-stage volume selector (VO L) switch.

2. The HF-640S is fitted with no Privacy switch, nor key, nor key.

– 10 –

5) Hands-free / Handset Master Station

Handset

Speaker volume switch

Microphone

Model HF-600M/610M/660M (With Auto-Dialer)

Loud speaker

Speaker

In-use lamp

Privacy switch

Dial keys

key

PV Type

HF-600M

< Making a call >

1. Hands-free conversation may be made by simply

touch dialing the station number you wish to call.

2. When you wish to use the handset, pick it up, then touch dial the station number you wish to call, or

reverse the order.

3. Start conversation after the calling tone stops.

4. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line by simply waiting. As soon as the line becomes free,

your call is automatically connected.

5. In the event that the party you are calling does not

respond and the continuous calling tone is still heard

from your station, or when the station of that party

is in the Privacy mode and the Privacy tone is sound-

ed, you can break in on the calling tone by continuously depressing the key to make a voice call

through the station speaker of the called party.

6. During hands-free conversation, when the person you are talking to is in a high noise level area, (1) Pick up the handset to talk or (2) depress the

key continuously for one-way conversation

to that party. As long as the key is depres-

sed, your voice has dominance, and releasing the

key will reverse the one-way conversation

from that party to you.

7. To terminate the conversation, hang up the handset or depress the key.

HF-610M

HF-660M

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

8. Respond to call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

9. A brief Privacy tone will sound from your station each time it receives an incoming call and all incom-

ing calls are refused.

To respond, depress any key

other than the key or pick up the handset

while the line is still connected between your station

and the calling station. These 2 busy stations are,

however, automatically disconnected from the speech

path after approximately 10 seconds from call

establishment if no response is made by you.

Note.

The sound volume of the loud speaker may be adjusted

by means of the 2-stage volume selector ( VOL) switch.

– 11 –

5) Hands-free / Handset Master Station

Handset

Speaker volume switch

Microphone

Model HF-600M/610M/660M (With Auto-Dialer)

Loud speaker

Speaker

In-use lamp

Privacy switch

Dial keys

key

NP Type

HF-600M

< Making a call >

1. Hands-free conversation may be made by simply touch dialing the station number you wish to call.

2. When you wish to use the handset, pick it up, then touch dial the station number you wish to call, or

reverse the order.

3. Start conversation after the calling tone stops.

4. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line by simply waiting. As soon as the line becomes free,

your call is automatically connected.

5. In the event that the party you are calling does not

respond and the continuous calling tone is still heard

from your station, you can break in on the calling

tone by continuously depressing the key to make a voice call through the station speaker of the

called party.

6. During hands-free conversation, when the person you are talking to is in a high noise level area,

(1) Pick up the handset to talk or (2) depress the

key continuously for one-way conversation

to that party. As long as the key is depres-

sed, your voice has dominance, and releasing the

key will reverse the one-way conversation

from that party to you.

7. To terminate the conversation, hang up the handset

or depress the key.

HF-610M

HF-660M

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

8. Respond to call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

9. The continuous calling tone function is made available to any station when its Privacy switch is in

the ON position. Depressing any key (

or ) other than the key or picking up

the handset of the station called causes the continu-

ous calling tone to" stop and puts the station in the

conversation mode.

Note.

The sound volume of the loud speaker may be adjusted by means of the 2-stage volume selector (VOL) switch.

– 12 –

6) Hands-free / Handset Substation

Model HF-600S/610

PV Type

Handset

Speaker volume switch

Microphone

HF-600S

< Making a call >

1. For hands-free conversation, touching the key makes a call to the designated other station whether the Privacy switch on your station is in the ON posi-

tion or OFF position.

2. When you wish to use the handset, pick it up, then touch dial the key to make a call or reverse the

order.

3. Start conversation after the calling tone stops.

4. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line

by simply waiting. As soon as the line becomes free,

your call is automatically connected.

5. In the event that the party you are calling does not respond and the continuous calling tone is still heard from your station, or when the station of that party

is in the Privacy mode and the Privacy tone is sounded, you can break in on the calling tone by continuously depressing the key to make a voice call through the station speaker of the called party.

6. During hands-free conversation, when the person you

are talking to is in a high noise level area,

(1 ) Pick up the handset to talk or (2) depress the

key continuously for one-way conversation

to that party. As long as the key is depressed, your voice has dominance, and releasing

the key will reverse the one-way conversa-

tion from that party to you.

7. To terminate the conversation, hang up the handset

or depress the key.

Loud speaker

Speaker

In-use lamp

Privacy switch

Dial keys

key

HF-610S

< Responding to a call >

[In the case that the Privacy switch is in the OFF position.]

8. Respond to call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

9. A brief Privacy tone will sound from your station each time it receives an incoming call and all incoming calls are refused. To respond, depress the or key or pick-up the handset while the line is still connected between your station and the station calling. These 2 busy stations are, however, automatically disconnected from the speech path after approximately 10 seconds from call establishment if no response is made by you.

Note.

The sound volume of the loud speaker may be adjusted

by means of the 2-stage volume selector (V OL ) switch.

– 13 –

6) Hands-free / Handset substation

Model HF-600S/610S

NP Type

Handset

Speaker volume switch

Microphone

HF-600S

< Making a call >

1. For hands-free conversation, touching the key makes a call to the designated other station whether the Privacy switch on your station is in the ON posi-

tion or OFF position.

[In the case that the Privacy switch is in the OFF posi-

tion.]

2. When you wish to use the handset, pick it up, then

touch dial the key to make a call or reverse the

order.

[In the case that the Privacy switch is in the ON posi-

tion.]

3. Picking up the handset makes a call to the designated

other station.

Loud speaker

Speaker

In-use lamp

Privacy switch

Dial keys

key

HF-610S

< Responding to a call >

[In the case that the Privacy switch is in the OFF

position.]

9. Respond to call after the calling tone stops.

[In the case that the Privacy switch is in the ON posi-

tion.]

10. The continuous calling tone function is made available to any station when its Privacy switch is in the

ON position. Depressing the or key or picking up the handset of the station called makes the continuous calling tone stop and puts the station in the

conversation mode.

4. Start conversation after the calling tone stops.

5. When you hear a busy tone that indicates the party you call is on another line, you can camp on the line

by simply waiting. As soon as the line becomes free, your call is automatically connected.

6. In the event that the party you are calling does not respond and the continuous calling tone is still heard from your station, you can break in on the calling tone by continuously depressing the key to make a voice call through the station speaker of the

called party.

7. During hands-free conversation, when the person you

are talking to is in a high noise level area,

(1 ) Pick up the handset to talk or (2) depress the

key continuously for one-way conversation to that party. As long as the key is depressed, your voice has dominance, and releasing the key wil l reverse the one-way conversation from that party to you.

8. To terminate the conversation, hang up the handset

or depress the key.

Note.

The sound volume of the loud speaker may be adjusted

by means of the 2-stage volume selector (VOL) switch.

– 14 –

7) Hands-free / Handset Master Station with Auto-Dialer

Handset

Registration mode switch

Privacy/In-use lamp

Privacy switch

key

Model HF-660

PV Type

Loud speaker

Auto-Dialer keys

Page selector switch

Entry key

Dial keys

Hands-free microphone

NP Type

< Making a call >

1. Place the auto-dialer registration (REGISTER)

switch in the OFF position.

2. A maximum of 16 single digit dialing numbers including station numbers, personal numbers and paging

zone number may be programmed into the built-in

auto-dialer.

(16 registrations are possible with 8 keys by changing

over the Page selector switch)

You can not only call any station by touch dialing the station selector key but also you can make a call to up to 16 specific, pre-registered stations by depressing the station selector key or by single digit dialing the auto-dialer key of this station.

Expansion of another 24 auto-dialer keys is possible by connecting the AK-024 auto-dialer key unit to the HF-660M.

Registration mode

switch

Auto-Dialer key

Note.

1. For programming the auto-dialer, please refer to the operation manual of the HF-660M.

2. The sound volume of the calling tone can be adjusted by means of the 3-stage selector (SP V OL) switch.

3. For instructions on how to call and respond without

using the auto-dialer, please refer to the information as to the HF-600M/610M.

Dial Keys

(Max. 13 digits)

Entry

key

Registration

mode sw itc h

1. Place the registration mode switch ( ) in the ON position. A lamp turns to green and a confirmation tone is heard.

2. Place the page selector switch in either or position.

3. Press any one of the auto-dialer keys (

), which is to be registered.

4. Register the station or other numbers to be registered by pressing the dial keys ( ) A max-

imum of 13 digits on each auto-dialer key may be reg-

istered

5. Press the entry key ( ). The confirmation tone is again heard and registration is completed.

6. Repeat the procedures described in (2) through (5) each time registration is made.

7. To cancel the registration, press the auto-dialer key

( ) and the Entry Key ( ).

8. Place the registration mode switch ( ) in the

OFF position. The lamp goes out and the normal speech mode will resume.

– 15 –

Functions: EXES-6000 CP-64

No.

Classification

Single Digit

Continuous Calling Tone

PTT

Personal Number

Transfer

Priority

Conference

Paging and Response

Selection of Dial Operation

Restricted Access

Selection

Interface

Function

Automatic Line Release

Camp-On-Busy

Mic-Off

Single Digit Dialing

Automatic Access to Paging

Master/Sub Relationship

Privacy • Camp-On-Privacy/Continuous Calling Tone at Privacy Mode

Continuous Calling Tone • One-touch Response *2

Press-To-Talk

Press-To-Talk Control

Personal Number Call

Personal Number Paging

Remote Response

Call Transfer • Paging during Normal call

Group Hunting

Secretary Transfer

Call Forwarding

Priority

Executive Priority

Highest Executive Priority

Conference

PA Paging • S tation Paging All-Call +31 zones (Single Exchange)/30 zones (2 Exchanges)/

45 zones (3 Exchanges) *7

Combination Paging

Emergency All-Call

Paging Priority

Selectable First Station Number of Each Exchange No. 100/200/300/400/500/600/700/800/900

Output Capacity of Paging Zone

Selectable Dial Operation for Paging Response

Output Capacity of General Purpose Control

Programmable Station Numbering

Group Blocking (Restricted Dialing)

Restricted Access to All-Call Paging

Restricted Access to Conference

Restricted Access

General Purpose Control

Calling Tone • Paging Pre-Announcement Tone Duration *11

Time out of Conversation and Paging Call

IN/OUT Annunciation

Destination Annunciation Indication

Calling Party Indication (Lamp type) (with/without memory)

Calling Party Indication (Numerical type)

Pager (make output type)

General Purpose Control

One-shot make output

Make/break output

8 selectable one-shot make output

8 selectable make output/Decimal output

4 decimal dig its output

One-shot make output

Make/break output

8 selectable one-shot make output

8 selectable make output/Decimal output

4 decimal digits output

Standard Function

* 1

Selectable Function

By DIP

Switch

By No. 200

Programming

Optional Function

Single

Exchange

Tie-line

Own

Exchange

Outside

Exchange

– 16 –

Functions: EXES-6000 CP-64

Notes.

1. XX/YY indicates to select either XX (Function) or YY (Function).

2. Not all circles ( ) in The Switch Selection table correspond to the DIP switches of the CP unit.

*1: "PV" (system with Privacy function) Type: with the

Privacy switch in the ON position, a brief Privacy

Tone sounds.

"NP" (system without Privacy function) Type: A

station may be called by the continuous calling tone when the Privacy switch is placed in the ON position.

*2: When a hands-free station without handset is called

by the continuous calling tone, conversation may

start by touching any key

*3: Using the Press-to-talk control function reduces the

maximum number of paging zone to All call + 23

zones.

*4: This function may not be used if numbers 100

through 199 are used in the Station Numbering Schedule. Either "Personal number call" or "Personal

number paging" may be selected.

*5: Additional equipment is required for paging. *6: Either "Executive Priority" or "Highest Executive

Priority" may be selected.

*7: Each zone of paging provides Station paging and/or

PA paging.

*8: It is necessary to respond only by touching

(without zone No.).

*9: It is possible to make a paging and its response across

the other exchange. However, a response to the zone paging is possible only from a station connected to the exchange having the paged zone.

*10: Station numbers of each exchange can be changed

freely within the range of "Selectable numbering schedule of each exchange".

*11: Calling tone: 0.3 sec (Trill note tone)/0.2 sec (Single

note tone)/none.

Paging pre-announcement tone: 2 sec/1 sec/none.

*12: Selects whether or not the indication of the calling

party station continuously lights up, after the calling party has cancelled the call to a line which is busy or

in the privacy mode.

*13: A call can only be made from the stations No. 200

~ 455 connected to the "A" type exchange. It is

possible to respond from any station.

– 17 –

Chapter 2

Functions and operating procedures

of single exchange system for

a maximum of 256 stations

Part names and functions of the station keyboard

Volume switch Adjusts the volume of the station

speaker.

Pocket Pager response

In-use Lamp

Lights up when the station is on line with another station.

Privacy switch

General purpose control

Registration

Conference

Mic off

Pocket Pager call

Personal number c ancella tion Call Back Conference call clearance

Clear entry during call

Single digit dialing

All-call paging response

Paging c all

Zone Paging Response

Priority

Priority response (Highest) executive priority

End of conversation

Press-to-talk Remote response

– 18 –

Function description

Besides fix ed standard functions, there are selectable

standard functions and optional functions. Selectable standard functions can be selected by chang-

ing over The CP Unit switches and by establishing

station No. 200 programming. Optional functions can be

made available by using external equipment or additional units.

1. Standard Functions

1) Automatic Line Release

The calling Station is released from the speech path if dialing is not completed within 5 seconds. The

calling station is also released from the speech path if

no response is given within 10 seconds, when calling

a station in the privacy mode.

2) Camp-on-Busy When the called party is busy, the caller can camp-on the line. After the conversation is finished, he is automatically put through.

3) Press-to-Talk

One-way conversation is possible by pressing the

Press-to-Talk bar when the ambient noise is high at

one party's station.

4) Mic-off

Line is held temporarily.

5) Remote Response

The station called by continuous calling tone can be

remotely answered by other stations.

6) Single Digit Dialing Single digit calling of numbers up to 4 digits in length can be made by one-touch operation.

2. Selectable Functions

7) Master/Sub Relationship Substations can call Master stations by one-touch operation. In the event of Handset Substation, a call can be made from Substation to its designated master station by simply picking up a handset.

8) Automatic Access to Paging Specific Substations may initiate a Paging Call or Paging Response or Personal Number Call, etc. by

simply picking up a handset.

9) Privacy When calls are unwanted, turn Privacy switch on and a brief privacy tone sounds when the station is called.

10) Camp-on-Privacy When called in the privacy mode from another station, calls can be connected immediately after releasing the Privacy switch.

11) Handset Response in Continuously Called Stations

Full duplex handset conversation is available by lifting the handset when the continuous calling tone is heard.

12) One-touch Response in Continuously Called Stations Hands-free conversation is available by just touching

any key except when the continuous calling

tone is heard.

13) Personal Number Call Calls can be connected by using Personal Numbers,

other than normal station numbers when Personal Numbers are registered into any designated station.

14) Call Transfer The called party can transfer the call to other selected station. Call Hold and Call Back are also possible.

15) Group Hunting

When the first called party in a group is busy, the call

is automatically transferred to the next stations.

16) Secretary Transfer Calls to an "Executive" may be automatically trans-

ferred to a "Secretary".

17) Call Forwarding Calls to stations are automatically transferred to

any other designated station.

18) Priority When the party called is busy, by just sending priority

tone conversation is available if response is given, holding the original conversation.

19) Executive Priority

When the party called is busy, the caller can break in

on the called party without the response, holding the

original conversation.

20) Highest Executive Priority The preprogrammed caller can interrupt forcibly the

called party in busy mode. In this event, original

conversation is cancelled.

21) Selection of Dial Operation Selectable First Station Number

The first station number for system may be selected from any of the following numbers (Hardwired station number): 100/200/300/400/500/600/700/ 800/900.

The system with Personal Numbers can't use No.

100 ~ 199.

Paging Response

Paging response may be made either by pressing

the "Zone No.", or [Simply pressing ].

General Purpose Control Dial digit numbers change the output numbers.

22) Programmable Station Numbering The system has programmable station numbers up to

No. 999 rather than only the normal hardwired

station numbers.

23) Group Blocking (Restricted Dialing)

Stations can be blocked into groups which cannot call or page each other unless further programming is

done.

24) Restricted Access Stations with access to All-call Paging, Conference

and General Purpose Control can be limited.

25) Selectable Calling Tone

(Calling Tone/Paging Pre-Announcement Tone)

The time duration of the Calling Tone can be set for

"long" (Trill note tone) or "short" (Single note tone) or none. Similarly, Paging Pre-Announcement Tone

may be set for "long" (2 sec.) or "short" (1 sec.) or

none.

26) Time-out of Conversation and Paging Call

A Calling Time Limitation can be set, in case paging

and normal calls are to be kept short or where cancelling calls might be forgotten.

– 19 –

3. Optional Functions

27) Station Paging and Response (PI-62 Unit is required) Paging is available through the built-in station

speakers. Paging calls can be responded to by the nearest master station.

28) Paging Priovity and Response (PI-62 Unit is required)

Conversation may be interrupted temporarily to

accept the priority station paging.

29) Combination Paging and Response (PI-62 Unit is required)

Combination paging zones which cover 2 or more

independent paging zones is allowed in the system.

30) Paging during Normal Call Calls can be transferred to a third party after paging

while speaking.

31) Personal Number Paging

Zone paging is made by Personal Numbers when

Personal Numbers are registered into any designated

station within a zone.

32) PA Paging and Response

(PI-62 Unit and PA System are required)

Paging through PA System and response.

33) Emergency All-Call Paging (PI-62 Unit is required) Top priority of all-call paging is available from one

specified station.

34) Conference (CL-62 Unit is required) Conference calls can be made including up to 4

persons.

35) Press-to-Talk Control (PI-62 is required) The operation of Press-to-Talk activates Relay Outputs, thus controlling Door-Lock and Radio Trans-

mitting Equipment.

36) In/Out Annunciation

(Interface for the Indicator Board needs to be made

by using Data Transmitter DT E11 and Receiver DR-

B61) In or Out status is annunciated by registration/

cancellation of Personal Numbers.

37) Destination Annunciation Indication (Interface for the Indicator Board is to be made by

using Data Transmitter DT-E11 and Reciver DR-B61.)

Personal number registered stations are indicated.

38) Calling Party Indication [Lamp Type]

(Interface for the Indicator Board is made by using Data Transmitter DT-E11 and Receiver DR-B61.)

One lamp for one calling station. This can memorize

the station numbers of stations which put through

calls to stations in the privacy or busy modes.

39) Calling Party Indication [7-SEG Display Type]

(In terface for the Indicator Board is made by using Data Transmitter DT-E11 and Receiver DR-B61.)

A numerical type calling party indication panel can

be provided at certain specified stations.

40) Pager Calling and Response

(Interface is accomplished by using Data Transmitter DT-E11 and Receiver DR-B61) Pagers with relay input interface can be connected.

41) General Purpose Control (Make the Indicator Board and General Purpose

Control Interface by using Data Transmitter DT-E11

and Receiver DR-B61)

Various types of Relay Output modes for control are available. Use as Remote Control for such applica-

tions as In/Out Annunciation, Destination Annuncia-

tion Indication, VTR and ITV.

42) Simplified Paging

Simplfied PA paging is possible if an external speaker

is connected instead of a station.

– 20 –

Classification

EXES-6000, CP-64 Summary of Dial Operations (For single exchange system)

Function

Press-to-talk

Remote response

Remote response registration

Continuous calling tone response

Privacy

Privacy off

Dial operation

Simplex

Duplex

Confirmation tone

Number

Station No.

Description

Conversation is simplex when PTT bar is used.

When a station is called by continuous calling tone, near station in the groups can respond the call instead of the called station.

Group registration of stations can be made from

each sta tion .

Called party touches one of these keys then conversation may begin.

When a party dose not wish to accept incomming calls, set the Privacy Switch in the ON position.

Call

Secretary transfer

Single digit registration

Single digit dialing

Personal number registration In/Out annunciation-lamp ON

Personal number cancellation In/Out annunciation-lamp OFF

Personal number cal l Personal number paging

Conference

Conference clear

Call forwarding registration

Mic off

Priority/priority response

Executive priority/ Highest executive priority

Call transfer

Secretary transfer off

Registration dials (maximum 4 digits)

Busy tone

Call conversation

Confirmation tone

Calling

Confirmation tone

Station called

Calling

Transfer

Conversation original station

with

1000 ~ 1999

Station No., Personal No., Single digit number

Transfered Station No.

Station No., Personal No.,

Single digit number

This function allows for automatic transfer of calls to a secretary when desired.

This function allows for single digit registration of up to 4 digits among the numbers 0 through

9 and the key.

Registered dial code may be automatically dialed.

Personal number may be resistered at any master station which the person to whom the number is assigned expects to be.

When anyone having a personal number leaves the office he merely cancels the programming of his personal number.

A personal number dialing enables the station call or zone paging for a person having the personal number.

A conference call may be made with up to 4 persons. Participants must be called individually.

If a person called into a conference is absent, the conference may be returned to the original

condition.

This function allows for automatic transfer of call to another station which number is registrated already.

This function is used to temporarily hold a con-

versation, causing a holding tone to sound at both

stations. The line is thus kept open until the party who operates the mic off switch re-dials and the call is continued.

When the called party is busy, this function

signals to request p riority. The party requesting

can ta lk after the called party responds.

When the called party is busy, this f unction allows

interruption of the existing conversation and

immediate direct contact with the called party.

The called party can transfer the call to a selected other station (by station number, personal number

or single digit number).

21 - -

Classification

Function

All-call plus9-zone paging

All-call plus 31-zone paging

Dial operation

Number

0 (All-call),1 ~ 8(9) (Zone)

(9 : When combination paging is not

used)

00 (All-call), 01 ~ 31 (Zone)

Description

Any station can be used to initiate PA or station paging. A person paged can respond fr om th e nearest master station.

Paging

Display and

Control

Data

Transmitting

and

Receiving

Unit

Combination paging

Al I -call response

Zone paging response

Paging transfer

One-shot make output

Make/break output

8-selectable one-shot make output

8-selectable output

(Decimal output)

4 decimal digits output

Make output for Pager control

Pocket Pager response

Calling party selection

Clearing calling party indication

Conversation

Conversation after response

Unit No.

Condition No.

4-digits

Paging

(Make)

(Break)

Condition No.

Transfer

Conversation with

original station

0 ~ 9 (Combination)

000 ~ 499

000 - 511

1 ~ 8

0000 ~ 9999

01~31 90~99

1 ~ 8, 0 (Clear)

(0-9)

1 ~9,

0-8(9) (00-31)

90-99

1 ~ 9

01 ~ 64

(01 ~ 99)

1 ~ 9

00 ~ 99

Station No.

00-49

00-99

Seve ral zones may be paged simultaneously.

Response to all-call

Response to zone paging or combination paging.

This function allows a called party to transfer the call to a third party who responds to paging.

One-shot make output of relay may control other equipments such as ITV camera, VTR control, dictating systems, etc.

Make/break output of relay may control other

equipments.

8-selectable one-shot make is available (VTR control)

8 selectable outputs or a decimal output is available (indicating room status and destination).

4 decimal digits output is indicated.

Control the pocket pager by mak e output of

relays.

When the indication panel shows several incoming calls at the same, the called party may select any of them for response.

This is used to cancel the calling party indication

without conversation.

22 - -

Automatic Line Release

When, in dialing, all of the numbers are not dialed within

5 seconds, the station is automatically disconnected from the speech path and dialing cannot be completed. In this

instance, the dialing process will have to be repeated from

the beginning.

This function has been adopted to speed up traffic proces-

sing and to improve the availability of speech path.

Camp-On-Busy

When the party you are calling is on another line, by simply

waiting you automatically "Camp-On" the line. (Busy tone sounds continuously.) As soon as the line is freed, you will

be automatically connected.

Within 5 sec

After call

Call

Privacy

Shift Privacy Switch to ON.

When a party does not wish to accept incoming calls, this function may be employed to refuse them. With the Privacy switch in the ON position, a continuous privacy tone will be sounded in the station making the call, and at the same time, a brief Privacy tone will sound in the station called,

indicating a call attempt is being made.

It is possible to call the other party from the station in the Privacy mode but Remote Response is impossible

from that station.

Shift Privacy Switch back to the left.

To restore a station in the "Privacy" mode to a normal condition, and thus ready to receive calls.

Note: 1. A call received while the station is in the Privacy

mode may be accepted if the Privacy function is immediately cancelled. (see Camp-On Privacy)

2. With a station that incorporates the Secretary Transfer function, the Privacy switch is used to

activate the Secretary Transfer function, (see Sec-

retary Transfer)

3. During the above "Privacy" mode, while the call -

ing station has the bar depressed, the

privacy tone stops and the caller can transmit a

one way message.

When the bar is released, the normal

"Privacy" mode to be resumed.

PV Type

One tone

Privacy tone

Call

– 23 –

Camp-On Privacy

When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp-

On" the line. (Privacy tone sounds continuously.) As soon as the Privacy mode is released, or as soon as he one-touch dials any of the keys ( ), or as soon as he picks up a handset of his station, you will be automati-

cally connected.

This function is canelled automatically if the station in the privacy mode may not accept the call within approximately

10 seconds.

PV Type

Press-To-Talk

This function is activated when the

(Press-To-Talk Bar)

is continuously depressed after dial tone confirmation or during hands-free conversation. This allows one-way con-

versation from the party depressing the function key. When

the key is released, one-way conversation is reversed. Employed when a person in a high noise level area is called

by a person in a quiet area, or when no particular response is required, or when simple announcements are made. In

such cases, one-way conversation flow can be used.

One-way conversation is activated while the Press-To-Talk

bar is continuously depressed.

As long as the Press-To-Talk bar is depressed by either party, the voice of the party using this function has dominance. When the key is released, the other party has dominance.

One-way conversation is reversed when the Press-To-Talk bar is released.

Mic Off

Automatic

If both parties depress the Press-To-Talk bar, the voice of

the party who depresses the bar last will have dominance.

Depress the

return

ordinary

Note.

hands-free

2-way

conversation

........

One-way conversation is impossible even if the

bar is depressed as far as either party or both parties involved pick up a handset.

Touch dialing of

during a conversation turns off that station's microphone,

and a holding tone is heard at both stations involved.

This function is used when for one reason or another it is

desirable to stop a conversation temporarily. With this

function in use, a holding tone is transmitted to both the

calling and the called station while the conversation is

interrupted.

Touch dialing

again cancels the Mic-Off function, and the conversation

can be resumed.

When it is desirable to resume the conversation interrupted

with the Mic-Off function, the function may be cancelled

by the Party who operates the Mic-Off.

Call

Holding tone

Again

Call

– 24 –

Press-To-Talk Control

Touch dialing the specific station number.

One way conversation is activated while the Press-To-Talk bar is continuously depressed, same as the Press-To-Talk (selected simplex) function, and a relay is activated with continuous make-contact.

One way conversation is reversed when the Press-To-Talk bar is released, and the relay is activated with break-contact.

Note.

1. Stations No.232 through No.239 (8 stations) are the specific stations.

2. It is possible to use a relay make output for Door

Remote or for controlling Radio Transmitting/

Receiving Equipment through user provided inter-

face.

3. The relay output of the Paging Interface Unit PI-62

is used for this purpose.

Adaption of this function permits the paging of only all-call plus 23 zones (the paging of all-call + 31 zones

is impossible.)

PTT

Control

The relay of PI-62 unit

A specific station

(No.232 - 239)

– 25 –

Single Digit Dialing

Single digit registration

Single digit dialing

When required, dial

Confirmation tone

Station number

Confirmation tone

Personal number

Confirmation tone

Paging zone

Confirmation tone

Any four digits

Any three digits

Any two digits

Single digits of station number

Single digit of personal number

Single digit of paging call

Single digit of All-call paging response

Confirmation tone

and the registered number will be called automatically.

Note:1. Single digit registration can be cancelled by registering

your assigned station number.

2. Any function dialing with long operation may be shortened by Single Digit Dialing.

Example: Single digit Combination paging Dial

and is called automatically.

Combination paging

Single digit

3. One-shot make output may be operated even in

the event every link is not free. But it may not be operated in single digit dialing if all links are busy.

4. Single digit registration is not available from any substation programmed by No.200 programming, even if its line is connected with master station.

– 26 –

Master Sub Relationship

Master/Substation associations are set up by using station

#200 as the programming station. Once these relationships

have been established, substations can then contact their

designated master stations by simply touch dialing

If TL-600S Handset substation is used, substations can be

connected to their designated master stations by simply

picking up a handset. (Only applicable to

system)

With respect to this function, the stations in the system are

divided into two categories; master stations and substations. Any master station can be connected to any other station in the system. However, substations can initiate calls only to specific master stations. This is done by single touch dialing, and will only connect the substation to one specific master.

Several substations can be programmed under this station to connect with a single specified master station.

To register single digit dialing, touch dial

substation number

Single digit dialing from that master to a specific substation is then accomplished by touch dialing

Master Station

Handset substation

Only applicable to

Single Digit Registration of Substation

system

Substation

Programming a master station for Single Digit Dialing of a substation number under this function is programmed in

the same manner as other single digit dialing, and results in one touch dialing from master to substation.

Note.

Single digit registration is not available from any substa-

tion programmed by No.200 programming, even if its

line is connected with master station.

Automatic Access To Paging

Once programming has been set up for the purpose of this function.

A paging call may be made from specific Handset Sub-

stations to the registered zone by simply picking up a handset. Refer to Fig. 1

A specific Handset substations may respond to the paging

call by simply picking up a handset. Refer to Fig. 2

Note.

Single digit registration for Handset Substation as well as No.200 programming is required for this function at

the time of installation.

Master Station

Paging call

Paging ca ll

Substation Number

Substation

NP Type

Fig. 1

Paging response

– 27 –

Response to

a paging call

Fig. 2

+ 72 hidden pages