Vizio C-BC511C User Manual

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.

• Keep this instructions handy for future reference.

INSTALLATION MANUAL

CEILING MOUNTING COVER

C-BC511C C-BC511C-S

Thank you for purchasing TOA ceiling mounting cover. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

2. GENERAL DESCRIPTION

The ceiling mounting cover is designed to be used for mounting the Combination Camera (C-CC514, C-CC564 and C-CC574) and/or Network Combination Dome Camera (N-CC2564) to a ceiling directly. Using this cover in conjunction with the C-BC511P Ceiling Suspension Bracket or the C-BC511W Wall Mounting Bracket also permits the camera to be suspended from the ceiling or mounted to the wall. Two types of ceiling mounting covers are available: the C-BC511C (transparent cover version)and C-BC511C-S (smoked cover version). Since camera orientation cannot be seen from outside the enclosure when the C-BC511C-S is used, it is more effective in enhancing the effect of surveillance.

Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.

CAUTION

• Attach the ceiling mounting cover to the camera’s base unit securely. If not attached securely, the cover could fall off, resulting in personal injury.

* When using the C-BC511U-S, the subject's illumination must at least be 5 times brighter than when using

the C-BC511C.

Note: The design and specifications are subject to change without notice for improvement.

Case : PC/ ABS resin, cool gray

Dome cover : Acrylate resin, transparent (C-BC511C

)

: Acrylate resin, smoked (transmittance: approx. 20 %)* (C-BC511C-S

)

ø168 (W)X182.2 (H)mm (ø6.6 (W)X7.2 (H)inch), (dome external diameter : ø125 mm (ø4.9 inch))

220 g (0.5 lb)

C-CC514, C-CC564, C-CC574, N-CC2564

Finish

Dimensions

Weight

Applicable camera

Be sure to carefully read the installation manual supplied with the camera.

1. Attach the base unit to the ceiling. Mounting anchor bolt (female screw) : M4

2. Connect cables and attach the camera unit to the base unit.

3. Align the ceiling mounting cover’s positioning mark with that on the base unit and insert the camera unit to the base unit.

4. Rotate the ceiling mounting cover clockwise unit until it locks into place.

[ Main body mounting view ]

[ Back view ]

3. INSTALLATION

4. SPECIFICATIONS

133-05-393-7A

Combination Camera (optional) C-CC514 C-CC564 C-CC574

Network Combination Dome Camera (optional) N-CC2564

Ceiling

Base unit

Camera unit

Ceiling Mounting Cover C-BC511C C-BC511C-S

Base unit

Back face

Align the marks.

Ceiling mounting cover