Vivotek CMA-E01 User Manual

Ordering part no.: 900040000G

QIG Part no.: 625039500G

CMA-E01 User Guide

LED dimming

These are four pre-defined lighting
strength levels.

LED dimming fine-tune

These buttons can be used to
change the lighting strength levels
from 100% to 20%.

Rev. 1.0

Beam angle selectors

(Only available for motorized illuminators, e.g., CM48i8a-1040)
These buttons provide quadruple proportions of adjustable
angles from the narrowest, 33%, 66%, to the widest. These angles vary
with different models. When a beam angle is selected, you can use
the fine-tune buttons below to tune for a desired effect.

100%

75%

50%

25%

Dimming

Zoom

LED

On/Off

LED on/off

Unlock

Remote control is disabled by default.
Unlock the remote control by pressing this button for
2 seconds. The control is automatically locked after

LED

Status

50%

being idle for 5 mins.

LED status

The button toggles the LED indicators on or off.
The LEDs are only visible on the non-IR illuminators,

20%

T

10%

W

such as w5.

Light sensor sensitivity

These buttons provide direct access to the pre­defined light sensor thresholds that turn the LEDs on.

Angle fine-tune

After a preset beam angle is selected, use these buttons
to fine-tune. T stands for tele, W for wide.

1

This page is intentionally left blank.

2