Vivotek CMA-B05, CMA-B06 Installation Guide

Ordering part no.: 900039600G - CMA-B05

Ordering part no.: 900039500G - CMA-B06

QIG Part no.: 625039200G

Type 1

Type 2

CMA-B05 Installation Guide

No. of
illuminators
2

Applicable Brackets: Adjustable

Pole-mount: AM-311, AM-312

Included screws
Angle
Yes Hex socket: M6x1 x 12

Rev. 1.0

Corner-mount: AM-411, AM-412

3

CMA-B06 is required.

Yes Hex socket: M6x1 x 15

Pole-mount: AM-311, AM-312
Corner-mount: AM-411, AM-412

Type 1 Installation: Dual Illuminators

1. Install the base plate directly to a wall, to a pole-mount, or to a corner-mount bracket. Refer to the
Installation Guide that came with the mounting brackets for more information.

110

86

30 ~

30 ~

Using Pole- and corner­mount brackets (M6)

3535

1515

86

116

*48.4

2. Secure the retention bracket to the base
plate using 6 M6 socket screws. You can
tilt its angle while doing it.

n 8.4

4x n 6.2

Direct wall
mount (M5x3)

1

3. Secure the illuminators to the brackets using 4 included hex socket screws. If preferred, you can turn the
illuminators to be facing outwards to avoid over-lapping the IR light coverage areas.

Type 2 Installation: 3 Illuminators Using the CMA-B06 Extension Bracket

1. Install the base plate directly to a wall, to a pole-mount, or to a corner-mount bracket. See page 1 for
information.

2. Secure the B06 extension brackets to the side of illuminators .

2