Vivotek AW-IHT-0602 Installation Guide

AW-IHT-0602 Industrial EN50155 M12 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-IHT-0602 is a rugged M12 PoE switch designed for delivering a max. of 30 watts to powered devices. The uplink

port can be used to extend the connection to a remote site. With ruggedized and M12 connection design, it is t for IP

surveillance in transportation applications in critical environments. The machine features a total budget of 126 watts and
a wide range of operating temperatures ranging from -40°C to 75°C.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide

IMPORTANT:

1. Install the switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. DC input (24V~56VDC). Follow the printed polarity for V+, V-, and Ground.

CONNECTION

WARNING - Always ground the power source to maintain a clean power input.

LAN/WAN

VDC 24~56

Alarm output

LED DEFINITIONS

PW1 ON When V1+ and V1- are connected.
PW2 ON When V2+ and V2- are connected.
PW-FAIL

(Relay LED)
LAN

(Data LED)

PoE LED

- Green

ON Either PW1 or PW2 is conncted.
OFF Both PW1 or PW2 are connected.
ON Link port is detected.
OFF Link port is not detected.
Flashing Data is being transmitted or received.
ON PD is detected.
OFF PD is not detected.
Flashing Port is active, or current is over-loading.