Vivotek AP-FXC-0150 Installation Guide

AP-FXC-0150 and AP-FXC-0250 PoE Extender

Quick Installation Guide

Part no.: 625029100G

AP-FXC-0250

INTRODUCTION

The AP-FXC-0250 is a PoE extender capable of feeding 15.4/30W power to powered devices for a distance of up to 300
meters. Multiple extenders can be cascaded to increase the cabling distance and the number of powered devices.

PACKAGE CONTENTS

• 1x PoE extender • 1x Quick Installation Guide

IMPORTANT:

1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the extender are not blocked.

3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.

CONNECTION

Following are the conditions for making the cabling:

1.Use18~19Ω,24AWGCAT5cables.

2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.

3. The transaction on the PoE extender consumes 2W of power. Therefore, on Line2, the total power requirement is:
C1*+C2+C3+R1**+R2+(5W***x5).
If every camera consumes 5W, the total consumption is 44W.
* Cn = camera consumption,
** Rn = extender consumption, 2W.
*** A typical 100 meters connection induces a 5W power loss due to resistance.

AW-FED-0500
PoE switch

Uplink

100m

AP-FXC-0250 AP-FXC-0250

R1

Line2

LED DEFINITIONS

POWER Green ON Power link is connected from the PoE source.

Green OFF Power is off.

PoE IN Green ON PoE IN port is connected.

Fast blinking Data is being transmitted or received.
OFF No connection.

OUT# Green ON Port is linked to a powered device.

OFF No device is connected.

100m

100m

C1

R2

C2

100m

100m100m

C3

AP-FXC-0150

INTRODUCTION

The AP-FXC-0150 is a PoE extender capable of feeding 15.4/30W power to powered devices for a distance of up to 300
meters. Multiple extenders can be cascaded to increase the cabling distance and the number of powered devices.

PACKAGE CONTENTS

• 1x PoE extender • 1x Quick Installation Guide

IMPORTANT:

1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the extender are not blocked.

3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.

CONNECTION

Following are the conditions for making the cabling:

1.Use18~19Ω,24AWGCAT5cables.

2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.

3. The transaction on the PoE extender consumes 2W of power. Therefore, on Line2, the total power requirement is:
C1*+R1**+R2+(5W***x3).
If the camera consumes 5W, the total consumption is 24W.

* Cn = camera consumption,
** Rn = extender consumption, 2W.
*** A typical 100 meters connection induces a 5W power loss due to resistance.

AW-FED-0500
PoE switch

Uplink

100m

AP-FXC-0150 AP-FXC-0150

Line2

LED DEFINITIONS

POWER Green ON Power link is connected from the PoE source.

Green OFF Power is off.

PoE IN Green ON PoE IN port is connected.

Fast blinking Data is being transmitted or received.
OFF No connection.

OUT# Green ON Port is linked to a powered device.

OFF No device is connected.

100m 100m 100m

C1R1 R2

Allspecicationsaresubjecttochangewithoutnoice.

Copyright © 2014 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

|T: [phone]| F: [phone]| E: [e-mail]