VIVO STAND-TV55T Instruction Manual

Portable TV Tripod

Instruction Manual

SKU: STAND-TV55T

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.

https://vivo-us.com/products/stand-tv55t

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

[e-mail]

www.vivo-us.com 309-278-5303

Chat live with an agent!

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

PACKAGE CONTENTS

A (x1)

Tripod Base

F (x2)

M6x50

Carriage Bolt

K (x1)

Wrench

M-A (x4)

M5x14

M-F (x4)

M5/M8 Spacer

B (x1)

VESA Plate

G (x6)

M6 Lock Nut

M-B (x4)

M6x14

M-G (x8)

5mm Spacer

C (x1)

Le VES A

Bracket

H (x4)

Plastic Washer

M-C (x4)

M6x30

M-H (x8)

15mm Spacer

D (x1)

Right VESA

Bracket

I (x10)

Metal Washer

M-D (x4)

M8x30

E (x1)

Mounting

Bracket

J x4)

M6x12 Bolt

M-E (x4)

M8x50

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

2

TOOLS NEEDED

Phillips

Screwdriver

ASSEMBLY STEPS

STEP 1

Unfold the Tripod Base (A) and
tighten the lower knob.

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

77lbs

(34.93kg)

STEP 2

Loosen the upper knob on the Pole of the Tripod Base (A),
adjust the Pole to the desired height, insert the retainer
pin, then tighten the upper knob.

A

3