Electric Honey Extractor
Instruction Manual
SKU: BEE-V004E
Scan the QR code with your mobile device or follow the link forhelpfulvideosandspecificationsrelatedtothisproduct.
https://vivo-us.com/products/bee-v004e
help@vivo-us.com www.vivo-us.com 1-800-371-5654
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS
KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
If you do not understand these directions, or if you have any doubts about thesafetyoftheinstallation,pleasecallaqualifiedtechnician.Check carefullytomakesuretherearenomissingordefectiveparts.Improper installationmaycausedamageorseriousinjury.Donotusethisproduct foranypurposethatisnotexplicitlyspecifiedinthismanualanddonot exceedweightcapacity.Wecannotbeliablefordamageorinjurycausedby impropermounting,incorrectassemblyorinappropriateuse.
PREPARATION
1.Aftercarefullyremovingthemachinefromthepackingcarton,remove allprotectivefilmandcleanthehoneyextractorthoroughlywithmild soapandwaterBEFOREfirstuse.
2.Thehoneyextractorshouldbeplacedonadry,flatstablesurface
CAUTION: SHARPEDGES
MACHINE STRUCTURE
ClearLids
Honey Extractor
Drum
LegBolt |
Honey Gate with |
|
LidandORing |
||
|
Leg |
WingNut |
|
|
PACKAGE CONTENTS |
|
|
|
|
1 (x1) |
|
Honey Extractor |
2 (x1) |
|
HoneyGatewithLid |
|
|
|
3 (x1) |
|
HexNut(onHoneyGate) |
4 (x1) |
|
O RIng (Pre-installed on Honey Gate) |
5 (x3) |
|
Leg |
6 (x6) |
|
LegBolt |
7 (x6) |
|
Washer |
|
|
|
8 (x2) |
|
Lid(withaSafetySwitch) |
9 (x8) |
|
M4 Bolt |
|
|
|
10 (x8) |
|
M4Nut |
11 (x3) |
|
Stability Bolt |
ASSEMBLY STEPS
STEP 1
Attach legs to extractor using the included bolts (6) and washers (7).
2 |
3 |