Package Contents
Display
VKA05 OPS Module
(with Antenna)
Remote Control Power Cable
Wall Mount VGA Cable USB Cable Audio Cable
Stylus x 3 Documentation CD Batteries Quick Start Guide
Installing the OPS Module
Ports and Connectors (Right)
With Android OPS Module Installed
Ports and Connectors (Bottom)
Display Overview (Rear)Display Overview (Front)
1
Remove the 2 screws
securing the slot cover
onto the display, and then
remove the slot cover.
3
Tighten the two captive
screws on the OPS
module until the module
is properly secure in the
display, and then install
the antenna.
2
Slide the OPS module into
the OPS slot.
1 Magnetic Stylus Holder 6 Input Source / Settings Button
2 IR Sensor (for Remote Control) 7 Volume Down Button
3 Power Button / Status Indicator LED 8 Volume Up Button
4 Home Button 9 USB 3.0 Port
5 Back Button 10 USB 2.0 Ports x 2
1 Right Handle 6 Power Socket 11 HDMI Out Port
2 Windows OPS Slot 7 Speakers 12 USB 2.0 Port
3 Wall Mount Screw Holes 8 Antenna Connector 13 HDMI In Port 1 (2.0)
4 Left Handle 9 Power Indicator LED 14 HDMI In Port 2 (1.4)
5 Power Switch 10 microSD Card Slot 15 Touch Port 1
1 2 3 4 5 6 7 8 9 10
16 DisplayPort In Port 21 LAN (RJ-45) Port 26 Audio Out Jack
17 VGA In Port 22 HDMI In Port 3 (1.4) 27 USB 2.0 Port
18 USB 3.0 Port 23 Audio In Jack 28 AV In Port
19 Recovery Button 24 Touch Port 2 29 RS-232 Port
20 USB 3.0 Ports x 2 25 Coax Out Jack 30 [DISABLED] LAN (RJ-45) Port
LAN
HDMI OUTUSB 2.0
Micro SDUSB3.0RECOVERY
USB 3.0VGA INAUDIO INDP INHDMI IN 3(1.4) TOUCH 2TOUCH 1HDMI IN 2(1.4)HDMI IN 1(2.0)
USB 2.0AV INCOAX OUTRS232 AUDIO OUTLAN
1 2 3
5 6 7
4
USB 2.0AV IN COAX OUTRS232 AUDIO OUTLAN
25 26
27 28 29 30
8 9
20191021
11 12 13 14 15 16 17 18
22 23 24
LAN
HDMI OUT USB 2.0
Micro SDUSB3.0RECOVERY
USB 3.0VGA INAUDIO INDP INHDMI IN 3(1.4) TOUCH 2TOUCH 1HDMI IN 2(1.4)HDMI IN 1(2.0)
Quick Start Guide
(For LK6530i, LK7530i and LK8630i models)