Vivitar Vivicam 5110 User Manual

USER’S MANUUSER’S MANU

USER’S MANU

ALAL

READ THIS FIRST

Trademark Information

 Microsoft® and Windows

are U.S. registered trademarks of Microsoft Corporation.

 Pentium® is a registered trademark of Intel Corporation.  Macintosh is a trademark of Apple Computer, Inc.  SD

is a trademark.

 Photo Explorer is a trademark.  Other names and products may be trademarks or registered trademarks of their respective owners.

Product Information

 Product design and specifications are subject to change without notice. This includes primary product

specifications, software, software drivers, and user’s manual. This User Manual is a general reference guide for the product.

 The product and accessories that come with your digital camera may be different from those described in this

manual. This is due to the fact that different retailers often specify slightly different product inclusions and accessories to suit their market requirements, customer demographics, and geographical preferences. Products very often vary between retailers especially with accessories such as batteries, chargers, memory cards, cables, carrying cases/pouches, and language support. Occasionally a retailer will specify a unique product color, appearance, and internal memory capacity. Contact your dealer for precise product definition and included accessories.

 The illustrations in this manual are for the purpose of explanation and may differ from the actual design of your

digital camera.

 The manufacturer assumes no liability for any errors or discrepancies in this user manual.  For user manual and driver updates, refer to our website or contact your dealer.

SAFETY INSTRUCTIONS

Read and understand all Warnings and Cautions before using this product.

Warnings

If foreign objects or water have entered the camera, turn the power OFF and remove the batteries.

Continued use in this state might cause fire or electric shock. Consult the store of purchase.

If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries.

Continued use in this state might cause fire or electric shock. Consult the store of purchase.

Do not disassemble, change or repair the camera.

This might cause fire or electric shock. For repair or internal inspection, ask the store of purchase.

Do not use the camera in areas near water.

This might cause fire or electric shock. Take special care during rain, snow, on the beach, or near the shore.

Do not place the camera on inclined or unstable surfaces.

This might cause the camera to fall or tilt over, causing injury.

Keep the batteries out of the reach of children.

Swallowing batteries might cause poisoning. If the battery is accidentally swallowed, immediately consult a physician.

Do not use the camera while you are walking, driving or riding a motorcycle.

This might cause you to fall over or result in traffic accident.

WARNING: Handling the USB on this product may expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Cautions

Insert the batteries paying careful attention to the polarity (+ or –) of the terminals.

Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking.

Do not fire the flash close to anyone’s eyes.

This might cause damage to the person’s eyesight.

Do not subject the LCD monitor to impact.

This might damage the glass on the screen or cause the internal fluid to leak. If the internal fluid enters your eyes or comes into contact with your body or clothes, rinse with fresh water. If the internal fluid has entered your eyes, consult a physician to receive treatment.

A camera is a precision instrument. Do not drop it, strike it or use excessive force when handling the camera.

This might cause damage to the camera.

Do not use the camera in humid, steamy, smoky, or dusty places.

This might cause fire or electric shock.

Do not remove the battery immediately after long period of continuous use.

The battery becomes hot during use. Touching a hot battery might cause burns.

Do not wrap the camera or place it in cloth or blankets.

This might cause heat to build up and deform the case, resulting in fire. Use the camera in a wellventilated place.

Do not leave the camera in places where the temperature may rise significantly, such as inside a car.

This might adversely affect the case or the parts inside, resulting in fire.

Before you move the camera, disconnect cords and cables.

Failure to do this might damage cords and cables, resulting in fire and electric shock.

Notes on Battery Usage

When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below:

 Different battery types and surrounding temperatures may affect the battery performance.  Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life

and reduce camera performance. This low temperature will also influence Alkaline battery performance, therefore Ni-MH rechargeable batteries are highly recommended.

 New rechargeable batteries or rechargeable batteries that have not

been used for an extended period of time (batteries that pass the expiry date are exceptions) might affect the number of pictures that can be taken. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use.

 The battery may feel warm when using the camera for an extended period of time or using the flash

continuously. This is normal and not a malfunction.

 The camera may feel warm when being used continuously or for an extended period of time. This is

normal and not a malfunction.

 If you will not be using the batteries for an extended period of time, remove them from the camera to

prevent leakage or corrosion.

 Never use batteries of different types (together) or mix old and new batteries.  Always ensure that the battery terminals are clean.  Never use manganese batteries.  There is a risk of explosion if the batteries are replaced by an incorrect type.  Dispose of used batteries according to the instructions.

CONTENTS

INTRODUCTION ............................................... 8

Overview ........................................................... 8

Package Contents ............................................ 9

Optional Accessories ........................................ 9

COMPONENTS GUIDE .................................... 10

Front View ......................................................... 10

Rear View .......................................................... 11

Control Panel .................................................... 12

LED Indicators .................................................. 13

Scene Modes .................................................... 14

LCD Monitor Information .................................. 15

PREPARING YOUR VIVICAM 5110 .............. 20

Installing the Batteries ...................................... 20

Loading an SD Memory Card

(Optional Accessory) ........................................ 21

Setting the Date and Time ............................... 22

Choosing the Language ................................... 22

Attaching the Camera Strap ............................. 23

BASIC FUNCTIONS ......................................... 24

Turning the Power On ...................................... 24

Using the LCD Monitor ..................................... 25

Using the Normal Mode .................................... 26

Adjusting the Zoom ........................................... 27

Using the Flash ................................................. 28

Using the Self-Timer ......................................... 30

Using the Macro Mode .................................... 31

Setting the Image Resolution and Quality ...... 32

SHOOTING-LETTING YOU SELECT

SETTINGS ...................................................... 3 4

Auto Mode ......................................................... 34

Sports Mode ...................................................... 35

Night Scene Mode ............................................ 36

Portrait Mode ..................................................... 37

Landscape Mode .............................................. 38

Backlight Mode ................................................. 39

MOVIE MODE ................................................... 40

IMAGE PLAYBACK ......................................... 41

Single Image Playback ..................................... 41

Magnifying Images ........................................... 42

Viewing Nine Images At A Time ....................... 43

Viewing Video Clips .......................................... 44

Automated Playback (Slide Show) .................. 44

Protecting Images ............................................. 45

DELETING IMAGES ......................................... 46

Deleting Individual Images or Video Clips.......46

Deleting All Images/Video Clips ...................... 47

Formatting an SD Memory Card or Internal

Memory .............................................................. 48

CONNECTING TO A PICTBRIDGE COMPLIANT

PRINTER....................................................................49

TRANSFERRING RECORDED IMAGES/VIDEO CLIPS

TO YOUR COMPUTER.............................................51

Step 1: Installing the USB Driver................................52

Step 2: Connecting the ViviCam 5110 to Your

Computer.................................................................53

Step 3: Downloading Recorded Images/Video

Clips.........................................................................54

EDITING SOFTWARE INSTALLATION..................55

Installing Photo Explorer.......................................55

Installing Adobe Acrobat Reader..........................56

User’s Manual.......................................................57

USING VIVICAM 5110 AS A PC CAMERA

...........................................................................58

Step 1: Install the PC camera driver (same as

USB driver)........................................................58

Step 2: Connect ViviCam 5110 to your

computer............................................................59

Step 3: Run your application software (i.e.Windows

NetMeeting)........................................................59

LIST OF MENU OPTIONS...................................60

Capture Menu.....................................................60

Playback Menu...................................................66

Video Menu........................................................67

Setup Menu........................................................68

CONNECTING YOUR VIVICAM 5110 TO OTHER

DEVICES............................................................70

VIVICAM 5110 SPECIFICATIONS.......................71

INTRODUCTION

Overview

Your new stylish ViviCam 5110 delivers high quality, 2560 x 1920 resolution images using a 5.0 Megapixels CCD sensor. Using the 1.5" LTPS color image LCD monitor, you can compose images and then examine them in detail. An auto-flash sensor automatically detects the shooting (lighting) conditions and determines whether the flash should be used. This feature helps ensure that your images turn out right.

16MB internal (built-in) memory lets you capture and store images without the need for an additional memory card. However, you may wish to expand the memory capacity by using an external memory card.

In addition to still images, you can record short videos by using the movie function.

Images you have taken can be downloaded to your computer using the USB cable. You can enhance and retouch your images on your computer by using the provided editing software, or image editing software you may already own. You may share your images with your friends via e-mail, in a report, or on a website.

Package Contents

Carefully unpack your camera and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.

 Digital Camera ViviCam 5110  Camera Strap  User’s Manual  Software CD-ROM  USB Cable  Camera Pouch

Optional Accessories

 2 AA Batteries (Ni-MH recommended)

1. Battery/SD card cover

2. Shutter button

3. Power switch

4. Self-timer indicator

COMPONENTS GUIDE

Front View

OPEN

5. Flash

6. Microphone

7. Lens

8. Macro switch

Rear view

OPEN

1. Strap eyelet

2. Up/Thumbnail button

3. Right/OSD On/Off button

4. Down/Flash/Delete button

5. Left/Self-timer button

6. Tripod socket

7. USB connector

8. LCD monitor

9. MENU button

10.MODE button

11.LED indicator

Control Panel

1. Arrow button (Up)

Thumbnail button

2. Arrow button (Right)

OSD On/Off button

3. OK button

Digital zoom button

4. Arrow button (Down)

Flash button

Delete button

5. Arrow button (Left)

Self-timer

LED Indicators

Indicator Status Description/Activity Sound

LED indicator None The camera is powering up Yes *(1)

LED indicator Solid green The camera is powered and ready No

LED indicator Blinking green Charging the flash No

LED indicator Blinking green Image is being recorded to the memory card No

LED indicator Solid green USB communication/transfer in progress No

LED indicator Solid green The camera is ready to record images Yes *(1)

(or movies)

Self-timer indicator Blinking red The self-timer function is activated Yes *(Sec)

---- ---- Shutter button pressed Yes *(1)

(1) The camera sounds one beep.

(Sec) The self-timer sounds 10 beeps for 10 seconds, 5 beeps for 5 seconds.

Scene Modes

Mode Description

1. [ A ] Auto mode Select this option to leave all the adjustments to

the camera and take images casually.

2. [ ] Sports mode Select this option to capture fast-moving subjects.

3. [ ] Night Scene mode Select this option to take images of people against

dark or nighttime background.

4. [ ] Portrait mode Select this option to make people stand out with the background out-of-focus.

5. [ ] Landscape mode Select this option to capture images of distant scenery or landscapes.

6. [ ] Backlight mode Select this option to brighten subjects that are backlit and would come out dark if no flash was used.

Select the scene mode suitable for the occasion or situation.

LCD Monitor Information

4. Remaining pictures

5. [ ] Card indicator

6. Battery level [ ] Fully battery level

[ ] Fairly consumed

[ ] Nearly exhausted

[ ] Virtually no battery power

1. Scene mode [ A ] Auto mode

[ ] Sports mode

[ ] Night Scene mode

[ ] Portrait mode

[ ] Landscape mode

[ ] Backlight mode

2. Image quality [ ] Fine

[ ] Normal

[ ] Economy

3. Image size

[ ] 2560X1920

[ ] 2048X1536

[ ]1280X960

[ ] 640X480

7. ISO speed (no indication for Auto) Auto

[

ISO 100

] 100

[

ISO 200

] 200

8. Sharpness

[ H ] High

[ ] Medium

[ L ] Low

9. Color

[ ] Full Color

[ ] Black & White

[ ] Sepia

10. Saturation

[ ] High

[ ] Medium

[ ] Low

These indicators are displayed when recording still images:

11. Flash mode

[ ] Fill flash (on)

[ ] Flash off

[ A ] Automatic flash

[ A ] Red-eye reduction

12. [ ] Self-timer mode

13. [ ] Macro mode icon

14. White balance (no indication for auto white balance)

Auto

[ ] Daylight

[ ] Cloudy

[ ] Sunset

[ ] Tungsten

[ ] Fluorescent

15. EV compensation

These indicators are displayed when playing images back:

2 of 10

1. Playback mode

2. [ ] Card indicator

3. Battery level [ ] Fully battery level

[ ] Fairly consumed

[ ] Nearly exhausted

[ ] Virtually no battery power

4. [ ] Protect indicator

5. Index number of total number

These indicators are displayed when recording video clips:

REC

12:20

1. Movie mode

2. Recording indicator

3. Video counter

4. [ ] Card indicator

5. Battery level [ ] Fully battery level

[ ] Fairly consumed

[ ] Nearly exhausted

[ ] Virtually no battery power

These indicators are displayed when playing video clips back:

00:52 2 of 10

1. Playback mode

2. Battery level

[ ] Fully battery level

[ ] Fairly consumed

[ ] Nearly exhausted

[ ] Virtually no battery power

3. [ ] Card indicator

4. Index number of total number

5. Movie mode

6. Elapsed time

7. Elapsed playback indicator

PREPARING YOUR VIVICAM 5110

Installing the Batteries

You can use 2 AA size batteries (Ni-MH recommended) to power ViviCam 5110.

1. Make sure your ViviCam 5110 is off.

2. Slide the battery/SD card cover lock.

3. Insert the batteries according to the correct polarity marks (+ or -).

4. Close the battery/SD card cover lock firmly.

Note:

 Never use manganese batteries.  Never use different types of batteries (together) or mix old and new batteries.  Avoid using the batteries in extremely cold environments as low temperatures may shorten the battery life

and reduce the camera performance.

 Low temperature will influence Alkaline battery performance, Ni-MH rechargeable battery is recommended.  If you won’t be using the batteries for an extended period of time, remove them from the camera to prevent

leakage or corrosion.

 New batteries or batteries that have not been used for an extended period of time (batteries that pass the

expiry date are exceptions) might affect the number of pictures that can be taken. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use.

Loading an SD Memory Card (Optional Accessory)

Your ViviCam 5110 comes with 16MB of internal memory, allowing you to store images and video clips in the camera. However, you can also expand the memory capacity by using an SD memory card. Optional SD memory cards provide removable, reusable storage for images and video clips.

1. Make sure your ViviCam 5110 is off.

2. Slide the SD card/battery cover lock.

3. Insert the SD memory card.  If the card cannot be inserted, check the orientation.

4. Close the SD card/battery cover lock firmly.

Note:

 To prevent valuable data from being accidentally deleted from an SD

memory card you can slide the write protect tab (on the side of the SD memory card) to "LOCK"when it is removed from your camera.

 To save, edit, or delete data on an SD memory card, you must unlock the

card.

 Be sure to format the memory card with this camera before its initial usage.

To remove an SD memory card

1. Make sure your ViviCam 5110 is off.

2. Slide the SD card/battery cover lock.

3. Press lightly on the edge of the memory card and it will eject.

Note:

 Memory cards may become hot during use; observe due caution when removing memory cards.

Setting the Date and Time

The Date/Time screen will be presented if/when:

 ViviCam 5110 is turned on for the first time.  ViviCam 5110 is turned on after removing the batteries for a long

period of time.

1. Enter the values of the year, month, day and the time by using

the / / / button.

 To increase the value, press the button.  To decrease the value, press the button.

2. Press the button after all fields are set.

Choosing the Language

Follow the steps below to set the OSD (On-Screen Display) language.

1. Select a language that you prefer by using the / button.

2. Press the button after all fields are set.

Note:

 The language setting will be retained even if the camera is turned off.

+ 50 hidden pages

Vivitar Vivicam 5110 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual