Vitek VT-HDOC16BR-2T, VT-HDOC16BR-4T, VT-HDOC16BR-50T, VT-HDOC16BR-6T, VT-HDOC16BR-8T Quick Start Guide

QUICK START GUIDE

VITEK

FEATURES

• 8 & 16 Channel Stand-alone Real-time Video Recorders

OnCue Bridge

8 & 16 Channel Complete

Analog HD - T/A/C & IP

Recording Solution

* Complete User

Manual on included

USB Flash Drive.

• Supports Analog HD - T/A/C & IP Cameras with automatic format detection

• Full HD MegaPixel Real-time recording, live display, and playback

• Panorama (Thumbnail) Search

• HDMI 2.0 (4K), VGA, and BNC Outputs

• Plug and Play & Auto configuration for IP Cameras via OnVIF or generic protocol

• Point-Of-Sale (POS) Integration

• Alarm In/Out

• 2-way Full Duplex Audio

• Video Analytics with Search Feature (Camera Dependent)

• Remote Viewing via CMS Software, Internet Explorer, and Mobile Phones (iOS/
Android)

• Web-based remote configuration

• Advanced Video Detection: Camera tampering, Camera lens blocking, Day&Night,
Defocus

• Supports up to 30TB Internal Storage (VT-HDOC16BR) / 12TB Internal Storage
(VT-HDOC8BR)

• eSATA for storage extension of up to 5 more HDD

• Configurable Advanced Mirroring (Dual Recording, RAID1)

• RS-485 / CoC (Control Over Coax) PTZ Control

PLEASE NOTE:

Documentation, Software, Tools, and Updates are available online.
Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads

OnCueBridge:QuickStartGuide

1

①

② ③

④

⑤

⑥

⑦

⑧ ⑨

⑩

⑪

⑫

⑥ ⑦

⑧ ⑨

④① ② ③

⑤

⑩

⑪ ⑫

BNC & TVI-Full HD for 8/16ch)

(Ethernet & Local

USB 2.0 ports. Provides functions ‘Copy to USB



1) Installation:

1. HD-SDI or Analog Camera Inputs

EX-SDI / HD-SDI / Analog HD Camera input (A

nalog HD / TVI / CVI / 960H)

2.Audio Inputs

RCA connectors for t audio signal input

(4 x Audio In)

3.Alarm(Sensor) Inputs, RS-485, and Relay
Output

• Alarm (16ch: 16 x Input, 8ch: 8 x Input, 4ch: 4 x
input)

• RS-485 Signals. (D+: RX/TX + signal, D-:
RX/TX- signal)

• Relay output for relay 2 (NO: Normal Open, NC:
Normal Closed, CM: Common)

4.eSATA Connection Port(Option)

connect e-SATA storage to expand HDD

5.Audio Output

RCA connector for audio signal out. (Line out)

6. CVBS Monitor Output & TVI HD Spot

Composite video output for the spot live screen. (

7.VGA Output (Video Graphic Array)

15-pin D-sub connector for the analogue VGA

output.

8.DIGITAL VIDEO OUT

Digital video output for the main monitor (HDMI).

9.RJ-45 Network Port( 1G Base-T)

• Port for IP camera

• 8&16ch : 1G base-T

Port)

• 4ch : 100M base-T (Ethernet Port)

10.Rear USB 2.0 ports

storage’, ‘F/W Upgrade’ and ‘mouse’ operation.

11.Power In

12V DC Power socket.

12.Power Switch

Switch to turn the DVR ON & OFF.

OnCueBridge:OperationManual

2



2) Camera Connection (Coax):

Connect any of the following formats to the BNC inputs (1)

• EX-SDI

• HD-SDI

• TVI

• AHD

• CVI

• CVBS

The OnCue Bridge will Auto detect which format is connected and begin recording using the default settings of 8fps
Continuous.

3) Camera Connection (IP):

To connect an IP camera to the Bridge there are two ways to do this

1) To connect a camera from an offsite location enter main menu and click on "Camera", then Click on "CAM
PORT" to pop-up the following screen:

On this screen under "TYPE" choose which channel to use for the IP camera and choose "MANUAL"

Next click on the next to TYPE and a submenu will open.

