Vitek VT-1817 G User manual
ACTIVE SPEAKER SYSTEM 5.1
MODEL VT-4020 SR
2
10
www.vitek-aus.com
INSTRUCTION MANUAL
4020.qxd 15.07.2005 16:39 Page 1
Know these safety symbols
Safety Precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: Please read the following important safeguards carefully to ensure safe operation.
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Follow Instructions - All operating instructions should be
followed.
4. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
5. Power Source - The appliance should be connected to a
power supply only of the type specified in the operating
instructions or as marked on the appliance.
6. Power-cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
7. Water and Moisture - The appliance should not be used
near water (for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, etc.)
8. Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper ventilation. Do not use the appliance on a bed, sofa, rug or
similar surface that may block the ventilation openings.
9. Heat - Keep the appliance away from heat sources such
as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
10. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
11. Damage requiring service - The appliance should be
serviced by qualified service personnel when:
a/ The power-supply cord or the plug has been damaged; or
b/ Objects have fallen or liquid has been spilled into the
appliance; or
c/ The appliance has been exposed to rain; or
d/ The appliance does not appear to operate normally or
exhibits a marked change in performance; or
e/ The appliance has been dropped, or the enclosure
damaged.
12. Servicing - The user should not attempt to service the
appliance beyond that specified in the operating instructions. All other servicing should be referred to qualified
service personnel.
13. Clean only with dry cloth.
14. Do not defeat the safety purpose of the polarized or
groundingtype plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet.
15. Unplug this apparatus during lightning storms or when
unused for long periods of time.
ENGLISH
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The "exclamation point" calls attention to
features for which you should read the
enclosed literature closely to prevent operating and maintenance problems.
This "bolt of lightning" indicates uninsulated material within your unit which may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
4020.qxd 15.07.2005 16:39 Page 2
ENGLISH
3
FRONT PANEL CONTROLS AND FUNCTIONS
1. 2CH: 2 Channel Input Indicator.
2. 5.1CH: 5.1 Channel Input Indicator.
3. INPUT Button.
4. QSOUND: Surround Sound select button.
5. REMOTE SENSOR: Remote Receiver.
6. STANDBY: Power Standby.
7. VOL-: Volume Down.
8. VOL+: Volume Up.
9. MUTE: Power Standby and Mute Indicator.
10. QSound: virtual 3D Stereo Indicator.
11. QSurround: virtual 5.1 Stereo Indicator.
REAR PANEL - CONTROLS AND FUNCTIONS
12. 5.1CH Rear Left Audio Input
13. 5.1CH Centre Audio Input
14. 5.1CH Subwoofer Audio Input
15. 5.1CH Rear Right Audio Input
16. Speaker Output:
FR: Front Right Speaker Output
FL: Front Left Speaker Output
C: Centre Speaker Output
RL: Rear Left Speaker Output
RR: Rear Right Speaker Output
17. AC Power Cord
18. Power On/Off Switch
19. 5.1CH Front Left Audio Input
20. Stereo Left Audio Input
21. Stereo Right Audio Input
22. 5.1CH Front Right Audio Input
4020.qxd 15.07.2005 16:39 Page 3
SYSTEM CONNECTION INSTRUCTION
ENGLISH
4
4020.qxd 15.07.2005 16:39 Page 4
Use the SPEAKER OUTPUT jacks on the rear panel of main unit to connect the satellite speakers.
Connection example:
Note: Be sure to match the speaker cord to the appropriate jacks on components: "+" to "+", and "-" to "-".
ENGLISH
5
4020.qxd 15.07.2005 16:39 Page 5
ENGLISH
6
REMOTE CONTROLLER
23. POWER: Power Standby.
24. SURROUND: Surround Decoder.
25. INPUT: Input Switch.
26. BALANCE L: Left Speaker Balance.
27. RL +: Rear Left Balance Output Up.
28. C +: Center Output Up.
29. RL - : Rear Left Balance Output Down.
30. BASS +: Bass Output Up.
31. VOL +: Main Volume Up.
32. BASS -: Bass Output Down.
33. MUTE: Output Suspension.
34. PRESET: Location Retrieval.
35. BALANCE R: Right Speaker Balance.
36. RR +: Rear Right Balance Output Up.
37. RR -: Rear Right Balance Output Down.
38. C -: Centre Output Down.
39. TREBLE +: Treble Output Up.
40. TREBLE -: Treble Output Down.
41. VOL -: Main Volume Down.
4020.qxd 15.07.2005 16:39 Page 6
Loading...