Vision Fitness X6600iNetTV User Manual
Assembly
Guide
X6600iNetTV
COMMERCIAL ELLIPTICAL TRAINER
2
STEP
4
STEP
1
STEP
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find
your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new Elliptical Trainer. If any parts, hardware or tools are missing, please call
1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent
loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before
completely tightening any ONE screw.
Assembly
Guide
X6600iNetTV
COMMERCIAL ELLIPTICAL TRAINER
3
STEP
TOOLS & PARTS INCLUDED
CONSOLE BOX
iNetTV Console
Owner’s Guide
5MMAllen Wrench
17MMSocket Wrench
Screwdriver
8MML-Shaped Wrench
PARTS BOX
Console Mast Cover, Qty: 1
Water Bottle & Cage, Qty: 1
Heart Rate Chest Strap, Qty:1
Link Arm Covers, Qty: 2
Pedal Support Brackets, Qty: 2
Dual Action End Caps, Qty: 2
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
6
MM
Allen Wrench
10MML-Shaped Wrench
Loading...