Vision Fitness X6600HRT-DA User Manual

Guide

Assembly

X6600HRT/DA

DUAL-ACTION ELLIPTICAL TRAINER

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding though, find your new Elliptical Trainer’s serial number located below the power switch, and enter here:

Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Elliptical Trainer, to prevent

loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

dual-action elliptical trainer

STEP

X6600HRT/DA

5MMAllen Wrench

Screwdriver

6MML-Shaped Wrench

TOOLS & PARTS INCLUDED

PARTS BOX

Heart Rate Chest Strap, Qty: 1

Power Supply, Qty: 1

Arm Bracket Covers, Qty: 2

Logo Endcaps, Qty: 2

Stabilizers, Qty: 2

Stabilizer Covers, Qty: 2

Water Bottle and Holder, Qty: 1

Console Mast Cover Plate, Qty: 1

Assembly Guide

Owner’s Guide Warranty Card

Parts Bags

Tools

+ 5 hidden pages