Vision Fitness X6200HRT-DA, X6000DA User Manual

Guide

Assembly

X6000DA & X6200HRT/DA

DUAL-ACTION ELLIPTICAL TRAINERS

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding though, find your new Elliptical Trainer’s serial number, located on the front foot axle tube, and enter here:

Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Elliptical Trainer, to prevent

loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

dual-action elliptical trainers

STEP

X6000DA

X6200HRT/DA

5MMAllen Wrench

13MMWrench

Screwdriver

5MML-Shaped Wrench

TOOLS, HARDWARE, & PARTS INCLUDED

PARTS BOX

Rear Folding Axle, Qty: 1 • Stabilizer w/ Rubber Cover, Qty: 2

Toe Pieces, Qty: 2 • Rear Wheels, Qty: 2

Tension Control Knob, Qty: 1 (Model X6000DA only)

Console, Qty: 1 • Power Supply, Qty: 1 (X6200HRT/DA only)

• 13

Nut Cap, Qty: 2 • Water Bottle & Bracket, Qty: 1 •

Heart Rate Chest Strap, Qty: 1 (Model X6200HRT/DA only)

Parts Bags • Owner’s Guide • Assembly Guide • Warranty Card

PINK BAG

M8 x 80MMBolt

Quantity: 4

M8 x 45MMBolt

Quantity: 2

(X6000DA only)

M8 Nylock Nut

Quantity: 4

ORANGE BAG

M8 x 16MMBolt

Quantity: 4

+ 5 hidden pages