Vision Fitness X6200HRC-DA User Manual

FITNESS

VISION

Guide

Assembly

MODELS X6200HRC/DA & X6000DA

DUAL-ACTION ELLIPTICAL TRAINERS

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding
though, enter your new Elliptical Trainer’s serial number here:

Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Elliptical Trainer, to prevent loos-

ening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt.

Before you begin…

dual-action elliptical trainers

5

STEP

1

STEP

3

STEP

4

STEP

X6000DA

X6200HRC/DA

2

STEP

5MMAllen Wrench

13MMWrench

Screwdriver

5MML-Shaped Wrench

TOOLS & HARDWARE INCLUDED

M8 x 80MMBolt

Quantity: 4

M8 x 13

MM

Nylock Nut

Quantity: 4

M8 x 45

MM

Bolt

Quantity: 2

BLUE BAG

BLACK BAG

M8 x 16MMBolt

Quantity: 4

19MMD x 440MML Rear Folding Axle

Quantity: 1

(not shown to scale)

3