Vision Fitness X6100 User Manual
Assembly
Guide
X6100 AND X6000
FOLDING ELLIPTICAL TRAINERS
5
STEP
1
STEP
4
STEP
3
STEP
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find
your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent
loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before
completely tightening any ONE screw.
Assembly
Guide
X6100 AND X6000
FOLDING ELLIPTICAL TRAINERS
2
STEP
TOOLS & PARTS INCLUDED
17MMWrench
Screwdriver
5MML-Shaped Wrench
PARTS BOX
Console Mast Boot, Qty: 1
Dual Action Link Arm Covers, Qty: 2
Dual Action Axle Covers, Qty: 2
Child Safety Guard Hardware Package, Qty:1
Rear Stabilizers, Qty: 2
Pedal Support Bracket, Qty: 2
Water Bottle & Cage, Qty: 1
Power Supply, Qty: 1 (X6100 ONLY)
Tension Knob, Qty: 1 (X6000 ONLY)
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
6
MM
L-Shaped Wrench
13MMWrench
Loading...