Vision Fitness X1400, X1500 User Manual

Assembly

Guide

X1400 AND X1500

ELLIPTICAL TRAINERS

STEP

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:

Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12.

NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loos-

ening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw.

Assembly

Guide

X1400 AND X1500

ELLIPTICAL TRAINERS

STEP

TOOLS & PARTS INCLUDED

Screwdriver

5mm L-Shaped Wrench

PARTS BOX

13mm Wrench

Console Mast Boot

Dual-Action Link Arm Covers

Dual-Action Axle Covers

Pedal Arm Joint Covers

Right and Left Footplates

Rear Stabilizers

Water Bottle and Cage

Power Supply (X1500 only)

Tension Knob and Bracket (X1400 only)

Color Coded Hardware Bags

Owners Manual Assembly Guide

Warranty Card

13mm Wrench

Quantity: 1

GREEN BAG

5mm T-Shaped Wrench

M8 Nut

Quantity: 2

M8x40L Bolt

Quantity: 2

8x18x1T Washer

Quantity: 2

Q235 Knuckle Pin Quantity: 2

(located in parts box)

+ 7 hidden pages