Vision Fitness ST760 User Manual
ST760
LEG/CALF PRESS
Assembly &
Owner’s Guide
2
3
ASSEMBLY GUIDE . . . . . . . . . . . . . . . . 4
HARDWARE BAGS . . . . . . . . . . . . . . . . 6
STEP 1: ORANGE BAG . . . . . . . . . . . . 10
STEP 2: BLUE BAG . . . . . . . . . . . . . . . 11
STEP 3: PINK BAG . . . . . . . . . . . . . . . 12
STEP 4: GREEN BAG . . . . . . . . . . . . . . 13
STEP 5: BLACK BAG . . . . . . . . . . . . . . 14
STEP 6: YELLOW BAG . . . . . . . . . . . . 15
STEP 7: RED BAG . . . . . . . . . . . . . . . 16
ASSEMBLY GUIDE OWNER’S GUIDE
RESISTANCE TRAINING BENEFITS
& TIPS, WORKOUT VARIATIONS . . . . . . 18
TRAINING PROGRAMS . . . . . . . . . . . . 19
STRETCHING . . . . . . . . . . . . . . . . . . . 20
MAINTENANCE SCHEDULE . . . . . . . . . . 22
COMMERCIAL WARRANTY . . . . . . . . . . 23
WORKOUT LOGS . . . . . . . . . . . . . . . . 24
Table of Contents
4
To avoid possible damage to this Leg/Calf Press, please follow these assembly steps in the correct order. Before
proceeding, find your new Leg/Calf Press serial number located on the back of the center floor support (AG2),
and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your
own records. Be sure to read your Owner’s Guide before using your new Leg/Calf Press.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: During assembly, it is recommended to ensure that all bolts are in place and partially threaded before completely
tightening any one bolt. During assembly steps 1 thru 4, do not completely tighten any bolts until completion of Step 4.
Assembly &
Owner’s Guide
ST760
LEG/CALF PRESS
5
g
2
STEP
1
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
Pinch Point
Decal
General Warnin
Decal
Serial #
ORANGE BAG
6
BLUE BAG
HARDWARE INCLUDED
10.2 x 22 x 2
Flat Washer
Quantity: 3
M10 Nylon Nut
Quantity: 1
M10 x 120 Bolt
Quantity: 1
10.2 x 22 x 2
Flat Washer
Quantity: 16
M10 Nylon Nut
Quantity: 8
M10 x 120 Bolt
Quantity: 2
M10 x 48 Bolt
Quantity: 2
M10 x 70 Bolt
Quantity: 2
M10 x 25 Bolt
Quantity: 1
M10 x 60 Bolt
Quantity: 2
7
PINK BAG
GREEN BAG
HARDWARE INCLUDED
M5 x 10 Bolt
Quantity: 24
5.2 x 10 x 1.5
Flat Washer
Quantity: 24
5.1 x 9.3 x 1.3
Lock Washer
Quantity: 24
M8 x 62 Bolt
Quantity: 2
8.4 x 15.5 x 1.6
Flat Washer
Quantity: 4
M8 Nylon Nut
Quantity: 2
M10 x 123 Bolt
Quantity: 2
10.2 x 22 x 2
Flat Washer
Quantity: 4
M10 Nylon Nut
Quantity: 2
10.2 x 18.4 x 2.5
Lock Washer
Quantity: 8
M10 x 25 Bolt
Quantity: 8
20 x 30 x 1
Spacer/Teflon Washer
Quantity: 8
98mm Shaft (Z18)
illustration not to scale
Quantity: 2
105mm Shaft (Z19)
illustration not to scale
Quantity: 2
10 x 25 x 2
Flat Washer
Quantity: 8
8
BLACK BAG
YELLOW BAG
HARDWARE INCLUDED
M5 x 10 Bolt
Quantity: 22
10.2 x 22 x 2
Flat Washer
Quantity: 2
M10 Nylon Nut
Quantity: 1
Bushing
Quantity: 2
M10 x 70 Bolt
Quantity: 1
Slip-On Nut
illustration not to scale
Quantity: 2
M5 x 15 Bolt
Quantity: 6
9
RED BAG
HARDWARE INCLUDED
M10 x 25 Bolt
Quantity: 8
Pull Pin
Quantity: 1
10.2 x 22 x 2
Flat Washer
Quantity: 4
M10 Nylon Nut
Quantity: 2
M10 x 75 Bolt
Quantity: 2
Loading...