Vision Fitness ST250 User Manual
Assembly
Guide
ST250
LEG PRESS
2
To avoid possible damage to this Leg Press, please follow these assembly steps in the correct order. Before proceeding, find your
new Leg Press’ serial number located on the back of the base tube (1b), and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new Leg Press.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Leg Press to
prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before
completely tightening any ONE screw.
Assembly
Guide
ST250
LEG PRESS
3
5
STEP
3
STEP
2
STEP
4
STEP
6
STEP
7
STEP
8
STEP
1
STEP
4
19mm Wrench
6mm L-Shaped Wrench (2)
TOOLS & PARTS INCLUDED
PARTS BOX
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
10mm/17mm Wrench
4mm L-Shaped Wrench
5
ORANGE BAG
BLUE BAG
HARDWARE INCLUDED
M10 x 1.5P Nut
Quantity: 12
10.5 x 18 x 2T
Flat Washer
Quantity: 16
M10 x 1.5P x 60L
Carriage Bolt
Quantity: 2
SW10.2 x 18.4 x 2.5T
Spring Washer
Quantity: 8
M10 x 1.5P x 100L Bolt
Quantity: 4
M10 x 1.5P Nut
Quantity: 3
M10 x 1.5P x 30L Bolt
Quantity: 8
M10 x 1.5P x 105L Bolt
Quantity: 1
Pull Pin
Quantity: 1
10.5 x 18 x 2T
Flat Washer
Quantity: 4
M10 x 1.5P x 50L
Carriage Bolt
Quantity: 2
Loading...