Visioneer 2600 User Manual
USB Scanner
Installation Guide
FOR WINDOWS
COPYRIGHT INFORMATION
Copyright ©2000 PrimaScan, Inc. All rights reserved.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered
trademark of Xerox Corporation. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998,
ZyLAB International, Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of PrimaScan, Inc. The software described is furnished
under a licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy
the software on any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another
language, for any purpose other than the licensee’s personal use and as specifically allowed in the licensing agreement, without the express written
permission of PrimaScan, Inc.
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer
Software Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws.
The customer is solely responsible for complying with all such laws and regulations.
Limited Product Warranty
If you find physical defects in the materials or the workmanship used in making the product described in this document, we will repair, or at our option,
replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12month period after the date of your original purchase of the product.
THIS IS OUR ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER REPRESENTATIONS,
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT, EXCEPT AS SET OUT
ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT’S SUITABILITY TO YOUR
NEEDS, ITS QUALITY AND ITS PERFORMANCE,
IN NO EVENT WILL WE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict
with the express requirements of applicable law.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TABLE OF CONTENTS
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
The USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the Scanner Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting the Scanner After Installing the Software . . . . . . . . . . . 5
Setting Up the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Scanning an Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting a Predefined Scanner Setting . . . . . . . . . . . . . . . . . . 13
Selecting Scan Configuration Options . . . . . . . . . . . . . . . . . . . 14
Customizing a Scanner Setting . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . 16
Selecting the Area of the Item You Want to Scan . . . . . . . . . . 17
Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
USB Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
iii
ELCOME
W
Congratulations on purchasing your USB flatbed scanner. With your
scanner, you can quickly scan paper documents and color photos to
place their electronic images on your computer.
HAT’S IN THE BOX
W
Before starting the installation, check the contents of the box to make
sure that all parts are included. If any items are missing or damaged,
contact the dealer where you purchased the scanner.
USB Scanner
Software CD
Note
: The CD includes all the software you need for installing the
scanner and scanning pages, photos, and other items.
USB S
Power supply
CANNER INSTALLATION GUIDE
1
THE USB S
CANNER
2
HE
T
Document cover
1
Document pad
2
Glass
3
Reference frame
4
USB port
5
Power jack
6
USB S
CANNER
Document cover.
1
Document pad.
2
Place items face down on the glass, aligned at the lower left corner.
Glass.
3
Reference frame.
4
centimeters appear along the border of the frame.
Universal Serial Bus (USB) port.
5
plug the other end into the computer’s USB port.
Power jack.
6
: The scanner does not have an on/off switch. Simply start a software
Note
application that supports scanning and scan from it. For more information, see
“Setting Up the Scanner” on page 7.
Close the document cover after placing items on the scanner glass.
Helps to secure the document in place on the scanner glass.
Place items face down within this frame. Markings for inches and
Plug the scanner end of the USB cable into this port,
Plug the scanner’s power supply into this jack.
3
CANNER INSTALLATION GUIDE
USB S
W
HAT YOU NEED
To use the scanner and software, you need the following:
■
IBM PC (or 100-percent compatible) Pentium or equivalent
■
Microsoft Windows 98 or Windows 2000
■
One available Universal Serial Bus (USB) port on your computer
■
32 megabytes (MB) or more of available internal memory (RAM)
■
70 MB of free hard disk space
■
A VGA or SVGA monitor. Recommended settings for your
monitor are as many colors as possible—High Color (16-bit), True
Color (24-bit or 32-bit). Set the resolution to at least 800 by 600
pixels. To set your monitor’s colors and resolution, open the
Windows Control Panel, double-click Display, and then click the
Settings tab.
■
A CD-ROM drive
NSTALLING THE SCANNER SOFTWARE
I
NSTALLING THE SCANNER SOFTWARE
I
4
Note
: You must install the scanner software
before
connecting the
scanner to your computer. Otherwise, the correct driver software for
your scanner will not be installed and it may not work properly.
To install the scanner software:
1. Start Microsoft Windows 98 or Microsoft 2000 and make sure that
no other applications are running.
2. Insert the CD into your computer’s CD-ROM drive. The CD
automatically starts.
: If the CD does not automatically start, make sure the CD drive’s
Note
door is completely shut. If the CD still doesn’t start, click the Windows
icon that shows the drives on your computer. (Usually, the icon is
named My Computer.) The window shows the drives available on your
computer. Double-click the icon for your CD-ROM drive to see the list
of files on the CD. Double-click the file named START32.EXE. The
CD starts.
3. Follow the instructions on the screen to install the scanner software on your computer.
When you are finished installing the software, a message on the
screen instructs you to connect the scanner to the computer.
4. Do not remove the CD from the computer yet. Later, after Windows
98 or Windows 2000 finds the scanner, you can install the other
applications on the CD.
Loading...