Visioneer®
OneTouch® 7600 Series
for USB and Parallel
Installation Guide
C O P Y R I G H T I N F O R M A T I O N
PaperPort 5.3 Software for Windows. Copyright ©1998 Visioneer, Inc. All rights reserved.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
AnyPort, AutoFix, AutoLaunch, Visioneer® FormTyper, MicroChrome, PaperEnable, PaperLaunch, PaperPort, PaperPort Deluxe, PaperPort ix, PaperPort Links, PaperPort mx, PaperPort OneTouch, PaperPort OneTouch 7600 USB, PaperPort OneTouch 7600 Parallel, PaperPort PowerBar,
PaperPort vx, PaperPortation, PaperPort Strobe, PaperPort 3000, PaperPort 3100, PaperPort 3100B, PaperPort 3100 USB, PaperPort 6000, PaperPort 6000A, PaperPort 6000B, PaperPort 6100, ScanDirect, SimpleSearch, SharpPage, Visioneer Pro OCR 100, and Visioneer are trademarks of Visioneer, Inc. PaperPort, Visioneer® Visual Explorer, and the Visioneer logo are registered trademarks of Visioneer, Inc.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered trademark of Xerox Corporation. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International, Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer, Inc. The software described is furnished under a licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any purpose other than the licensee’s personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer, Inc.
Part Number: 05-0388-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations.
Visioneer’s Limited Product Warranty
If you find physical defects in the materials or the workmanship used in making the product described in this document, Visioneer will repair, or at its option, replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12-month period after the date of your original purchase of the product.
THIS IS VISIONEER’S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT, EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT’S SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE,
IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the express requirements of applicable law.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TABLE OF CONTENTS |
iii |
T A B L E O F C O N T E N T S
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Please Use the Proper Section of This Manual . . . . . . . . . . . . . . . . . . 1
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Part 1: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the 7600 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting the PaperPort Software User’s Guide . . . . . . . . . . . . . . . . . . 2 The OneTouch 7600 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 STEP 1: Installing the PaperPort Software . . . . . . . . . . . . . . . . . . . . . 4 STEP 2: Connecting the Scanner to the Computer . . . . . . . . . . . . . . 6
Installing the 7600 Parallel Scanner . . . . . . . . . . . . . . . . . . . . . . . . 8 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting the PaperPort Software User’s Guide . . . . . . . . . . . . . . . . . . 8 The OneTouch 7600 Parallel Scanner . . . . . . . . . . . . . . . . . . . . . . . . 9 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STEP 1: Connecting the Scanner to the Computer . . . . . . . . . . . . . 10 STEP 2: Installing the PaperPort Software . . . . . . . . . . . . . . . . . . . . 13 Checking It Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
If the Scanner Is Not Properly Connected . . . . . . . . . . . . . . . . . 15
Part 2: Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Three Ways to Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Scanning By Pressing the OneTouch Buttons . . . . . . . . . . . . . . . . . 18 Scanning from the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 About the OneTouch Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
iv TABLE OF CONTENTS
Changing the Button Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Getting Help with the Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting Scan Settings and Page Settings . . . . . . . . . . . . . . . . . 24
Scanning from the PaperPort Software . . . . . . . . . . . . . . . . . . . . . . 28
Scanning an Item with the Twain Button . . . . . . . . . . . . . . . . . 29
The Predefined Scan Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . 34
Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Visioneer OneTouch 7600 Scanner Specifications . . . . . . . . . . . . . . 36
WELCOME
Congratulations on purchasing your Visioneer OneTouch 7600 flatbed scanner. With your scanner, you can quickly scan paper documents and color photos to place their electronic images on your computer.
PLEASE USE THE PROPER SECTION OF THIS MANUAL
This manual contains installation instructions for both models of the OneTouch 7600 scanner—the 7600 USB scanner and the 7600 Parallel scanner. Please make sure that you refer to the proper set of instructions for your scanner model.
WHAT’S IN THE BOX
Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.
USB cable |
|
|
(7600 USB |
Parallel cable |
|
scanner only) |
||
(7600 Parallel |
||
|
||
|
scanner only) |
Visioneer OneTouch 7600 Scanner
Software CD |
Installation Guide |
Power supply |
ONETOUCH 7600 SCANNER INSTALLATION GUIDE |
1 |
2 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE
Part 1: Installation
INSTALLING THE 7600 USB SCANNER
This section of the manual contains instructions for the OneTouch 7600 USB. Please see “Installing the 7600 Parallel Scanner” on page 8 if you’re using a OneTouch 7600 Parallel.
WHAT YOU NEED
To use the 7600 USB scanner and software, you need the following:
•IBM PC (or 100-percent compatible) Pentium or equivalent
•Microsoft Windows 98
•One available Universal Serial Bus (USB) port on your computer
•16 megabytes (MB) or more of available internal memory (RAM)
•35 MB of free hard disk space
•A VGA or SVGA monitor. Recommended settings for your monitor are as many colors as possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels. To set your monitor’s colors and resolution, open the Windows Control Panel, double-click Display, and then click the Settings tab.
•A CD-ROM drive
GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The CD also includes your PaperPort User’s Guide. This guide provides more detailed information about the PaperPort software’s features. Please see the CD to view or print the guide. The guide is also available at Visioneer’s web site at www.visioneer.com.
THE ONETOUCH 7600 USB SCANNER |
3 |
THE ONETOUCH 7600 USB SCANNER
1
2
3
4
5
Document cover
Document pad
Glass
Reference frame
Five-Button panel
6 |
USB port |
7 |
Power jack |
1Document cover. Close the document cover after placing items on the scanner glass.
2Document pad. Helps to secure the document in place on the scanner glass.
3Glass. Place items face down on top of the glass, in the upper left corner.
4Reference frame. Place items face down within this frame. Both inches and centimeter markings appear along the border of the frame.
5Five-Button panel. Press a OneTouch button to scan, print/copy, fax, convert items to text, or scan and open PaperPort-supported applications on your computer.
6Universal Serial Bus (USB) port. Plug one end of the USB cable into this port, plug the other end into the computer’s USB port.
7 Power jack. Plug the scanner power cord into this jack.
Note: The scanner does not have an on/off switch. The power is on as soon as you start your computer.
4 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE
GETTING HELP
The PaperPort software includes a complete set of help topics that answer questions about the scanner and its software.
To get help while using the PaperPort software:
•Press the F1 key, or from the Help menu, choose PaperPort Help Topics to display the Help Topics window.
Tip: If you don’t find the answers in the help or User’s Guide, see the technical support card that you received with your scanner.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE
Note: You must install the PaperPort software before you connect the Visioneer OneTouch 7600 USB scanner to the computer. Otherwise the correct program to run your scanner will not be installed and it may not scan properly.
The PaperPort CD includes all the PaperPort software files.
The CD also includes the PaperPort User’s Guide, the manual for the PaperPort software. You can read the guide while the CD is running, or print a copy directly from the CD to your printer.
To install the PaperPort software:
1.Start Microsoft Windows 98 and make sure that no other applications are running.
2.Insert the PaperPort CD into your computer’s CD-ROM drive. The CD automatically starts.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE |
5 |
Note: If the PaperPort CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, the autorun option on your computer is turned off. Click the Windows 98 icon that shows the drives on your computer. (Usually, the icon is named My Computer.) The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the file named START32.EXE. The CD starts.
3.Follow the instructions on the screen to install the PaperPort software on your computer. Later, after the scanner is working, you can install the other applications provided on the CD.
4.During installation, a message will tell you to connect the scanner to the computer.
5.Follow the steps in the next section to connect the scanner. When you’re finished, click OK in the dialog box above.
6 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE
STEP 2: CONNECTING THE SCANNER TO THE COMPUTER
The Visioneer OneTouch 7600 USB scanner connects to any available
USB port. Check your computer’s manual for its USB port locations.
Note: You do not have to shut off the power to your computer when connecting the Visioneer 7600 USB scanner.
To connect the Visioneer 7600 USB scanner:
1.Plug one end of the USB cable into an available USB port.
Some newer computers also have keyboards with USB ports. You can plug the 7600 USB scanner into the keyboard instead of the USB port on the computer.
2.Plug the other end of the USB cable into the USB port on the back of the scanner.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.
3.Plug the power adapter cable into the jack on the scanner.
4.Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power cord |
USB Cable |
|
|
|
|
|
|
|
|||||
A dialog box appears saying the USB scanner has been found.
STEP 2: CONNECTING THE SCANNER TO THE COMPUTER |
7 |
When you plug the scanner’s power adapter into a wall outlet an amber light on the front of the scanner comes on indicating that the scanner is receiving power. The light remains amber until the scanner and computer are communicating properly. Then the light turns green.
That completes the steps to connect your scanner to the computer.
5.When the software installation is finished, remove the CD from the computer and store it in a safe place.
6.Please turn to “Checking It Out” on page 14 to continue setting up your Visioneer OneTouch 7600 USB scanner.
Note: The scanning lamp under the scanner’s glass remains lit so you don’t have to wait for it to warm up each time you want to scan. This is normal even after the computer is turned off. To conserve electricity and prolong the life of the scanner, the lamp automatically powers down after a period of non-use.
8 VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE
INSTALLING THE 7600 PARALLEL SCANNER
This section of the manual contains instructions for the Visioneer
OneTouch 7600 Parallel scanner.
WHAT YOU NEED
To use the 7600 Parallel scanner and software, you need the following:
•IBM PC (or 100-percent compatible) Pentium or higher
•Microsoft Windows 95, Windows 98, or Microsoft NT 4.0
•One available parallel (LPT) port on your computer
•16 megabytes (MB) or more of available internal memory (RAM)
•35 MB of free hard disk space
•A VGA or SVGA monitor. Recommended monitor setting for color is as many colors as possible—High Color (16-bit), True Color (24-bit), or 32-bit if your monitor has that capability. Set resolution to at least 800 by 600 pixels. To set colors and resolution, open the Windows Control Panel, double-click Display, and click Settings.
•A CD-ROM drive
GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The CD also includes your PaperPort User’s Guide. This guide provides more detailed information about the PaperPort software’s features. Please see the CD to view or print the guide. The guide is also available at Visioneer’s web site at www.visioneer.com.
Loading...