Visioneer 2400P User Manual

Parallel Port Scanner

Installation Guide

FOR WINDOWS

COPYRIGHT INFORMATION

Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws .

Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered trademark of Xerox Corporation. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, Zy LAB International, Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.

Information is subject to change without notice and does not represent a commitment on the part of PrimaScan, Inc. The software described is furnished under a licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any purpose other than the licensee’s personal use and as specifically allowed in the licensing agreement, without the express written permission of PrimaScan, Inc.

Restricted Rights Legend

Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause 52.227-FAR14. Materi al scanned by this product may be protected by governmental l aws and other regulation s, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations.

Limited Product Warranty

If you find physical defects in the materials or the workmanship used in making the product described in this document, we will repair, or at our option, replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12-month period after the date of your original purchase of the product.

THIS IS OUR ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT, EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE AS SUMING THE ENTIRE RISK AS TO THE PRODUCT’S SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE,

IN NO EVENT WILL WE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the express requirements of applicable law.

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour aged to try and correct the interferen ce by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/T V technician for help.

This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cabl es must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device ma y not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

The Parallel Port Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connecting the Scanner to the Computer . . . . . . . . . . . . . . . . . . . . . 4

Installing the Scanner Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Setting Up the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Scanning an Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Selecting a Predefined Scanner Setting . . . . . . . . . . . . . . . . . . . 13

Selecting Scan Configuration Options . . . . . . . . . . . . . . . . . . . . 14

Customizing a Scanner Setting . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . . 16

Selecting the Area of the Item You Want to Scan . . . . . . . . . . . 17

Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Parallel Port Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 19

ELCOME

Congratulations on purchasing the parallel port, flatbed scanner. With your scanner, you can quickly scan paper documents and color photos to place their electronic images on your computer.

HAT’S IN THE BOX

Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.

Parallel Port Scanner

Software CD Power supply Parallel cable

Note: The CD includes all the software you need for installing the scanner and scanning pages, photos, and other items.

ARALLEL PORT SCANNER INSTALLATION GUIDE 1

THE PARALLEL PORT SCANNER 2

THE P

Document cover

Document pad

Glass

Reference frame

Printer port

Host port

Power jack

ARALLEL PORT SCANNER

Document cover. Close the document cover after placing items on the scanner glass.

Document pad. Helps to secure the document in place on the scanner glass.

Glass. Place items face down on the glass, aligned at the lower left corner.

Reference frame. Place items face down within this frame. Markings for inches and

centimeters appear along the border of the frame.

Printer port. Plug your printer cable into this port.

Host port. Plug the parallel cable that connects the scanner to the computer into this

port.

Power jack. Plug the scanner’s power supply into this jack.

Note: The scanner does not have an on/off switch. Simply start a software application that supports scanning and scan from it. For more information, see “Setting Up the Scanner” on page 7.

3 PARALLEL POR T SCANNER INST ALL ATION GUID E

HAT YOU NEED

To use the scanner and software, you need the following:

IBM PC (or 100-percent compatible) Pentium or equivalent

■

Microsoft Windows 98 or Windows 2000

■

One available parallel (LPT) port on your computer

■

32 megabytes (MB) or more of available internal memory (RAM)

■

70 MB of free hard disk space

■

A VGA or SVGA monitor. Recommended settings for your monitor

■

are as many colors as possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels. To set your monitor’s colors and resolution, open the Windows Control Panel, double-click Display, and then click the Settings tab.

A CD-ROM drive

■

CONNECTING THE SCANNER TO THE COMPUTER 4

ONNECTING THE SCANNER TO THE COMPUTER

Your parallel port scanner connects to any available parallel (LPT) port. Check your computer’s manual for the parallel port locations.

Note: Please follow the sequence of steps in this section. Do not connect the power cable until all other connections are complete.

To connect the parallel port scanner:

1. Save any open files, then shut down the power to your computer.

2. If a printer cable is attached to your computer’s parallel port,

unplug the cable from the computer. If you don’t have a printer attached to your computer, skip this step.

3. Plug one end of the scanner’s parallel cable into the port on the

back of the scanner marked “Host.”

+ 15 hidden pages