Page 1
www.vishay.com
DO-214AC (SMA)
Surface Mount Schottky Barrier Rectifier
PRIMARY CHARACTERISTICS
I
F(AV)
V
RRM
I
FSM
V
F
T
max. 150 °C
J
Package DO-214AC (SMA)
Diode variations Single
20 V, 30 V, 40 V, 50 V, 60 V
1.0 A
40 A
0.50 V, 0.75 V
SS12, SS13, SS14, SS15, SS16
Vishay General Semiconductor
FEATURES
• Low profile package
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications.
MECHANICAL DATA
Case: DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL SS12 SS13 SS14 SS15 SS16 UNIT
Device marking code S2 S3 S4 S5 S6 V
Maximum repetitive peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current at T
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
Voltage rate of change (rated V
Operating junction temperature range T
Storage temperature range T
Revision: 04-Aug-15
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
RRM
RMS
DC
(fig. 1) I
L
) dV/dt 10 000 V/μs
R
For technical questions within your region: DiodesAmericas@vishay.com
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F(AV)
I
FSM
STG
J
1
20 30 40 50 60 V
14 21 28 35 42 V
20 30 40 50 60 V
1.0 A
40 A
-65 to +150 °C
-65 to +150 °C
Document Number: 88746
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Page 2
SS12, SS13, SS14, SS15, SS16
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL SS12 SS13 SS14 SS15 SS16 UNIT
Maximum instantaneous forward
(1)
voltage
Maximum DC reverse current at
rated DC blocking voltage
(1)
1.0 A V
TA = 25 °C
= 100 °C 6.0 5.0
T
A
F
I
R
Note
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL SS12 SS13 SS14 SS15 SS16 UNIT
R
Typical thermal resistance
(1)
JA
R
JL
Note
(1)
PCB mounted with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
SS14-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel
SS14-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel
SS14HE3_A/H
SS14HE3_A/I
Note
(1)
AEC-Q101 qualified
(1)
(1)
0.064 H 1800 7" diameter plastic tape and reel
0.064 I 7500 13" diameter plastic tape and reel
Vishay General Semiconductor
0.50 0.75 V
0.2
88
28
°C/W
mA
RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted)
1.0
0.5
PCB Mounted on 0.2" x 0.2"
(5.0 mm x 5.0 mm) Copper Pad
SS12 thru SS16
0
Average Forward Rectied Current (A)
0255075100125150
Area
Lead Temperature (°C)
Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
50
40
30
20
10
Peak Forward Surge Current (A)
0
1
Number of Cycles at 60 Hz
At Rated T
8.3 ms Single Half Sine-Wave
L
10
100
Revision: 04-Aug-15
For technical questions within your region: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
2
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 88746
Page 3
www.vishay.com
SS12, SS13, SS14, SS15, SS16
Vishay General Semiconductor
100
10
TJ= 150 °C
1
0.1
Instantaneous Forward Current (A)
0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
PulseWidth = 300 ˩s
1% Duty Cycle
TJ= 25 °C
SS12 thru SS14
SS15 and SS16
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Instantaneous Reverse Current (mA)
0.001
100
10
1
0.1
0.01
SS12 thru SS14
SS15 and SS16
TJ= 125 °C
TJ= 75 °C
0 20406080100
TJ= 150 °C
TJ= 25 ° C
Percent of Rated Peak Reverse Voltage (%)
1000
100
Junction Capacitance (pF)
10
0.1
TJ = 25 °C
f = 1.0 MHz
= 50 mV
V
sig
SS12 thru SS14
SS15 and SS16
1
10
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance
p-p
100
Fig. 4 - Typical Reverse Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0.208 (5.28)
0.194 (4.93)
0 (0)
Revision: 04-Aug-15
For technical questions within your region: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.110 (2.79)
0.100 (2.54)
0.012 (0.305)
0.006 (0.152)
3
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Mounting Pad Layout
0.066 (1.68)
MIN.
0.060 (1.52)
MIN.
0.208 (5.28)
REF.
0.074 (1.88)
MAX.
Document Number: 88746
Page 4
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Loading...