Vishay 400CNQ045PBF Data Sheet

TO-2 44

PRODUCT SUMMARY

I

F(AV)

V

R

Vishay High Power Products

Schottky Rectifier, 400 A

FEATURES

• 150 °C TJ operation

Lug
terminal
anode 1

Base common

400 A

45 V

cathode

Lug
terminal
anode 2

• Center tap module

• Very low forward voltage drop

• High frequency operation

• Guard ring for enhanced ruggedness and long term
reliability

• Lead (Pb)-free

• Designed and qualified for industrial level

DESCRIPTION

The 400CNQ... center tap, high current, Schottky rectifier
module series has been optimized for very low forward
voltage drop, with moderate leakage. The proprietary barrier
technology allows for reliable operation up to 150 °C junction
temperature. Typical applications are in switching power
supplies, converters, freewheeling diodes, welding, and
reverse battery protection.

400CNQ045PbF

MAJOR RATINGS AND CHARACTERISTICS

SYMBOL CHARACTERISTICS VALUES UNITS

I

F(AV)

V

RRM

I

FSM

V

F

T

J

Rectangular waveform 400 A

45 V

tp = 5 µs sine 29 000 A

200 Apk, TJ = 125 °C (per leg) 0.52 V

Range - 55 to 150 °C

VOLTAGE RATINGS

PARAMETER SYMBOL 400CNQ045PbF UNITS

Maximum DC reverse voltage V

Maximum working peak reverse voltage V

R

RWM

45 V

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average forward
current
See fig. 5

Maximum peak one cycle non-repetitive
surge current per leg
See fig. 7

Non-repetitive avalanche energy per leg E

Repetitive avalanche current per leg I

per leg

per device 400

I

F(AV)

I

FSM

AR

50 % duty cycle at TC = 114 °C, rectangular waveform

5 µs sine or 3 µs rect. pulse

10 ms sine or 6 ms rect. pulse 3400

TJ = 25 °C, IAS = 19 A, L = 1 mH 180 mJ

AS

Current decaying linearly to zero in 1 µs
Frequency limited by T

maximum VA = 1.5 x VR typical

J

Following any rated load
condition and with rated
V

applied

RRM

200

A

29 000

40 A

Document Number: 94204 For technical questions, contact: [e-mail]
Revision: 29-Apr-08 1

www.vishay.com

400CNQ045PbF

Vishay High Power Products

Schottky Rectifier, 400 A

ELECTRICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

200 A

Maximum forward voltage drop per leg
See fig. 1

V

FM

400 A 0.73

(1)

200 A

400 A 0.7

Maximum reverse leakage current per leg
See fig. 2

I

RM

Threshold voltage V

Forward slope resistance r

Maximum junction capacitance per leg C

Typical series inductance per leg L

F(TO)

TJ = 25 °C

(1)

T

= 125 °C 1.2 A

J

TJ = TJ maximum

t

VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 10 300 pF

T

From top of terminal hole to mounting plane 5.0 nH

S

Maximum voltage rate of change dV/dt Rated V

T

= 25 °C

J

= 125 °C

T

J

V

= Rated V

R

R

R

0.57

0.52

20 mA

0.32 V

0.81 mΩ

10 000 V/µs

Note

(1)

Pulse width < 300 µs, duty cycle < 2 %

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL MIN. TYP. MAX. UNITS

Maximum junction and storage temperature range T

Thermal resistance, junction to case per leg

Thermal resistance, case to heatsink R

J

R

, T

thJC

thCS

Stg

Weight

Mounting torque 35.4 (4) 53.1 (6)

Mounting torque center hole 30 (3.4) 40 (4.6)

Terminal torque 30 (3.4) - 44.2 (5)

Vertical pull - - 80

2" lever pull - - 35

- 55 - 150 °C

- - 0.19

°C/WThermal resistance, junction to case per module - - 0.095

-0.10-

-68- g

-2.4-oz.

lbf ⋅ in

(N ⋅ m)

lbf ⋅ in

V

www.vishay.com For technical questions, contact: [e-mail]

Document Number: 94204

2 Revision: 29-Apr-08

400CNQ045PbF

Schottky Rectifier, 400 A

1000

10

1

TJ = 150 °C

TJ = 125 °C

TJ = 25 °C

0.2 0.4 0.6 0.8 1.0

0

V

- Forward Voltage Drop (V)

FM

(Per Leg)

10 000

100

- Instantaneous Forward Current (A)

F

I

Fig. 1 - Maximum Forward Voltage Drop Characteristics

1.2

Vishay High Power Products

10 000

1000

100

10

- Reverse Current (mA)

R

0.1

I

0.01

TJ = 150 °C

1

0

105 15202530

V

- Reverse Voltage (V)

R

Fig. 2 - Typical Values of Reverse Current vs.

Reverse Voltage (Per Leg)

TJ = 125 °C

TJ = 100 °C

TJ = 75 °C

TJ = 50 °C

TJ = 25 °C

35

4540

TJ = 25 °C

- Junction Capacitance (pF)

T

C

1000

0

10 20 30

V

- Reverse Voltage (V)

R

40

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)

10

1

D = 0.75
D = 0.50

0.1

Single pulse

- Thermal Impedance (°C/W)

thJC

Z

0.01

0.00001 0.0001 0.001 0.01 0.1 1

(thermal resistance)

D = 0.33
D = 0.25
D = 0.20

Notes:

1. Duty factor D = t

2. Peak TJ = PDM x Z

t1 - Rectangular Pulse Duration (s)

Fig. 4 - Maximum Thermal Impedance Z

Characteristics (Per Leg)

thJC

50

P

DM

t

1

t

2

1/t2

+ T

thJC

C

10

Document Number: 94204 For technical questions, contact: [e-mail]

www.vishay.com

Revision: 29-Apr-08 3

400CNQ045PbF

Vishay High Power Products

160

150

140

130

120

110

100

Allowable Case Temperature (°C)

Square wave (D = 0.50)
80 % rated V

See note (1)

90

80

0

I

F(AV)

applied

R

10050 150 200 250

- Average Forward Current (A)

Fig. 5 - Maximum Allowable Case Temperature vs.

Average Forward Current (Per Leg)

DC

100 000

Schottky Rectifier, 400 A

200

180

160

140

120

100

Average Power Loss (W)

300

Fig. 6 - Forward Power Loss Characteristics (Per Leg)

At any rated load condition
and with rated V
following surge

RRM

applied

D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75

RMS limit

80

60

40

20

0

I

- Average Forward Current (A)

F(AV)

DC

20050 100 150 250 3000

10 000

- Non-Repetitive Surge Current (A)

1000

FSM

I

10

tp - Square Wave Pulse Duration (µs)

Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)

D.U.T.

Current
monitor

IRFP460

= 25 Ω

R

g

Fig. 8 - Unclamped Inductive Test Circuit

100 1000

L

High-speed

switch

Freewheel

diode

40HFL40S02

10 000

V

+

= 25 V

d

Note

(1)

Formula used: TC = TJ - (Pd + Pd
Pd = Forward power loss = I
Pd

= Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated V

REV

F(AV)

) x R

REV

x VFM at (I

thJC

;

F(AV)

/D) (see fig. 6);

R

www.vishay.com For technical questions, contact: [e-mail]

Document Number: 94204

4 Revision: 29-Apr-08

400CNQ045PbF

ORDERING INFORMATION TABLE

Device code

40 0 C N Q 045 PbF

- Average current rating (x 10)

1

- Product silicon identification

2

- C = Circuit configuration

3

- N = Not isolated

4

- Q = Schottky rectifier diode

5

6 - Voltage rating (045 = 45 V)

7 - Lead (Pb)-free

Schottky Rectifier, 400 A

51324

Vishay High Power Products

67

LINKS TO RELATED DOCUMENTS

Dimensions http://www.vishay.com/doc?95021

Document Number: 94204 For technical questions, contact: [e-mail]
Revision: 29-Apr-08 5

www.vishay.com

DIMENSIONS in millimeters (inches)

3

2

3

1

Ø 5.2 (Ø 0.20)

9.6 (0.37) MIN.

93 (3.66) MAX.

¼" - 20 UNC

80 (3.15)

13 (0.51)

35 (1.37) REF.

7 (0.27)
6 (0.23)

17.5 (0.69)

16.5 (0.65)

21 (0.82)
20 (0.78)

Ø 7.2 (Ø 0.28)

(2 places)

12.6 (0.5)

Outline Dimensions

Vishay Semiconductors

TO-244

Document Number: 95021 For technical questions, contact: [e-mail]
Revision: 25-Jun-07 1

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1