Viking VBCV6638, VBCV3638, VCIH3608SS, VCIH4208SS, VCIH5408SS Installation Instructions Manual

...

F20470G EN

(033111)

Viking Installation Guide

Professional Hoods

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Table of Contents

IMPORTANT–Please Read and Follow!

NOTE:

If installing hood with warming shelf panel,

install warming shelf panel first.

IMPORTANT – PLEASE READ AND FOLLOW

• Before beginning, please read these instructions completely and carefully.

• Do not remove permanently affixed labels, war nings, or plates from the product. This may void the warranty.

• Please observe all local and national codes and ordinances. If no local codes are applicable, wire in accordance with the National Electrical Code, ANSI/NFPA 70-latest edition.

• Damp environment approved models should be installed in a covered non-enclosed area and should be protected from the elements as much as possible.

• The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future reference.

• Check with a qualified and trained installer or local codes for makeup air requirement, if any.

This hood is for residential installation only and is not designed for installation over a commercial product. Make sure power is off at the main circuit breaker or fuse box before making connections. To avoid risk of fire, electric shock, or injury to persons, turn off the electricity to the hood from the power supply before servicing or cleaning. Viking hoods are equipped with variable speed control blowers. These units will not function with a single speed ventilator. All Viking Range ventilator kits are designed specifically for use with Viking Range hoods. Use of any non-Viking Range ventilator kit will void the hood warranty.

Viking hoods are equipped with the variable speed controls for blowers. These units will not function with a single speed ventilator. All Viking ventilator kits are designed specifically for use with Viking hoods. Use of any non-Viking ventilator kit will void the hood warranty.

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

2. Sufficient air is needed for proper combustion and exhausting of gases through the flute (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

3. When cutting of drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

4. Ducted fans must alwaysbe ventedto theoutdoors.

5. WARNING!: To reduce risk of fire, use only metal ductwork

6. CAUTION!: To reduce risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceilings, or into attics, crawl spaces, or garages.

7. CAUTION!: To Reduce the Risk of Fire and Electric Shock, Install this rangehood only with remote blower models manufactured by Viking, model numbers – DEV900/DEV1200, VEV900/VEV1200, OR DEV1500, VEV1500 or integral blowers manufactured by Viking, model numbers – DIV300, DIV440, DIV600, DIV800, DIV1200, VIV300, VIV600, or VIV1200. NOTE – Please refer inside for specific canopy/blower combinations.

W A R N I N G

To reduce the risk of fire, electric shock, or injury to persons, observe the following:

• Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

• Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Warnings & Important Information

________________________________________________________ 3-

VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”

Dimensions & Specifications _____________________________________________________ 5 Clearance Dimensions ___________________________________________________________ 6 Interior Ventilator Dimensions ____________________________________________________ 7

VWH 18”H. 24”/27” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”

Dimensions & Specifications ______________________________________________________ 8 Clearance Dimensions _____________________________________________________________9 Interior Ventilator Dimensions _____________________________________________________ 10 Exterior Ventilator Dimensions ___________________________________________________ 11

VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60”

Dimensions & Specifications _____________________________________________________ 12 Clearance Dimensions __________________________________________________________ 13

VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”

Dimensions & Specifications _____________________________________________________ 14 Clearance Dimensions __________________________________________________________ 15 Interior Ventilator Dimensions ___________________________________________________ 16 Exterior Ventilator Dimensions ___________________________________________________ 17

VIH Island Hoods 36”, 42”, 54”, & 66”

Dimensions & Specifications _____________________________________________________ 18 Clearance Dimensions___________________________________________________________ 19 Interior Ventilator Dimensions ___________________________________________________ 20 Exterior Ventilator Dimensions ___________________________________________________ 21

VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”

Dimensions & Specifications _____________________________________________________ 22 Clearance Dimensions___________________________________________________________ 23 Interior Ventilator Dimensions ___________________________________________________ 24 Exterior Ventilator Dimensions ___________________________________________________ 25

VBCV Wall Custom Ventilator System

Dimensions & Specifications _____________________________________________________ 26 Installing Hood Canopy _________________________________________________________ 27 Clearance Dimensions___________________________________________________________ 28 VBCV Ventilator Dimensions _____________________________________________________ 29

VICV Island Custom Ventilator System

Dimensions & Specifications _____________________________________________________ 31 Installing Hood Canopy _________________________________________________________ 32 Clearance Dimensions___________________________________________________________ 33

VICV Ventilator Dimensions ______________________________________________________ 34 Planning Information________________________________________________________________ 36 Installation Procedures

Installation (VWH 10”H. Wall Hoods w/Standard Ventilator) __________________________ 37

Duct Cover Option (VWH 10”H. Wall Hoods w/Standard Ventilator)___________________ 39

Installation (VWH 10”H. Wall Hoods w/Recirculating Kit) _____________________________39

Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods) ________________________ 42

Duct Cover Option (VWH 18”H. Wall Hoods)_______________________________________ 43

Duct Cover Option (VCWH Chimney Wall Hoods) __________________________________ 44

Installation (VIH/VCIH Island Hoods) ______________________________________________ 45 Service & Registration_______________________________________________________________ 47

IMPORTANT–Please Read and Follow!

W A R N I N G

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS

Rangehoods must be installed with the ventilators that are specified on their carton indicating suitability with this model. Other ventilators cannot be substituted.

C A U T I O N

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

W A R N I N G

To reduce the risk of injury to persons in the event of a rangetop grease fire, observe the following. (Based on “Kitchen Firesafety Tips,” published by NFPA.)

1. SMOTHER FLAMES with a close fitted lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN. You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels a violent steam explosion will result.

4. Use an extinguisher ONLY if

• You know it is a Class ABC extinguisher, and you

already know how to operate it.

• The fire is small and contained in the area where

it started.

• The fire department is being called.

• You can fight the fire with your back to an exit.

”

(

)

”

(

)

”

(

)

A (Hood width)

24”W. 23-7/8“ (60.6 cm) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm)

3”

(

)

Dimensions & Specifications

(VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”)

* Disregard when using recirculating kits. 460 CFM blower is shipped with hood.

NOTE: Optional duct cover sold separately.

VWH 10”H. Wall Hoods w/Standard Ventilator

Description 24” 30” 36”

Duct cover width

23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm)

Duct cover depth

12” (30.5 cm)

Duct cover height

12” (30.5 cm)

Number of lights

Number of filters

Heat lamps

N/A

Interior ventilator kit

460 CFM Standard

Interior duct size*

7” (17.8 cm)

Interior—Maximum amps

5.6

Clearance Dimensions

* NOTE: When installing with a 24” high-shelf, the 27” (68.6 cm) max. dimensions must be used.

4”

1. 0

7”

8. 6

60”m

in.

)

63”m

ax.

)

”

(91

Interior Ventilator Dimensions

18”

(4.6 cm)

3-7/8”

(9.8 cm)

3-4”

(1.9 cm)

7” (17.8 cm) dia. duct location

Electrical hookup

1/2”

(1.3 cm)

4”

(10.2 cm)

3-1/2”

(8.9 cm)

24”W. 23-7/8” (60.6 cm) 30”W. 29-7/8” (75.9 cm) 36”W. 35-7/8” (91.1 cm)

24”W. 5-1/4” (13.3 cm) 30”W. 8-1/4” (20.9 cm) 36”W. 11-1/4” (28.6 cm)

24”W. 11-15/16” (30.3 cm) 30”W. 14-15/16” (37.9 cm) 36”W. 17-15/16” (45.6 cm)

24”W. 5/8” (1.6 cm) 30”W. 3-5/8” (9.2 cm) 36”W. 6-5/8” (16.8 cm)

460 CFM Interior Ventilator Installation

Top View

(VWH 10”H. Wall Hoods w/Standard Ventilator)

Dimensions & Specifications

8”

”

(

6”

(

cm)

A (Hood width)

24”W. 23-7/8“ (60.6 cm) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48“W. 47-7/8” (121.6 cm) 54”W. 53-7/8” (136.8 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm)

B (Hood depth)

24”D. 24” (61.0 cm) 27”D. 27” (68.6 cm)

(VWH 18”H. 24” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”) (VWH 18”H. 27” Deep Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”)

* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.

Max duct run is 50 ft.

** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.

NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.

”

(

)

”

(

)

”

(

)

”

(

)

”

(

)

Clearance Dimensions

(VWH 18”H. Wall Hoods)

NOTE: Optional duct cover sold separately.

VWH 18”H. Wall Hoods

Description 24” 30” 36” 42” 48” 54” 60” 66”

Duct cover width

23-7/8”

(60.6 cm)

29-7/8”

(75.9 cm)

35-7/8”

(91.1 cm)

41-7/8”

(106.4 cm)

47-7/8”

(121.6 cm)

53-7/8”

(136.8 cm)

59-7/8”

(152.1 cm)

65-7/8”

(167.3 cm)

Duct cover depth

12” (30.5 cm)

Duct cover height

12” (30.5 cm)

Number of lights

2 2 2 2 3 3 4 4

Number of filters

2 2 2 2 3 3 4 4

Heat lamps

1 1 1 1 2 2 2 2

Interior ventilator kits

VINV300/

600

VINV300/ 600/1200

VINV600/

1200

VINV1200* VINV1200* VINV1200* VINV1200*

Exterior ventilator kits

DEV900/

1200*

DEV900/

1200*

DEV900/

1200*

DEV900/

1200*

DEV1200*/

1500**

DEV1200*/

1500**

DEV1200*/

1500**

DEV1200*/

1500**

In-line ventilator kits

DIL900/1200 DIL900/1200 DIL900/1200 DIL900/1200 DIL1200 DIL1200 DIL1200 DIL1200

Interior duct size

7”

(17.8 cm)

7”/10”

(17.8/25.4 cm)

7”/10”

(17.8/25.4 cm)

7”/10”

(17.8/25.4 cm)

10”

(25.4 cm)

10”

(25.4 cm)

10”

(25.4 cm)

10”

(25.4 cm)

Exterior duct size

10” (25.4 cm)

Interior—Maximum amps

4.9/5.9 4.9/5.9 4.9/5.9 11.5 11.5 11.5 11.5 11.5

Exterior—Maximum amps

8.7/6.0 8.7/6.0 8.7/6.0 8.7/6.0 8.5/9.2 8.5/9.2 8.9/9.2 8.9/9.2

In-Line—Maximum amps

6.0/7.9 6.0/7.9 6.0/7.9 6.0/7.9 10.3 10.3 10.7 10.7

Exterior Ventilator Dimensions

Interior Ventilator Dimensions

10” (25.4 cm) dia. duct location

24”W. 11-15/16” (30.3 cm) 30”W. 14-15/16” (37.9 cm) 36”W. 17-15/16” (45.6 cm) 42”W. 20-15/16” (53.2 cm) 48”W. 23-15/16” (60.8 cm) 54”W. 26-15/16” (68.4 cm) 60”W. 29-15/16” (76.0 cm) 66”W. 32-15/16” (83.7 cm)

120

18-1/2”

(50.0 cm)

5-1/2”

(14.0 cm)

9-1/4”

(23.5 cm)

9-1/2”

(24.1 cm)

9-3/8”

(23.8 cm)

8-3/8”

(21.3 cm)

5/8”

(1.6 cm)

24”W. 23-7/8” (60.6 cm) 30”W. 29-7/8” (75.9 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48”W. 47-7/8” (121.6 cm) 54”W. 53-7/8” (136.8 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm)

7”(17.8 cm) dia. duct location

4-5/8”

(11.7 cm)

5/8”

(1.6 cm)

18-3/4”

(47.6 cm)

9-1/8”

(23.2 cm)

24”W. 11-15/16” (30.3 cm) 3

0”W. 14-15/16” (37.9 cm) 36”W. 17-15/16” (45.6 cm) 42”W. 20-15/16” (53.2 cm) 48”W. 23-15/16” (60.8 cm) 54”W. 26-15/16” (68.4 cm) 60”W. 29-15/16” (76.0 cm) 66”W. 32-15/16” (83.7 cm)

9-3/8”

(23.8 cm)

9-5/8”

(

24.4 cm)

120

10” (25.4 cm) dia. duct location

A 5-15/16” (15.1 cm)

9-3/4”

(24.8 cm)

2-1/2”

(6.35 cm)

6-5/8”

(16.8 cm)

3” (7.62 cm)

8-3/16” (20.7 cm)

120

10” (25.4 cm) dia. duct location

2-1/2”

(6.35 cm)

5-15/16”

(15.1 cm)

1-1/16” (2.7 cm)

-7/16”

(16.4 cm)

3” (7.62 cm)

8-1/4”

(

20.9 cm)

20 V

9-3/4”

(24.8 cm)

900 or 1200 CFM Exterior Ventilator Installation for all Wall Hoods

1200 or 1500 CFM Exterior Ventilator Installation for all Wall Hoods

300 or 600 CFM Interior Ventilator Installation for all Wall Hoods

1200 CFM Interior Ventilator Installation for all Wall Hoods

Top View

(VWH 18”H. Wall Hoods) (VWH 18”H. Wall Hoods)

1312

Dimensions & Specifications

”

(

)

”

(

)

”

(

)

”

(

)

A (Hood width)

36”W. 35-7/8” (91.1 cm) 48“W. 47-7/8” (121.6 cm) 60”W. 59-7/8” (152.1 cm)

Seal joints with silicone.

Provided on “T” Series only.

(VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60”)

* A 1,200 CFM interior- or exterior-power ventilator should be used with all T-Seriesmodels and when indoor models are

installed over range/rangetop with gas char-grill. Max duct run is 50 ft.

** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.

NOTE: Optional duct cover sold separately.

”

(

”

(

”

(

”

(

)

”

(

)

”

(

“

”

(

cm)

”

(

)

Clearance Dimensions

(VWH 18”H. T-Series Wall Hoods)

Note: T-Series Models must be installed in a covered, non-enclosed area, and should be protected from the elements as much as possible.

The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood should be installed 4-1/2” (11.4 cm) plus the distance between the back trim and surface from the back wall. (Note: There is a 3” minimum clearance from the back trim to non-combustible surfaces, and a 24” minimum to combustible surfaces.) This will require building the hood out from the wall. Any combustible material used for this purpose must be covered with locally-supplied stainless steel. Viking also recommends using a backsplash.

VWH 18”H. T-Series Wall Hoods

Description 36” 48” 60”

Duct cover width

35-7/8” (91.1 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm)

Duct cover depth

12” (30.5 cm)

Duct cover height

12” (30.5 cm)

Number of lights

2 3 4

Number of filters

2 3 4

Interior ventilator kits

VINV1200* VINV1200* VINV1200*

Exterior ventilator kits

DEV1200*/1500** DEV1200*/1500** DEV1200*/1500**

In-line ventilator kits

DIL1200 DIL1200 DIL1200

Interior duct size

10” (25.4 cm)

Exterior duct size

10” (25.4 cm)

Interior—Maximum amps

9.0 11.4 11.8

Exterior—Maximum amps

6.1/6.8 8.4/9.1 8.8/9.5

In-Line—Maximum amps

7.9 10.2 10.6

Dimensions & Specifications

”

(61

)

”

(45

)

”

(30

)

”

(61

)

”

(15

.2 c

)

A (Duct width)

30”W. 12“ (30.5 cm) 36”W. 12“ (30.5 cm) 42”W. 12“ (30.5 cm) 48“W. 18“ (45.7 cm) 54”W. 18“ (45.7 cm) 60”W. 24“ (61.0 cm) 66”W. 24“ (61.0 cm)

B (Hood width)

30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48“W. 47-7/8” (121.6 cm) 54”W. 53-7/8” (136.8 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm)

(VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”)

* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.

Max duct run is 50 ft.

** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.

”

(

)

”

(

)

”

(

)

”

(

)

”

(

)

Clearance Dimensions

(VCWH Chimney Wall Hoods)

NOTE: Optional duct cover sold separately.

VCWH Chimney Wall Hoods

Description 30” 36” 42” 48” 54” 60” 66”

Duct cover width

12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 18” (45.7 cm) 24” (61.0 cm) 24” (61.0 cm)

Duct cover depth

12” (30.5 cm)

Duct cover height

12” (30.5 cm) to 24” (61.0 cm)

Number of lights

2 2 2 3 3 4 4

Number of filters

2 2 2 2 3 3 3

Heat lamps

1 1 1 2 2 2 2

Interior ventilator kits

VINV300/600 VINV300/600 VINV600 VINV1200* VINV1200* VINV1200* VINV1200*

Exterior ventilator kits

DEV900/

1200*

DEV900/

1200*

DEV900/

1200*

DEV1200*/

1500**

DEV1200*/

1500**

DEV1200*/

1500**

DEV1200*/

1500**

In-line ventilator kits

DIL900/1200 DIL900/1200 DIL900/1200 DIL1200 DIL1200 DIL1200 DIL1200

Interior duct size

7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm)

Exterior duct size

10” (25.4 cm)

Interior—Maximum amps

4.9/5.9 4.9/5.9 5.9 11.5 11.5 11.9 11.9

Exterior—Maximum amps

8.7/6.0 8.7/6.0 8.7/6.0 8.5/9.2 8.5/9.2 8.5/9.2 8.5/9.2

In-Line—Maximum amps

6.0/7.9 6.0/7.9 6.0/7.9 10.3 10.3 10.7 10.7

+ 16 hidden pages

Viking VBCV6638, VBCV3638, VCIH3608SS, VCIH4208SS, VCIH5408SS Installation Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual