Viking TVDDP24DB Installation
Installation Guide
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-845-4641
or visit our web site in the US at www.vikingrange.com or
in Canada at www.brigade.ca
F21043A EN
(101513)
1 & 3 Series Built-In Dishwashers
IMPORTANT2— Please Read and FollowTable of Contents
Important Safety Instructions __________________________________________________________3
Inspect the Dishwasher ___________________________________________________________5
How to Contact Us _______________________________________________________________5
Tools Which May Be Needed _________________________________________________________6
Materials Which May Be Needed ______________________________________________________7
Materials Supplied ___________________________________________________________________8
Parts Supplied ___________________________________________________________________8
Dishwasher Parts Bag 1 ___________________________________________________________8
Dishwasher Parts Bag 2 ___________________________________________________________8
Parts Attached to the Rear of the Dishwasher________________________________________8
Dishwasher Specifications ____________________________________________________________9
Technical Features _______________________________________________________________9
Enclosure Preparation _______________________________________________________________10
Electrical Preparation ____________________________________________________________10
Preparation for Installing Mounting Brackets _______________________________________10
Adjusting Height________________________________________________________________10
Installing the Side Trim Strips _____________________________________________________11
Preparing the Water Connection__________________________________________________12
Drain Preparation _______________________________________________________________13
Steam Protection Foil____________________________________________________________14
Installation_________________________________________________________________________15
Drain Hose Connection, Water Supply & Electrical Connections ______________________15
Preparation of Water Supply _____________________________________________________16
Electrical Connection ____________________________________________________________19
Readjusting Foot Levels _________________________________________________________20
Adjusting Moveable Kickplate ____________________________________________________20
Installing a Custom Panel ________________________________________________________22
Installer Checklist ___________________________________________________________________28
Final Instructions ___________________________________________________________________28
Self-Help Hints _____________________________________________________________________28
Service & Registration_______________________________________________________________29
1
Site Preparation
It is recommended that a thorough site inspection be
conducted PRIOR to unpacking and moving this appliance.
• Please read this installation manual and
particularly the safety instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dishwasher performance.
• Be sure to observe all listed warnings and
cautions. Look particularly for the icons
with exclamation marks inside. The
information icon also will provide
important references.
WARNING
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided,
may result in injury. It may also be used
to alert against unsafe practices.
NOTICE
Indicates a potentially hazardous
situation which, if not avoided,
may result in damage to the dishwasher,
the tableware, the equipment, or
the environment.
IMPORTANT4— Please Read and Follow
3
In addition to these instructions, the
dishwasher shall be installed:
• In accordance with all local codes or, in
absence of a local code,
• In the United States, with the national
Electric Code,
• In Canada, with the Canadian Electric
Code C22.1-latest edition/Provincial and
Municipal codes and/or local codes.
When installing the dishwasher, follow basic
precautions, including the following:
• The dishwasher should only be converted
from cord-connected to permanently
connected by an authorized service
representative.
• Installation and repair should be
performed by a qualified installer. Work by
unqualified persons could be dangerous
and may void the warranty.
• DO NOT operate the appliance if
damaged, malfunctioning, partially
disassembled, or if it has missing or
broken parts.
• Also follow the safety instructions of the
use and care guide.
• To reduce the risk of electric shock, fire, or
injury to persons, the installer must ensure
that the dishwasher is completely
enclosed at the time of installation.
• Only connect the dishwasher to the power
supply when all installation and plumbing
work is complete.
• If the dishwasher is installed in a location
that experiences freezing temperatures
(e.g. in a vacation home, cabin, etc.), you
must drain all the water from the
dishwasher’s interior. Water system
ruptures that occur as a result of freezing
are not covered by warranty.
• Dishwasher must be secured to adjacent
cabinetry using the brackets provided.
Failure to do this may cause damage to
property or bodily injury.
• Connect to a properly rated, protected,
and sized power supply circuit to avoid
electrical overload. The dishwasher is
designed for an electrical supply of 120V
(volts), 60Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply
conductors shall be a minimum of #16
AWG copper wire rated at 167°F (75°C) or
higher. These requirements must be met
to prevent injury and machine damage.
Consult a qualified electrician if in doubt.
• DO NOT use any extension cord or
portable outlet device to connect the
dishwasher to a power supply.
• Ensure that any plastic wrappings, bags,
small pieces, etc., are disposed of safely
and kept out of the reach of children.
Danger of suffocation!
• Remove the dishwasher door when
removing an old dishwasher from service
or discarding it. Ensure that the appliance
presents no danger to children while
being stored for disposal.
• Old appliances may contain materials that
can be recycled. Please contact your local
recycling authority about the possibility of
recycling these materials.
NOTICE
Installation should be performed by an
insured licensed plumber, contractor,
or trained installer. Installation
performed by persons other than this
could result in improper installation
and property damage.
NOTICE
WARNING
Read these installation instructions
completely before installing and follow
them carefully. Save these installation
instructions and pass them on to any
future user.
• The dishwasher drain hose must be
installed with a drain loop at least 28”
(710mm) off the cabinet floor; otherwise
the dishwasher may not drain properly.
• This dishwasher is intended for residential
use only and should not be used in
commercial establishments.
• New Installation: If the dishwasher is a
new installation, most of the work must be
done before the dishwasher is moved into
place.
• Replacement: If the dishwasher is
replacing another dishwasher, check the
existing dishwasher connections for
compatibility with the new dishwasher,
and replace parts as necessary.
IMPORTANT— Please Read and Follow
General Information
65
Tools Which May Be Needed
IMPORTANT— Please Read and Follow
• Inspect the Dishwasher: After unpacking
the dishwasher and prior to installation,
thoroughly inspect the dishwasher for
possible freight or cosmetic damage.
Report any damage immediately.
To contact us, you may either call our tollfree number at 1-888-845-4641 or contact us
via the website in the US
(www.vikingrange.com) or in Canada
(www.brigade.ca).
NOTICE
• Do not discard any bags or items that
come with the original package until
after the entire installation has been
completed.
Pipe Wrench Wire Cutter Drill
Hole Saw Hammer Wire Stripper
Tape Measure Torx Screwdriver
(T20)
Phillips Screwdriver
Adjustable Wrench Slot Screwdriver Scissors
Level Brush Pencil
87
General Information General Information
Materials Which May Be Needed
Hot Water Supply Line – Minimum 3/8” O.D. copper tubing or metal
braided dishwasher supply line.
90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit
your water supply line (copper tubing/compression fitting, or braided
hose) on the other leg.
UL listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing
connections.
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting, or braided hose).
Silicone.
Glue.
Materials Supplied
x1
x1
y.
x4
x2
x2
a.
b.
d.
e.
f.
g.
h.
c.
j.
k.
l.
o.
p.
s.
v.
n.
r.
t.
m.
x1
x1
x1
x1
x6
x1
x1
x1
x1
x1
x1
x4
x2
x2
x1
z.
x1
Dishwasher Parts Bag 1
This dishwasher bag comes with
the following parts:
a. Side Trim Strips – Left
b. Side Trim Strips – Right
c. Adjusting Wrench
d. Screws Ø 1/8”x5/8”
(Ø 3.5mmx14mm)
e. Mounting Bracket – Left
f. Mounting Bracket – Right
g. Spring Clamp
h. Screw Clamp
j. Rubber Connector
k. Kickplate Bracket – Left
l. Kickplate Bracket – Right
m. Edge Protector
n. Clips
o. Kickplate
(kickplate without slots)
p. Kickplate
r. Screws Ø 1/8”x3/8”
(Ø 3.9mmx9mm)
s. Plastic Caps
t. Screws Ø 3/16”x1/4”
(Ø 4mmx6mm)
z. Steam Protection Foil
Dishwasher Parts Bag 2
v. Screws Ø 1/8”x5/8”
(Ø 3.5mmx14mm)
y. Screws Ø 3/16”x1-3/4”
(Ø 4mmx43mm)
Parts Attached to the Rear
of the Dishwasher
a. Side Trim Strips – Left
b. Side Trim Strips – Right
o. Kickplate
(Kickplate without slots)
p. Kickplate
Parts Supplied
Parts for your dishwasher will come in
several plastic bags. Check your parts bags
to make sure you have all the parts as listed
below.
Loading...