Page 1
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
CUSTOM PANEL–REFRIGERATION
Built-In 36”W. Bottom-Mount Refrigerator/Freezer—DFBB363
35-1/4”
(89.5 cm)
23-1/16”
(58.6 c
m)
3/4”
(1.9 cm)
35-1/4”
(89.5 cm)
34-3/8” to notch
(86.6 cm)
3”
(7.6 cm)
5/8”
(1.6 cm)
51-7/8”
(131.8 cm)
51-1/4”
(130.2 cm)
3/4”
(1.9 cm)
Note: Corner notch is for left
hinge door. (Reverse for right
hi
nge)
See cutout instructions in installati
on
manual
Note: Inset shown
upside down
1-13/16”
(4.60 cm)
5/8”
5/8”
(1.6 cm)
(1.6 cm)
3”
(7.62 cm)
3/32”
(.24 cm)
5/8”
5/8”
(1.6 cm)
Note: Panel overlays must be dry, solid, straight one piece panels. The use of multiple panel pieces to achieve the dimensions is not
recommended.
Note: A 1/4” wood filler or insulation filler must be used between the door and 3/4” wood panel to prevent condensation from forming. The dimensions of the 1/4” wood filler are 1/4” smaller than the dimensions shown on the top, left and right side. At the bottom,
the 1/4” back panel should be 5/8” smaller than the dimensions shown.
Dimensions & Specifications
DFBB363
Overall panel width 35-1/4” (89.5 cm)
Overall panel height
Refrigerator front 51-7/8” (131.8 cm)
Freezer front 23-1/16” (58.6 cm)
Overall panel depth 3/4” (1.9 cm)*
Maximum panel weight
Refrigerator front 45 lbs. (20.4 kg)
Freezer front 20 lbs. (9.0 kg)
*Panel thickness must not exceed 1” (2.5 cm) on hinge side. Thicker panels will interfere with door swing and clearance.
CUSTOM PANEL DIMENSIONS
DFBB363
Page 2
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
CUSTOM PANEL–REFRIGERATION
Built-In 36”W. Bottom-Mount Refrigerator/Freezer—DFBB363
Dimensions & Specifications
CUSTOM SIDE PANEL DIMENSIONS
Note: Adding a 3/4” (1.9 cm) side panel adds an additional 3/4” (1.9 cm) to the overall width of the product for each side panel.
Requires side panel hardware kit (Kit model number – SPHKDS)
DFBB363
Overall panel width 3/4” (1.9 cm)
Overall panel height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.*
Overall panel depth 24” (61.0 cm)
*Depending on how high leveling feet are raised and cabinet enclosure height.
DFBB363
3/4”
(1.9 cm)
End panel
1”
(2.5 cm)
1/4”
(0.6 cm)
Z-Bracket
21-3/4”
(55.2 cm)
21-3/4”
(55.2 cm)
24”
(61.0 cm)
Optional kickplate notch
Dimensions determined by cabinets
24”
(61.0 cm)
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) max.*
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) max.*
Page 3
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
CUSTOM PANEL–REFRIGERATION
Built-In 36”W. Bottom-Mount Refrigerator/Freezer—DFBB363
Dimensions & Specifications
DFBB363
Overall grille width 35-1/2” (90.1 cm)
Overall grille height 3” (7.6 cm)
Overall grille depth 3-3/4” (9.5 cm)
DFBB363
Reverse dimensions
for other end.
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 c
m)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius
1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
7/8”
(2.22 cm)
1/2”
(1.27 c
m)
34”
(86.36 cm)
34”
(86
.36 cm)
3/4”
(1.90 cm)
2-1/8”
(5.4 cm)
1/2”
(1.27 cm)
3/4”
(1.90 c
m)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3-5/8”
(9.20 cm)
33-15/16”
(86.20 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
35-1/2”
(90.17 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
32-3/16”
(81.75 cm)
5-17/32”
(14.10 cm)
4-11/64”
(10.59 cm)
30-27/32”
(78.34 cm)
3 2
5/32”
(9.60 c
m)
2
7/32”
(.84 cm)
9/16”
(1.42 c
m)
1/4”
(.635
c
m)
16.5˚
20.0˚
CUSTOM GRILLE DIMENSIONS
Page 4
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
CUSTOM PANEL–REFRIGERATION
Built-In 36”W. Bottom-Mount Refrigerator/Freezer—DFBB363
DFBB363/DFBB363
Overall grille width 71-1/2” (181.6 cm)
Overall grille height 3” (7.6 cm)
Overall grille depth 3-3/4” (9.5 cm)
3 2
5/32”
(9.60 c
m)
2
7/32”
(.84 cm)
9/16”
(1.
42
c
m)
1/4”
(.6
35
c
m)
16.
5˚
20.0˚
Note: This part should be
located at the center of the
grille. If desired, two per grille
can be used by dividing the
length of the grille into thirds.
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
3/8”
(0.38 cm)
1/2”
(1.27 cm)
R 3/32”
(0.09 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
13/32”
(1.03 cm)
9/16”
(1.43 cm)
1/8”
(.32 cm)
Grille support
2-7/8”
(7.30 cm)
1”
(2.54 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius
1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.
27 c
m)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-3/
4”
(9.52 cm)
3-3/4”
(9.52 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
71-1/2”
(181.61
cm)
70”
(177.80 cm
69-15/16”
(177.64 cm)
70”
(177.80 cm)
68-3/64”
(1
72.83 cm)
66-2
7
/
32”
(1
69.78 cm)
4-11/64”
(11.27 cm)
5-17/32”
(14.04 cm)
30-2
7/32”
(78.34 cm)
32-3/16”
(81.75 cm
)
40-1
1
/
64”
(1
02.03 cm)
41-2
5/64”
(10 5.13 c
m)
2-1/8”
(5.4 cm)
DFBB363
Dimensions & Specifications
CUSTOM GRILLE DIMENSIONS – DUAL BOTTOM-MOUNT INSTALLATION
Dual 36”W. Grille
Note: Dual units can only be made in a left and right hand configuration. To use a custom 72”W. grille, you must purchase the center
trim kit FCTKSS.
Loading...