ViewSonic TD2223, TD2423 User Manual

TD2223/TD2423

Display

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”

Model No. VS18311/VS18312

P/N: TD2223/TD2423

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

Once again, thank you for choosing ViewSonic®!

2

Safety Precautions

Please read the following Safety Precautions before you start using the device.

Keep this user guide in a safe place for later reference.

Read all warnings and follow all instructions.

Sit at least 18" (45 cm) away from the device.

Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation.

Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.

Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.

Avoid exposing the device to direct sunlight or other sources of sustained heat.

Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.

Use a soft, dry cloth to clean the external housing. For more information, refer to the "Maintenance" section.

Oil may collect on the screen as you touch it. To clean the greasy spots on the screen, refer to the "Maintenance" section.

Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.

When moving the device, be careful not to drop or bump the device on anything.

Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.

Do not place any heavy objects on the device or connection cables.

If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.

Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.

3

When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.

Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.

Only use attachments/accessories specified by the manufacturer.

When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.

Disconnect the power plug from the AC outlet if the device is not being used for a long period of time.

Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:

ͫif the power supply cord or plug is damaged

ͫif liquid is spilled onto or objects fall in the unit

ͫif the unit is exposed to moisture

ͫif the unit does not operate normally or has been dropped

NOTICE: LISTENING THROUGH EAR-/HEADPHONES AT A HIGH VOLUME FOR EXTENDED PERIODS CAN CAUSE HEARING DAMAGE/HEARING LOSS. When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.

NOTICE: THE MONITOR MAY OVERHEAT AND SHUTDOWN! If the device shuts down automatically, please turn on your monitor again. After rebooting, change your monitor's resolution and refresh rate. For details, please refer to the graphics card's user guide.

NOTICE: This product is not specifically designed for 24/7 usage in any environment.

4

Contents

 

Safety Precautions.......................................................

3

Introduction.................................................................

7

Package Contents....................................................................................................

7

Product Overview....................................................................................................

8

Initial Setup.................................................................

9

Installing the Stand..................................................................................................

9

Wall Mounting......................................................................................................

10

Using the Security Slot..........................................................................................

11

Making Connections...................................................

12

Connecting to Power.............................................................................................

12

Connecting External Devices.................................................................................

13

HDMI Connection...................................................................................................

13

DVI Connection......................................................................................................

14

VGA Connection.....................................................................................................

15

USB Connection.....................................................................................................

16

Touch Function Control.........................................................................................

17

Touch Accuracy......................................................................................................

18

Audio Connection..................................................................................................

19

Using the Monitor......................................................

20

Adjusting the Viewing Angle.................................................................................

20

Tilt Angle Adjustment............................................................................................

20

Turning the Device On/Off...............................................

21

Using the Control Panel Keys................................................................................

21

On-Screen Display (OSD) Menu.............................................................................

22

Hot Keys.................................................................................................................

23

Configuring the Settings........................................................................................

25

General Operations................................................................................................

25

On-Screen Display (OSD) Menu Tree.....................................................................

27

5

Appendix...................................................................

30

Specifications........................................................................................................

30

Glossary.................................................................................................................

33

Troubleshooting....................................................................................................

38

Maintenance.........................................................................................................

40

General Precautions...............................................................................................

40

Cleaning the Screen...............................................................................................

40

Cleaning the Case...................................................................................................

40

Regulatory and Service Information...........................

41

Compliance Information.......................................................................................

41

FCC Compliance Statement....................................................................................

41

Industry Canada Statement...................................................................................

41

CE Conformity for European Countries..................................................................

41

Declaration of RoHS2 Compliance.........................................................................

42

Indian Restriction of Hazardous Substances..........................................................

43

Product Disposal at End of Product Life.................................................................

43

Copyright Information...........................................................................................

44

Customer Service...................................................................................................

45

Limited Warranty...................................................................................................

46

Mexico Limited Warranty......................................................................................

49

6

Introduction

Package Contents

Touch Display

Power cord

HDMI cable

USB 2.0 upstream cable (Type B to Type A)

Quick start guide

NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

7

ViewSonic TD2223, TD2423 User Manual

Product Overview

Front View

Display Screen

 

 

Power LED

 

1 2

▲▲

Magnetic Point

Power Button

Rear View

Security Slot

VGA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

 

 

4

5

6

7

8

1.

USB Downstream

2.

USB Upstream

3. AC IN

4. HDMI

 

5. DVI

 

6.

VGA

7.

Audio In

8. Audio Out

 

 

 

 

NOTE: For more information about the 1/2//key and its functions, refer to

“Hot Keys” on page 23.

8

Initial Setup

This section provides detailed instructions for setting up your monitor.

Installing the Stand

1.Place the monitor on a flat, stable surface with the screen facing down.

2.With one hand applying downward pressure on the monitor, carefully lift and extend the stand.

3.Lift the device into its upright position on a flat, stable surface.

NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

9

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wallmounting kit or height adjustment base, contact ViewSonic® or your local dealer.

Maximum

Hole pattern

Interface Pad

Pad Hole

Screw Specification

Loading

(W x H)

(W x H x D)

 

& Quantity

14 kg

100 x 100 mm

115 x 115 x 2.6 mm

Ø 5 mm

M4 x 10 mm

4 pieces

 

 

 

 

NOTE: Wall mount kits are sold separately.

1.Turn off the device and disconnect all cables.

2.Place the device on a flat, stable surface with the screen facing down.

3.Unscrew the attached stand and carefully remove it.

4.Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).

100 mm

<![if ! IE]>

<![endif]>mm 100

HDMI

5.Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

10

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Below is an example of setting up a security slot locking device on a table.

11

Making Connections

This section guides you on how to connect the monitor with other equipment.

Connecting to Power

1.Connect the power cord to the AC IN jack at the rear of the device.

2.Connect the power cord plug to a power outlet.

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

Connecting External Devices

HDMI Connection

Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.

NOTE: The monitor is equipped with one HDMI 1.4 port.

HDMI

HDMI

13

DVI Connection

Connect one end of a DVI cable to the DVI port. Then connect the other end of the cable to the DVI port of your computer.

DVI

14

VGA Connection

Connect one end of a VGA cable to the VGA port. Then connect the other end of the cable to the VGA port of your computer.

VGA

15

USB Connection

Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.

NOTE: The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines:

Two (2) USB Type A ports: Connection for your Type A peripheral device(s). (i.e. storage device).

ͫNOTE: To activate the USB Type A port, ensure your computer is also connected to the monitor’s USB Type B port.

One (1) USB Type B port: Connect the USB Type B male cable (square with 2 cut corners) to this port, and then connect the other end of the cable to the USB downstream port of your computer.

16

Loading...
+ 36 hidden pages