
Vi-X05 Series Digital Recorders
(DVR) Quick Reference Guide
Including how to connect a Vi-K1 to a DVR
This is a quick help guide, for more information
regarding the use of this product please refer to the full
user manual supplied with the unit or download it from
www.videoswitch.co.uk (click on Manuals)
Videoswitch
Ocean House Telephone 01252-851510
Redfields Industrial Park Fax 01252-851296
Redfields Lane Email sales@videoswitch.co.uk
Church Crookham Web
Hants GU52 0RD Ref Vi607b.doc
www.videoswitch.co.uk

Connecting a Vi-K1 Remote Keyboard
to a DVR
To control the main monitor
Using a CAT5 cable, connect the socket marked “OUT” on the Vi-K1 to the keyboard input on the
DVR marked “MAIN”.
To control a spot monitor
Using a CAT5 cable, connect the socket marked “OUT” on the Vi-K1 to the keyboard input on the
DVR marked “SPOT1”, “SPOT2” or “SPOT3”.
To address multiple DVRs
Refer to application note Vsd605a.pdf which is available on the Videoswitch web site.
Notes:
1. Use the CAT5 cable provided or any standard (i.e. non cross-over) CAT5 cable.
2. Make sure you use the “OUT” connector on the Vi-K1 to connect to the DVR.
3. The “IN” connectoron the Vi-K1 may be uconnected to the “OUT” connector of a secon d
Vi-K1 if multiple control points are required.