Vetter Pneum. collection tubs 0.3 bar User Manual

Emergency Pneumatics.

Operating Instructions

VETTER Collection tubs 0.3 bar / 4.35 psi

Article No. 9987001306 | © Vetter GmbH I 09/14 I Changes and errors excepted.

Vetter Collection tubs 0.3 bar / 4.35 psi

Contents

1. Important preliminary remarks ....................................2

2. Description of the product ........................................2

2.1 Inventory check ............................................2

2.2 Area of application ..........................................2

2.3 Safety instructions ..........................................2

2.4 Correct handling and usage .................................3

3. Preparing the product for use .....................................3

3.1 Preparations for operation ..................................3

4. Operating Instructions ............................................3

4.1 Operation of the collection tubs with compressed air ........3

4.2 Application of the pneumatic collecting tub for trucks .......3

4.3 Pumping o the collected uid ..............................4

4.4 Deating and Packing ......................................4

4.5 Care and Maintenance ......................................5

5. Inspections .......................................................5

6. Taking the product out of operation ...............................5

7. Technical data ....................................................6

8. Special sizes ......................................................6

9. Resistance against chemicals ......................................6

Page 1/7

1. Important preliminary remarks

Only an understanding and exact observance of this operating manu­al can guarantee correct and perfect operation, achieve the greatest
possible use and meet the requirements contained within the scope
of the Vetter guarantee.

Every application/operation of the Collecting Tub requires an exact
understanding and adherence to these operating instructions.

The operating instructions given here are to be regarded as part of
the product and are to be kept for the complete life duration of the
product. In case the product should be passed on to a successive user
then the operating instructions must also be included.

2. Description of the product

2.1 Inventory check

Collecting

Article No. Description

1513002900 Pneumatic stiening frame 1

1513003000 Pneumatic stiening frame 1

1510006000

1510002200

1600026100

0050004500 Set repair material 1 1

Collecting tub insert 10 m (32 ft.),
Alcryn

Collecting tub insert 20 m (64 ft.),
Alcryn

Pressure regulator 200/300 bar
(2,900/4,350 psi)

tub for trucks

10 m / 32 ft.

1

1 1

Collecting

tub for trucks

20 m / 64 ft.

1

2.2 Area of application

Leaking tanks, containers, bottles etc. are simply placed in the collec­ting tub. The object causing the danger is then secure.

The inside insertion collection tub can be exchanged using Velco fas­teners. Other qualities of material can be supplied if required.

A decontamination capability is very quickly available in combination
with the Vetter shower.

2.3 Safety instructions

All relevant national regulations regarding work safety and accident
prevention are to be just as equally observed as those regulations ge­nerally recognized in the engineering eld. Work protection clothing
is to be worn during operational conditions.

Seite 2/7