Vestil PEL-100A-D3-SWA User Manual

Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc

VESTIL MANUFACTURING CORP.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

PEL-88-A-SWA & PEL-100-A-SWA Wrapping Machines

Use and Maintenance Manual

www.vestilmfg.com e-mail: sales@vestil.com

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it sustained damage during transport. If damage is discovered during the inspection, immediately record a complete

description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end-user

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product.

Table of Contents

Product Specifications……………….…………………..…………………………………………………………………………2 Signal Words….……………………..……………………………………………………………………………………………... 2 Safe Use Recommendations……………………………………………………………..………………………………………. 3 FIG. 1: PEL-88-A-SWA exploded parts diagram & bill of materials…………………………………...………………………4-5 FIG. 2: Electrical system circuit diagram………………………………………………………………………………………… 5 FIG. 3: PEL-100-A-SWA exploded parts diagram & bill of materials………………………………………………………… 6-7 Loading Stretch Wrap……………………………………………………………………………………………………………… 8 Operation Instructions………………………………………………………………………………………………...…………… 8 System Power……………………………………………………………………………………………………………………… 9 Inspections & Maintenance……………………………………………………………………………………………………….. 9 Troubleshooting Guide…………………………………………………………………………………………………………….. 10 Labeling Diagram……...……………………………………………………………………………………………………..……. 10

Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc

Product specifications:

Dimensions and other product specifications appear in the diagrams and table below.

Model A B C D E Net weight

PEL-88-A-SWA

PEL-100-A-SWA

SIGNAL WORDS:

325/8 in. 703/8 in. 52 in. 783/4 in. 437/8 in.

325/8 in. 851/8 in. 67 in. 939/

in. 437/8 in.

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to uses of the product likely cause property damage. The signal words used appear below along with the meaning of each word:

Each person who assembles, installs, uses, or maintains this product should read the entire manual in advance and fully understand the directions. If after reading the manual you do not

Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE

injury

Identifies practices likely to result in product/property damage, such as operation that might damage the product.

understand an instruction, ask your supervisor or employer for clarification, because failure to adhere to the directions in this manual might result in serious personal injury.

210.1 lb.

95.5 kg

217.0 lb.

98.7 kg

Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc

Safe Use Recommendations:

We strive to identify all hazards associated with the use of our products. However, material handling is dangerous and no manual can address every risk. The end-user ultimately is responsible for exercising sound judgment at all times.

Material handling is dangerous. Improper or careless operation of this wrapping machine might result

in serious personal injuries.

 Failure to read and understand the entire manual before assembling, using or servicing the product constitutes misuse. Read the manual whenever necessary to refresh your understanding of proper use and

maintenance procedures.  DO NOT use the wrapping machine unless it is in normal operating condition. Inspect the unit as described in the inspection instructions on p. 9 to determine whether it is functioning normally. DO NOT use the machine unless it passes every part of the inspection or until it is restored to normal operating condition.

 DO NOT use the machine to lift, carry, or transport items or people.  Always watch the carriage carefully while raising and lowering it.  This crane is designed for material handling ONLY. DO NOT use the crane to lift people.  ALWAYS load the wrapping material properly (see “Loading stretch wrap” on p. 8).  If repairs are necessary, ONLY install manufacturer-approved replacement parts.  The carriage (see item no. 2 on p. 4 & 6) should elevate and lower smoothly. Watch for binding or jerky movement

and listen for unusual noises. Remove the unit from service if you observe anything abnormal.

 DO NOT use this wrapping machine UNLESS all labels are in place & readable (see “Labeling diagram” on p. 11.)  DO NOT modify this product in any way. Modifying the machine automatically voids the limited warranty and might

make it unsafe to use.

Proper use and maintenance are essential for this product to function properly.

 Always use this product in accordance with the instructions in this manual.  Periodically lubricate moving parts.  Keep the product clean & dry at all times. Always store the unit inside.  Only use approved replacement parts. To order replacement or spare parts for this equipment, contact the factory.

Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc

FIG. 1: PEL-88-A-SWA exploded parts diagram and bill of materials

Detail view of carriage rollers:

Item no. 12 (touchpad control):

Status light indicates whether power is ON or OFF.

Turns power on and off.

Battery charge meter indicates percent of full charge remaining

FASTER and SLOWER buttons control the speed the carriage travels up and down the mast

Speed gauge indicates current travel speed setting

These buttons control vertical position of the carriage

Detail view inside motor housing:

Swivel caster with brake (item no. 22):

+ 7 hidden pages