Vestil NL170-G4 User Manual
SAFETY DATA SHEET
Issue Date 16-Mar-2016 Revision Date 06-May-2015 Version 1
1. PRODUCT AND COMPANY IDENTIFICATION
Product identifier
Product Name
Other means of identification
Product Code
Synonyms
Details of the supplier of the safety data sheet
Company Name
Emergency telephone number
Emergency Telephone
Restore 10 Floor Finish Restorer and Spray Buff
NL170
None
Nyco Products Company
5332 Dansher Road
Countryside, IL 60525
(708) 579-8100
nycoproducts.com
Chemtrec 1-800-424-9300
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status
This product has been classified in accordance with the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Acute toxicity - Oral Not classified
Acute toxicity - Dermal Not classified
Label elements
Emergency Overview
Appearance Opaque Physical state Liquid
Precautionary Statements - Response
Immediately call a POISON CENTER or doctor/physician
Specific Treatment (See Section 4 on the SDS)
Hazards not otherwise classified (HNOC)
Other Information
• Harmful to aquatic life with long lasting effects
• Harmful to aquatic life
Unknown Acute Toxicity 0% of the mixture consists of ingredient(s) of unknown toxicity
Odor Typical Acrylic Polymer
3. COMPOSITION/INFORMATION ON INGREDIENTS
_____________________________________________________________________________________________
Page 1 / 7
NL170 Restore 10 Floor Finish Restorer and Spray
Revision Date 06-May-2015
Buff
_____________________________________________________________________________________________
Chemical Name CAS No. Weight-% Trade Secret
2-(2-methoxyethoxy)ethanol 111-77-3 1-5 *
Tributoxyethyl Phosphate 78-51-3 1-5 *
*The exact percentage (concentration) of composition has been withheld as a trade secret.
4. FIRST AID MEASURES
First aid measures
Skin Contact
Eye contact
Inhalation
Ingestion
Most important symptoms and effects, both acute and delayed
Symptoms
Indication of any immediate medical attention and special treatment needed
Note to physicians
Wash off immediately with plenty of water. Wash skin with soap and water.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a physician.
Remove to fresh air.
Clean mouth with water and drink afterwards plenty of water.
Any additional important symptoms and effects are described in Section 11: Toxicology
Information.
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media
Specific hazards arising from the chemical
No Information available.
Caution: Use of water spray when fighting fire may be inefficient.
Explosion data
Sensitivity to Mechanical Impact
Sensitivity to Static Discharge
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
None.
None.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Environmental precautions
Environmental precautions
Methods and material for containment and cleaning up
Methods for containment
Methods for cleaning up
Ensure adequate ventilation, especially in confined areas.
See Section 12 for additional ecological information.
Prevent further leakage or spillage if safe to do so.
Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
NL170 Restore 10 Floor Finish Restorer and Spray
Revision Date 06-May-2015
Buff
_____________________________________________________________________________________________
Precautions for safe handling
Advice on safe handling
Conditions for safe storage, including any incompatibilities
Storage Conditions
Incompatible materials
Handle in accordance with good industrial hygiene and safety practice.
Keep containers tightly closed in a dry, cool and well-ventilated place.
None known based on information supplied.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Appropriate engineering controls
Engineering Controls
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin and body protection
Respiratory protection
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies.
Showers, Eyewash stations & Ventilation systems.
Wear safety glasses if handling large volume.
Rubber gloves if prolonged contact and/or handling large volumes.
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Positive-pressure supplied air respirators or air
purifying respirators may be required for high airborne contaminant concentrations.
Respiratory protection must be provided in accordance with current local regulations.
General Hygiene
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
Appearance
Color
Odor
Odor threshold
Property Values Remarks • Method
pH
Specific Gravity
Viscosity
Melting point/freezing point
Flash point
Boiling point / boiling range
Evaporation rate
Flammability (solid, gas)
Flammability Limits in Air
Upper flammability limit:
Lower flammability limit:
Vapor pressure
Vapor density
Water solubility
Partition coefficient
Autoignition temperature
Decomposition temperature
Liquid
Opaque
White
Typical Acrylic Polymer
No Information available
8.0 - 9.0
1.0
<25 cP @ 25°C
No Information available
>200 °F
>212 ° F (at 760 mm Hg)
No Information available
No data available
No Information available
No Information available
No Information available
No Information available
Complete
No Information available
No Information available
No Information available
Loading...