Vertex Standard VX-P920, VX-920 Series, VX-970 Series, VX-929, VX-979 Brochure & Specs

...
VHF • UHF Portable Radios
VX
-
920/970
SERIES
VX-929/979/P929/P979
VX-924/974/P924/P974
VX-921/971/P921/P971
48 ch/3 groups without LCD
VHF UHF
Measurements per EIA standards unless noted above. Specifications are subject to change without notice or obligation.
Transmitter Specifications Measurements made per TIA/EIA-603 Power Output 5 / 2.5 / 1 / 0.25 W Modulation
16K0F3E 11K0F3E Spurious Emissions 70 dB FM Hum and Noise (W/N) 45 / 40 dB Audio Distortion Less than 3 % (@1 kHz)
Receiver Specifications Measurements made per TIA/EIA-603
Sensitivity (12 dB SINAD) EIA
0.25 / 0.32 µV
Adjacent Channel Selectivity (W/N)
75 / 70 dB
Intermodulation
(W/N)
75 / 70 dB
Spurious and Image Rejection
80 dB 75 dB
Hum and Noise
(W/N)
48 / 42 dB
Audio Output 700 mW @16 Ohms, 5 % THD
General Specifications
Frequency Range 134-174 MHz
400-470 MHz 450-512 MHz Number of Channels 512 (VX-929 / 924/ 979/ 974) / 48 (VX-921 / 971) Number of Groups 32 (VX-929 / 924 / 979 / 974) / 3 (VX-921 / 971) Channel Spacing 12.5 / 20 / 25 kHz PLL Steps 1.25 / 2.5 / 5 / 6.25 kHz 5 / 6.25 kHz Operating Voltage 7.4 VDC ±20 % Current Consumption STBY (w/save) 75 (30) mA 75 (30) mA RX 200 mA 200 mA TX 1.7A 1.9A
Battery Life (w/Battery save)
12.5 h (16 h) w/ FNB-V87LI
11.5 h (15 h) w/ FNB-V87LI (RX 5 : TX 5 : STBY 90 Duty) Temperature Range –22° F to + 140° F (–30° C to +60° C) Frequency Stability ±2.5 ppm Dimensions (W x H x D)
2.3" x 5.3" x 1.5" (57.5 x 133 x 37.5 mm)
Weight (approx.)
13.0 oz (370 g) w/Ant, Battery (FNB-V86LI) and Belt clip
Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Immersion* Vibration Shock
500.2/Procedure I, II
501.2/Procedure I, II
502.2/Procedure I, II
505.2/Procedure Il Cat. A1
506.2/Procedure I
507.2/Procedure II, III
509.2/Procedure I
510.2/Procedure I
512.2/Procedure I
514.3/Procedure I Cat. 10
516.3/Procedure I
500.1/Procedure I, II
501.1/Procedure I, II
502.1/Procedure I, II
505.1/Procedure I
506.1/Procedure I
507.1/Procedure I, II
509.1/Procedure I
510.1/Procedure I
512.1/Procedure I
514.
2/Procedure I Cat. 10,8
516.2/Procedure I
500.3/Procedure I, II
501.3/Procedure I, II
502.3/Procedure I, II
505.3/Procedure Il Cat. A1
506.3/Procedure I, II
507.3/Procedure II, III
509.3/Procedure I
510.3/Procedure I
512.3/Procedure I
514.4/Procedure I Cat. 10
516.4/Procedure I
500.4/Procedure I, II
501.4/Procedure I, II
502.4/Procedure I, II
503.4/Procedure I
505.
4/Procedure l, Il Cat. A1
506.4/Procedure I
509.4/Procedure I
510.4/Procedure I, III
512.4/Procedure I
514.
5/Procedure I Cat. 20,24
516.5/Procedure I
VX-920/970/P920/P970 Series : Applicable MIL-STD
Standard
MIL 810C
Methods/Procedures
MIL 810D
Methods/Procedures
MIL 810E
Methods/Procedures
MIL 810F
Methods/Procedures
VX-920/970
SERIES
2006.0503NA(U)
B9200492B Printed in Japan
Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Phone 714/827-7600; Fax 714/827-8100 http://www.vertexstandard.com
Intrinsically Safe Information
The Intrinsically Safe Version of VX-920/970/P920/P970 series, equipped with any of optional units, meets the requirements of ANSI/UL913 6th Edition for Class I, Division 1, Groups A-D; Class II, Groups E-G; and Class III for hazardous locations.
Specifications
VHF UHF
Transmitter Specifications
Measurements made per TIA/EIA-603 (Analog), TIA-102 CAAA (Digital) Power Output 5 / 2.5 / 1 / 0.25 W Modulation Analog (W/N) 16K0F3E / 11K0F3E Digital 8K10F1D / 8K10F1E Spurious Emissions 70 dB FM Hum and Noise Analog (W/N)
46 / 40 dB
Audio Distortion Less than 3 % @ 1kHz
Receiver Specifications
Measurements made per TIA/EIA-603 (Analog), TIA-102 CAAA (Digital)
Sensitivity (12 dB SINAD) EIA
0.25 µV 0.32 µV Digital 5% BER 0.25 µV 0.32 µV Digital 1% BER 0.35 µV 0.40 µV Adjacent Channel Selectivity Analog (W/N)
75 / 70 dB 75 / 70 dB
Intermodulation Analog (W/N)
75 / 70 dB 75 / 70 dB
Spurious and Image Rejection Analog
80 dB 75 dB
Hum and Noise Analog (W/N)
48 / 42 dB
Audio Output 700 mW @16 Ohms, 5% THD
General Specifications
Frequency range 134 - 174 MHz 380 - 450 MHz 450 - 512 MHz Number of Channels 512 (VX-P929/P924/P979/P974) / 48 (VX-P921/P971) Number of Groups 32 (VX-P929/P924/P979/P974) / 3 (VX-P921/P971) Channel Spacing 12.5 / 20 / 25 kHz PLL Steps 1.25 / 2.5 / 5 / 6.25 kHz 5 / 6.25 kHz Operating Voltage 7.4 VDC ±20 % Current Consumption STBY (Analog / Digital) 90 / 130 mA 90 / 130 mA RX 250 mA 250 mA TX 1.7 A 1.9 A
Battery Life (w/Battery save)
10.4 h (14.4 h) w/ FNB-V87LI
10.0 h (13.0 h) w/ FNB-V87LI
(RX 5 : TX 5 : STBY 90 Duty) Temperature Range –22° F to + 140° F (-30° C to + 60° C) Frequency Stability ±2.5 ppm Dimensions (W x H x D) 2.3" x 5.3" x 1.5" (57.5 x 133 x 37.5 mm) Weight (approx.)
13.4 oz (380 g) w/Ant, Battery (FNB-V86LI) and Belt Clip
VX-P920/P970
SERIES
VX-P920 /P970 Series
*VX-970 / P970 Series
VX-920/P920 Series
VX-970/P970 Series / Special order Version
VX-920/P920 Series : Applicable International Protection Standard VX-970/P970 Series : Applicable International Protection Standard
表4 表1
VX-920/970USA
The optional SRX-3 (UHF) and SRX-4 (VHF) Multi-Band Receiver Units expand the versatility of the VX-P920/P970 Series significantly. For example, a UHF version of the VX-920/970 Series may have the SRX-4 installed, expanding reception to include both UHF and VHF channels so that information or commands from a dispatch center will never be missed.
The unique Clear Voice feature provides a specialized form of audio processing that helps the user's voice stand out more clearly when he or she is operating in a very noisy environment.
Other Features
P25 DIGITAL MODE
P25 Digital Conventional
AMBE+2 Vocoder
NAC (Network Access Code)
Talk Group ID
Individual ID List / Paging Group
RSSI Indicator / RSSI Warning
Mixed Mode
AES / DES Encryption Options
NAC (Network Access Code) are programmable and are typically used to control network access but may also be used to steer repeater operations. NAC codes are used the same way as an analog CTCSS tone (or DCS code). There are 4096 unique NAC codes.
For superior voice quality in narrow-band, digital, P25 mode of operation our products use the AMBE+2™ Vocoder protocol from DVSI, Inc.
Because our products are fully TIA/EIA 102 Series compliant,
you are assured of broad compatibility within a wide range of P25 Digital Mode systems.
Talk Group IDs (TGIDs) provide for the logical grouping of radio users into distinct organizations and can also be used to minimize co-channel interference. There are more than 65,000 unique TGID addresses.
Channels can be programmed for analog only, digital only or Mixed Mode dual Analog/Digital operation. The radio will automatically switch to the appropriate format when it receives a call. This capability provides seamless switching between Analog and Digital systems saves available channel programming capacity and simplifies user operation of the unit.
Certain models feature Liquid Crystal Displays (LCD) and provide visual indication of receive signal level (signal strength). All models feature an audible indication of low receive signal strength. When received signal strength falls to a level not suitable for reliable communications, an alert tone will sound. This feature is useful if the unit has no display or if it is difficult for the user to see the display during normal operation.
P25 contains special provisions for Emergency Calling. When an "Emergency" signal is received, the radio's "Busy" LED can provide a very bright white blinking indication while the LCD can show the Unit ID or Alpha Tag of the unit in distress...
Data Encryption Standard (DES) is an older format system based on a 64 bit encryption algorithm... Advanced Encryption Standard (AES) is a newer and more robust system based on 256 bit algorithm. Encryption Keys Multiple encryption keys can be stored in the unit as required.
The calling station will be identified either by their Alphanumeric Tag (if defined in the Individual ID List), or by their ID number (if a Tag is not defined).
3
VERSATILITY
VX-P929/P924/P979/P974 with LCD:
Maximum 512 Channels/32 Groups
VX-P921/P971 w/o LCD: Maximum 48 Channels/3 Groups
The LCD-equipped version provides massive channel storage capability: up to 512 channels may be programmed into as many as 32 groups. A single radio may therefore be programmed with channel sets for a number of different jurisdictions or organizations, ensuring seamless interoperability. The VX-P920/P970 Series without the LCD can accommodate up to 48 channels in up to three groups.
In addition to the traditional battery saver modes, our exclusive
Intelligent Saver reduces power consumption associated with the DSP.
Intelligent RX/TX Battery Saver
Rugged, Submersible Design
Submersible External Speaker/Microphone MH-66 Series (optional)
The VX-P920 Series portables are housed in an ultra-rugged, impact-resistant case that is designed to exceed U.S. MIL-STD 810C/D/E/F standards for shock, vibration, and driving rain; it also meets international waterproofing standard IP55 (water jets) and IP57 (submersion i
n water to a depth of 3 feet for up to 30 minutes). For even more demanding environments, the VX-970 Series version meets IP68 specifications (submersion to 6 feet for 3 hours), and is available via special order.
When operating in an emergency situation where immersion of the radio and/or its accessories could occur, the optional MH-66 Series Speaker/Microphone is rated to the same submersibility specifications as the portable itself (IP57), ensuring that your essential communications won't be interrupted if the microphone gets dropped into the water.
Multi-Band Reception (optional)
Clear Voice (Improves TX Audio in Noisy Environments)
CTCSS/DCS Encode and Decode DTMF ANI/DTMF Paging
2-Tone Encode and Multiple 2-Tone Decode User Selectable
Tone (VX-P929/P924/P979/P974) Scan: Channel Scan, Priority Scan,
Dual Watch, Follow-me Scan, Follow-me Dual Watch, and
TA Scan Compander (Wide and Narrow Band) Lone Worker
Programmable Function Keys PC Programmable Power Output: 5 W
Wide/Narrow (12.5/20/25 kHz) Programmable per
Channel
Battery Indicator Loud 700 mW Audio Output
Speed Dial (16-key Version only) 7-Color LED for Incoming Call Alert Large LCD (Dot Matrix/12 Characters + 7 Segments/ 3 Characters) (VX-P929/P924/P979/P974) Programmable Home Channel Function Audio Pitch Control •ARTS™ (Auto- Range Transpond System) BCLO/BTLO and TOT
In P25 operation each transceiver can be programmed with a unique Unit ID. There are over 16 Million possible Unit IDs available. Additionally, using the Paging Group feature, each unique Unit ID can be identified with an Alphanumeric Tag, making selective calling by name is possible. What s more, if no Paging call list has been defined, direct input of the Unit ID number is possible, permitting direct calling of any particular user. When receiving, the Alphanumeric Tag (Name) of the calling station will be shown (LCD models only). If no call list has been defined, only the transmitting station's Code number will be displayed. The Paging Group may be subdivided into up to 15 sub-groups, and each channel may be assigned to a sub-group in advance.
Actual Size
Reliability, ruggedness, and interoperability like never before. The VX-P920/P970 series of Vertex Standard portables is ready to respond when you are, with a wide array of signaling capability, along with big audio, operator and system security measures, and PC programmability for quick
deployment. Submersible to IP57 (VX-P920) / IP68 (VX-P970) specifications, and built to U.S. MIL-STD specifications, the VX-P920/P970 Portables are your assurance of long-term reliability under the most difficult operating circumstances.
VX
-
P920/P970 SERIES
VX-P929/P979
VX-P924/P974 VX-P921/P971
P25 VHF•UHF Portable Radios
2
VX-P920 Series
VX-P970 Series / Special order Version
512 ch/32 groups with 16 Keys and LCD
512 ch/32 groups with 4 Keys and LCD
48 ch/3 groups without LCD
2
3
VX-920/970USA
Loading...
+ 2 hidden pages