Verizon 2200 User Manual

1

Mobile Broadband / NationalAccess

!
!

MiFi™ 2200 – Intelligent Mobile Hotspot

Product user guide

2

Welcome

Congratulations on purchasing the Novatel Wireless MiFi 2200 Intelligent Mobile Hotspot for
Mobile Broadband and Wi-Fi!

Before installing the MiFi 2200, VZAccess Manager software and drivers, review this manual,
which outlines the features and functions of the MiFi 2200 hardware.

This device operates over the high-speed Mobile Broadband and NationalAccess networks in
the 800/1900 bands and Wi-Fi enabling you to connect multiple devices at high speeds to the
Internet, your corporate Intranet, Wi-Fi-enabled devices and email virtually anywhere!

!

The$MiFi$2 200$Packa ge$

The Verizon Wireless MiFi 2200 package includes:

- Verizon Wireless MiFi 2200

- AC Wall Charger

- Lithium Ion Battery

- Storage Pouch

- microUSB Cable

- Quick Reference Guide

Customer$ Service$

For Customer Service while in the U.S. or Canada, dial 1-800-922-0204.

!

3

Wireless communications

IMPORTANT Notice

Due to the transmission and reception properties of wireless communications, data can
occasionally be lost or delayed. This can be due to the variation in radio signal strength that
results from changes in the characteristics of the radio transmission path. Although data loss is
rare, the environment where you operate the MiFi 2200 may adversely affect
communications.

Variations in radio signal strength are referred to as fading. Fading is caused by several
different factors including signal reflection, the ionosphere, and interference from other radio
channels.

Verizon Wireless or its partners will not be held responsible for damages of any kind resulting
from the delays or errors in data transmitted or received with the MiFi 2200 device, or failure
of the MiFi 2200 device to transmit or receive such data.

Safety$hazards$

Do not operate the MiFi 2200 device in an environment that may be susceptible to radio
interference resulting in danger specifically;

Areas where prohibited by the law

o Follow any special rules and regulations and obey all signs and notices. Always turn

off the host device and remove the modem from the USB port when instructed to
do so, or when you suspect that it may cause interference or danger.

Where explosive atmospheres may be present

o Do not operate the MiFi 2200 in any area where a potentially explosive

atmosphere may exist. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Be aware and comply with all signs and
instructions.

o Users are advised not to operate the MiFi 2200 while at a refueling point or

service station. Users are reminded to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.

o Areas with a potentially explosive atmosphere are often but not always clearly

marked. Potential locations can include gas stations, below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains chemicals or particles, such as
grain, dust or metal powders, and any other area where you would normally be
advised to turn off your vehicle engine.

4

Near Medical and life support equipment

o Do not operate the MiFi 2200 in any area where medical equipment, life support

equipment, or near any equipment that may be susceptible to any form of radio
interference. In such areas, the host communications device must be turned off.
The MiFi 2200 may transmit signals that could interfere with this equipment.

On an aircraft, either on the ground or airborne

o In addition to FAA requirements, many airline regulations state that you must

suspend wireless operations before boarding an airplane. Please ensure that the
host device is turned off and the MiFi 2200 is removed from the USB port prior to
boarding aircraft in order to comply with these regulations. The MiFi 2200 can
transmit signals that could interfere with various onboard systems and controls.

While operating a vehicle

o The driver or operator of any vehicle should not operate a wireless data device

while in control of a vehicle. Doing so will detract from the driver or operator's
control and operation of that vehicle. In some countries, operating such
communications devices while in control of a vehicle is an offense.

Limitation$ of$liability$

The information contained in this document is subject to change without notice and should
not be construed as a commitment by Verizon Wireless Inc.

Copyright$

©2009 Verizon Wireless, Inc.

Patents$and$licenses $

Licensed by QUALCOMM Incorporated under one or more of the following Patents:

4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338

5

Software Drivers License

Proprietary Rights Provisions:

The software drivers provided with this product are copyrighted by Verizon Wireless and/or
Verizon Wireless’ suppliers. And although copyrighted, the software drivers are unpublished
and embody valuable trade secrets proprietary to Verizon Wireless and/or Verizon Wireless’
suppliers. The disassembly, decompilation, and/or Reverse Engineering of the software drivers
for any purpose is strictly prohibited by international law. The copying of the software drivers,
except for a reasonable number of back-up copies is strictly prohibited by international law. It
is forbidden by international law to provide access to the software drivers to any person for
any purpose other than processing the internal data for the intended use of the software
drivers.

U.S. Government Restricted Rights Clause:

The software drivers are classified as "Commercial Computing device Software" and the U.S.
Government is acquiring only "Restricted Rights" in the software drivers and their
Documentation.

U.S. Government Export Administration Act Compliance Clause:

It is forbidden by US law to export, license or otherwise transfer the software drivers or
Derivative Works to any country where such transfer is prohibited by the United States Export
Administration Act, or any successor legislation, or in violation of the laws of any other
country.

!

6

MiFi 2200 Intelligent Mobile Hotspot: Overview

Thank you for choosing the Verizon Wireless MiFi 2200 Intelligent Mobile
Hotspot by Novatel Wireless with Mobile Broadband and Wi-Fi!

MiFi 2200 is an Intelligent Mobile Hotspot, empowering you with high-speed data access on
the Verizon Wireless Mobile Broadband wireless data network and Wi-Fi connectivity.

With the MiFi 2200, you can:

• Connect to High Speed Wireless Data (Mobile Broadband and NationalAccess)

• Benefit from Wi-Fi Connectivity

With the MiFi 2200 Intelligent Mobile Hotspot, connect via Wi-Fi and access Mobile
Broadband/NationalAccess to browse the Internet, access email, run businesses
applications and more from a computer or most Wi-Fi compatible devices.

The MiFi 2200 enables multiple Wi-Fi enabled devices to connect at one time., such as
notebooks, desktops, tablet computers, personal digital assistants, CE devices, and
most Wi-Fi enabled consumer devices.

Typical battery usage time is 4 hours active and 40 hours standby in Wi-Fi mode* (*for one Wi-Fi client)

• Experience NovaSpeed™ Technology
NovaSpeed, the latest software technology from Novatel Wireless, enhances
performance with streaming video, online gaming, simultaneous uploads and
downloads, and large file transfers with minimal interruptions or buffering.

• Manage Wireless Network Activity – VZAccess Manager and MiFi Settings

Includes VZAccess Manager software for automatic installation without a CD and easy
navigation. The web-based MiFi Settings is for device status and activation via USB and
Wi-Fi.

1. VZAccess Manager: A powerful application tool designed to make piloting your remote

office a breeze. VZAccess Manager allows you to manage, monitor, and customize your
wireless network activity through an easy-to-use interface.

NOTE: VZAccess Manager is required for activation and firmware/PRL updates.

2. MiFi Settings: Allows you to manage, monitor, and customize your Wi-Fi and Mobile

Broadband connection through an easy-to-use interface when the device is in Wi-Fi mode
(i.e. without the use of the USB cable).

7

• Choose between Two Operating Modes:
Mobile Broadband with USB Cable or Wi-Fi

The MiFi 2200 package includes a battery for operation via Wi-Fi and a USB cable.

USB Cable mode supports Windows Vista, XP, 2000; Mac OS X 10.4 or higher.
*See System Requirements for a complete list of operating system support.

Additional features include

• Advanced embedded antenna design for Mobile Broadband and Wi-Fi

• VPN capability

• Auto installation and connectivity options

• 2-Way Short Messaging Service (SMS) (Mobile Broadband only)

• NDIS configuration

8

About$Your$MiFi$220 0$Intelligent$Mobile$H otspot$

Your MiFi 2200 has the following parts:

1. Power Button: Indicates power, battery, and roaming activity. Please see the following
page for an explanation of the Power button LED states. (See also page 9 for Power Button
LED description)

2. microUSB Connector: Connects to computing devices equipped with a Type A USB port.

3. Service Status Indicator (LED): Visual service status LED indicator that shows you service

and data modes. Please see the following page for an explanation of these Service Status
LED states. (See also page 9 for Service Status Indicator LED description)

Care$of$Your$MiFi$2200$Wireless$Intelligent$Mobile$Hotspot$

As with any electronic device, the MiFi 2200 must be handled with care to ensure
reliable operation. Verizon Wireless recommends the following handling guidelines:

• Do not apply adhesive labels to the MiFi 2200; they may cause the device to

potentially overheat and they may alter the performance of the antenna system.

• The USB connector should plug easily into your computer’s Type A USB port. Forcing

the device into a port may damage the connector.

• Protect the MiFi 2200 from liquids, dust, and excessive heat.

• Store the MiFi 2200 in a safe place, when not in use.

9

LED$States$

Service Status Indicator (LED)!!

The MiFi 2200 is designed with a status light that simply indicates what the connection status
is.

LED Color

Meaning

LED not lit

No Power to MiFi

LED GREEN - Solid

MiFi is powered but not transmitting or

receiving

LED GREEN – slow blinking

MiFi is powered on but there is no service

LED GREEN – intermittent blinking

MiFi transmitting/receiving data; blinking

rate proportional to data speed

Power Button (LED)

The MiFi 2200 is designed with a power button that lights up to indicate whether or not the
device is powered on and what the charging status is.

LED Color

Meaning

LED not lit

No Power to MiFi

LED BLUE – Solid

MiFi is Powered on and Roaming

LED GREEN - Solid

MiFi is powered on and fully charged

LED GREEN – glowing

MiFi is in hibernate

LED RED - blinking

MiFi Battery is Critically Low.

LED AMBER - solid

MiFi Battery is Charging

LED AMBER - blinking

MiFi Error, see Troubleshooting

10

About$the$VZAccess$Manager$Software$and$the$MiFi$Settings$

!

Ways$to$Access$

The MiFi 2200 supports Mobile Broadband and Wi-Fi service for a superior wireless data
connection.

Mobile Broadband/NationalAccess

Now you can get the broadband-like speed you require to work efficiently outside the home
or office. You can connect to the Internet, corporate intranet, check your email and download
attachments with average download speeds of 400 - 700 Kbps. Mobile Broadband gives you
the freedom to stay productive and connected whether you're on the road or in a meeting
across town. You also receive NationalAccess service when outside the Mobile Broadband
Rate and Coverage Area. NationalAccess is available in thousands of cities and towns and
allows download speeds of 60-80 Kbps and burst up to 144 Kbps.

Rev. A capable data devices

• Download: typical download speeds of 600 kbps - 1.4 Mbps.

• Upload: typical upload speeds of 500-800 kbps.

Rev. 0 capable data devices

• Download: typical download speeds of 400-700 kbps with a maximum download speeds

burst to 2Mbps.

• Upload: typical upload speeds of 60-80 kbps with peak speeds burst to 144 kbps.

Subject to Customer Agreement, Calling Plan, credit approval & other service terms.

Mobile Broadband Rev.A speed claim based on our network tests with 5 MB FTP data files without compression. Verizon Wireless is
rapidly adding Rev. A capability to your Mobile Broadband service area. Your Mobile Broadband Rev. A-enabled device will indicate
coverage when you are in a Mobile Broadband Rev. A service area. When outside the Rev. A service area, your wireless device will revert
to Mobile Broadband Rev. 0 (typical download speeds will be 400–700 Kbps and upload speeds will be 60–80 Kbps) or NationalAccess
coverage areas, where available. Actual throughput speed and coverage may vary. Speed claims not applicable when roaming.

NationalAccess Rev.0 speed claim based on our network test with 101 KB FTP data files, without compression. Actual throughout speed
and coverage may vary. Speed claim not applicable when roaming.

Wi-Fi 802.11b/g

802.11b uses the 2.4GHz frequency spectrum with a bandwidth of 11Mbps.

802.11g (2.4Ghz, 54Mbps).

11

Getting Started

In order to get started with your new device, you will need to follow a few simple steps:

1. Review and confirm that your computer meets the minimum system requirements

2. Insert and charge the battery

3. Plug into USB and activate the MiFi 2200

The$MiFi$2 200$System$Requirements$

To install and use the MiFi 2200, your host computer must meet these requirements:

Operating System
* IN USB CABLE MODE with USB
Cable ONLY

Windows® Vista, XP (SP2 or higher), 2000

NOTE: Windows XP SP1, Windows 2000 SP3 and
SP4 require specific OS patches. For
details please go to www.vzam.net.

- OR -

Mac® OS X 10.4 or higher

Software

Internet browser software (i.e. Internet Explorer,
Netscape, Safari, Firefox, AOL)

MiFi Software

Mobile Broadband/USB Cable Mode: VZAccess Manager
included on the device, no CD required.

Wi-Fi Mode: MiFi Settings

CPU

166 MHz or higher

Interface

One Type-A USB port and/or802.11 b/g

Memory (RAM)

128 MB

Hard Disk Space

100 MB

!

12

How to Use Your MiFi 2200

This chapter provides information and instructions for setting up the MiFi 2200 for the first
time. There are two power modes of use with the MiFi 2200, Mobile Broadband and Wi-Fi,
which are detailed in this section.

The Quick Reference Guide that was included in the box when you purchased your product
and the VZAccess Manager Software User Guide details the installation and configuration of
the MiFi 2200 with the VZAccess Software.

Follow these steps to begin using the MiFi 2200:

IMPORTANT: Before using the MiFi 2200 for the first time, please insert the battery and
charge fully.

Power$Managemen t$

There are three power modes in which the MiFi 2200 may be used:

- Battery

- AC Wall Charger

- microUSB Cable

Battery: In this mode, the MiFi 2200 is powered by the rechargeable battery.

AC Wall Charger: In this mode, the MiFi 2200 is powered by the AC Wall Charger.

microUSB Cable: In this mode, the MiFi 2200 is powered directly by your computer via the

microUSB cable.

WARNING: Mac Users: Plugging MiFi 2200 into a USB port for charging while MacBook® is in standby
may frequently wake up the computer.

$

13

How$to$us e$the$Battery$

Battery tips

Battery life depends on the network, signal strength, temperature, features, and accessories
you use.

- Always use Novatel Wireless Original batteries and chargers. The warranty does not cover
damage caused by non-Novatel Wireless batteries and/or chargers.

- New batteries or batteries stored for a long time may take more time to charge.

- When charging your battery, keep it near room temperature.

- When storing your battery, keep it uncharged in a cool, dark, dry place.

- Never expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Never

leave the device in an unattended vehicle due to uncontrollable temperatures that may
be outside the desired temperature for this device.

- It is normal for batteries to gradually wear down and require longer charging times. If you
notice a change in your battery life, it is probably time to purchase a new battery.

Contact your local recycling center for proper battery disposal. See page 46 for
details on proper disposal of the battery.

WARNING: Never dispose of batteries in a fire because they may explode.

Before using the MiFi 2200, read the battery safety information in the “Safety and General
Information” section at the back of this guide. You will need to install and charge the battery
as described below. Some batteries perform best after several full charge/discharge cycles.

14

How to insert and charge the battery

1. Open the battery compartment, located on the bottom of the device.

2. Insert the battery by lining up the gold contact points on the battery with the gold
contact points in the battery compartment.

3. Once the battery is secure, place the battery cover back on the device until it locks into
place.

4 . Connect the microUSB end of the AC wall charger to the microUSB port of the device as

shown.

15

5. Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge
for at least two and a half hours.

IMPORTANT: Please use only an approved charging accessory to charge your device.
Improper handling of the charging part, as well as the use of an incompatible charger, may
cause damage to your device and void the Warranty.

6. You are now ready to install the drivers and VZAccess Manager software. The first time you
use the device, you must use the microUSB cable (included).