Veris H663 Datasheet

H663 SERIES

H663 Series transducers are sold as an open device.

Branch Current Monitor, Split-Core

Monitor Current on Every Breaker

VERIS INDUSTRIES

H663

DESCRIPTION

The H663 Series split-core branch circuit current monitoring system provides a costeective solution for electrical load management. It is ideally suited for applications where load capacit y requirements are dynamic, such as data centers and sales oors. The split-core housing makes this device perfect for retrot projects.

The H663 monitors the current draw of each critical breaker in a panelboard. The accumulated information can be transmitted to a Modbus host and/or viewed on an optional local display via an RS-485 network. Data updates occur approximately once per second to provide timely preventative maintenance information. As a circuit approaches capacity, warning and alarm levels trigger (see graph, facing page). Additional capacity can then be added, or loads balanced, to prevent costly downtime from overloaded circuits and unexpected breaker trips.

power/energy monitoring

APPLICATIONS

● Retrotting panelboards

● Cost allocation

● Protecting against overload

● Managing and balancing loads

● Lighting circuits

FEATURES

● Reports current consumed on each circuit in the panel board...one product covers

multiple points

● Provides Modbus registers for current limit warnings and alarms...prevents

breaker trips

● Integrates with available network display for local indication

● Split-core design and network compatibility... ideal for retrot applications

● Up to 63 H663s can be networked on one Modbus RS-485 drop...simplied

wiring

● Split-core CTs are perfect for quick installation on critical load applications that

can’t be powered down

Year

SPECIFICATIONS

Inputs:

Input Power 120 VAC (+10/-2 5%) line-to-neutral, 50/60 Hz; (208/230 VAC for H663SM-x xE) Frequency 50/60 H z

Accuracy:

Accurac y ±5% of reading from 5 A to 50 A Sampling Frequency 1280 Hz Update Rate 1.2 sec

Outputs:

Type Modbus® RTU Connection DIP-switch selectable 2-wire or 4-wire Address DIP-switch selectable address 1 to 247 Baud Rate DIP-switch selectable 2400, 4800, 96 00, 19200 Parity DIP-switch selectable NONE, ODD, EVEN Communication Format 8 data-bit s, 1 start-bit, 1 stop-bit

Mechanical:

Connection to Conductor Inductive split-core CT * Number of Channels 42, 30, 24, 12, or 1 (Choose one option)

Environmental:

Operating Temperature Range 0° to 60°C (32° to 140°F) (<95% RH, non-condensing) Storage Temperature Range -40° to 70°C (-4 0° to 158°F)

* Do not apply 300 V Class current t ransformers to circuits havin g a line-to-neutral voltage greater than 300 V, unless adequate additio nal insulation is applied between the primar y conductor and the current transformers. Veris assumes no respo nsibility for da mage of equipment or personal injur y caused by products operated on circuits above their published ratings.

Warranty

Observe handling precautions for static sensitive devices to avoid damage to the circuitry which would not be covered under the factory warranty.

800.354.8556

+1 503.598.4564

www.veris.com

HQ0001911.A 01121

800.354.8556

2.5"

(64 mm)

2.0"

(51 mm)

2.1"

(54 mm)

3.5"

(89 mm)

2.9"

(74 mm)

0.4” x 0.2”

(10 mm x 5 mm)

Slot (2x)

1.3"

(33 mm)

0.6"

(16 mm)

0.5"

(13 mm)

2.1"

(54 mm)

1.0"

(26 mm)

*20A

*Example represents 20 Amp circuit †Conﬁgurable time delay for alarm and warning

TIME

70% (14A) Alarm Signal†

60% (12A) Warning Signal†

Amp Draw

Eect of

Rebalancing

Critical

State

Ckt. 1

Ckt. 2

Panel Board 1

LEFT RIGHT

4139373533312927252321191715131197531

42403836343230282624222018161412108642

Channel 4

Channel 2

Channel 3

Channel 41

H663 Data Acquisition Board

Channel 1

" " " " " " " " " "

Channel 42

" " " " " " " " " "

+1 503.598.4564

www.veris.com

APPLICATION/WIRING EXAMPLES

OPERATION EXAMPLE

DIMENSIONAL DRAWING

Signal Aquisition Board

7.25”

(184 mm)

6 4 2

H663 CT (50A)

1.1"

(27 mm)

0.4" Radius (10 mm)

1.6"

(41 mm)

10 8 18

(152 mm)

0.3"

(6 mm)

5.75”

(146 mm)

1.1"

(27 mm)

ORDERING INFORMATION

MODEL NUMBER OF CTs AMPERAGE RANGE OUTPUT

H663SM-xx(H)(E) x x = 42, 30, 24, 12, or 1 (select able) Up to 50 A* (congurabl e) Modbus RTU

For 240 VAC supply voltage version, order the H663SM-xxE. For the 100 A CT version, order the H663SM-xxH. For the 240 V, 10 0A version, order the H663SM-xxHE. For N2 protocol versions, order H662SM-xx. NOTES: * Hole size accommodates up to 6 AWG (10mm2) THHN insulated conductors. † Other protocols available; consult factory.

HQ0001911.A 01121

H663 CT (100A)

power/energy monitoring

ACCESSORIES

Network Display (H8936)

†