H5xx SERIES
VERIS INDUSTRIES
Field Mount Motor
Control Device
Combination Switching
Relay, Current Status
Switch, and HOA Switch
DESCRIPTION
The Hawkeye 5xx Series combines an industrial grade load-switching relay,
current status switch, and Hand-O-Auto (HOA) switch in an easy-to-install
remote enclosure, making the series ideal for monitoring, directly controlling, and
troubleshooting the control wiring of fractional horsepower motors.
The relay, current sensor, and HOA switch are combined in a series circuit. Once an
H5xx is wired in series between the power source and motor, all three components
are installed. The housing provides physical separation and multiple wiring exits to
isolate control and high voltage wiring. An H5xx can be mounted directly on 2- or
4-gang junction boxes, nippled to a eld enclosure, or stand alone.
APPLICATIONS
● Monitoring status and controlling small motor loads that are not driven by a
current monitoring
motor starter or contactor
• Exhaust fans
• Unit ventilators
• Fan terminal units
• Fan coil units
• Recirculating pumps
TM
H535 H548
FEATURES
● Remote mounted current status sensor and command relay with or without
HOA switch
● Combines status sensor, command relay, and HOA switch in a single series
circuit...one line connection for three devices
● Remote mounted enclosure eliminates the need to cram multiple devices
into a junction box
● HOA provides true relay control...ideal for troubleshooting control wiring
● SPST relay is eld-selectable for N.O. or N.C. operation
● All models rated up to 1HP@120VAC, NS Versions 1HP@120VAC and
1.5HP@277VAC... one product for all fractional HP motor control and
status applications
● Mounts directly on gang boxes, ush to existing enclosures or stand alone...
maximum installation exibility
● 5-year warranty
RELAY
SPDT (NS) Models
Resistive..........15A@277VAC
Motor...............1HP@120VAC
1.5HP@277VAC
SPST (HOA) Models
Resistive..........15A@250VAC
Motor...............1HP@120VAC
CONTACT RATINGS
Maximize Reliability
Minimize Installed Cost
TYPICAL COIL PERFORMANCE
Voltage AC DC
24V ..................................................... 36mA 36mA
Year
5
SPECIFICATIONS
Sensor Power Induced from monitored conductor
Frequenc y Range 50/60 H z
Humidity Range 10-90% RH non-condensing
Temperature Range -15° to 50°C (5° to 122°F)
Terminal Block Wire Size 24-14 AWG (0.2 to 2.1 mm2)
Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m)
Agency Approvals UL 508 open device listing
Warranty
Do not use the LED status indicators as evidence of applied voltage.
800.354.8556
+1 503.598.4564
www.veris.com
HQ0 001771. B 01131
800.354.8556
POWER
SOURCE
IN SERIES
RELAY
HOA
SWITCH
CURRENT SENSOR
= CIRCUIT PATH
EXHAUST FAN
DIGITAL OUT
24V
STATUS IN
CONTROLLER
+1 503.598.4564
www.veris.com
DIMENSIONAL DRAWING
H500
4.25"
(108 mm)
Opening
C
(30 mm)
Wire
Opening
(Low Voltage Only)
Wire
L
1.16"
L
4.25"
(108 mm)
MOUNTING OPTIONS
Mounts directly on 4-gang junction box
1.2"
(30 mm)
(39 mm)
Low Voltage
Wires Only
1/2" Conduit
Fitting
1.6"
Wire
Opening
2.2"
(55 mm)
APPLICATION/WIRING DIAGRAM
C
L
Mounts directly on wall or panel
Low Voltage
Wires Only
Note: See installation guide for
wiring requirements
1/2" Conduit
Fitting
Line Voltage
Wires
Mounts directly on 2-gang junction box
Low Voltage
Wires Only
RS
Line Voltage
Wires
OC
SO
SP
SC
ORDERING INFORMATION
MODEL AMPERAGE
RANGE
H535 0.25 - 15A Relay Only SPST, Field-Sele ctable N.O/N.C.
H535NS 0.25 - 15A Relay Only SPDT
H540 0.25 - 15A N. O., 1.0A@30VAC/DC 0.25A or less, Fixed SPST, Field-Sele ctable N.O/N.C
H540NS 0.25 - 15A N. O., 1.0A@30VAC/DC 0.25A or less, Fixed SPDT
H548 0.5 - 15A N. O., 1.0A@30VAC/DC 0.5A or less, Adjustable SPST, Field-Sele ctable N.O/N.C
H548NS 0.5 - 15A N. O., 1.0A@30VAC/DC 0.5A or less, Adjustable SPDT
STATUS OUTPUT TRIP POINT RELAY RELAY
ACCESSORIES
Ground bonding kit (AH10)
HQ0 001771. B 01131
Nipple to
Existing
Enclosures
Line Voltage Wires
Enclosure Mount
Status Output & Relay Coil
(Low Voltage Wires Only)
ENCLOSURE
HOA
COIL
24VAC/DC
SWITCH
n n n
n n n
n n n n
STATUS
LEDS
n n n
RELAY
POWER LED
n n
n n
current monitoring
UL