Veris E50C3 Installation Instructions

Installation Guide

the FCC Rules. These limits are designed to provide reasonable protection

residential environment. This equipment generates, uses, and can radiate

Power Monitoring

RoHS

Compliant

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.

• This equipment must only be installed and serviced by qualiﬁed electrical personnel.

• Read, understand and follow the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on or inside the equipment.

• Any covers that may be displaced during the installation must be reinstalled before powering the unit.

• Use a properly rated voltage sensing device to conﬁrm power is oﬀ. DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION

Failure to follow these instructions will result in death or serious injury.

A qualied person is one who has skills and knowledge related to the construction and operation of this electrical equipment and the installation, and has received safety training to recognize and avoid the hazards involved. NEC2009 Article 100

No responsibility is assumed by Veris Industries for any consequences arising out of the use of this material.

Control system design must consider the potential failure modes of control paths and, for

certain critical control functions, provide a means to acheive a safe state during and after a path failure. Examples of critical control functions are emergency stop and over-travel stop.

E50B1, E50C2, E50C3

Compact Power and Energy Meter

Product Overview

The E50 DIN Rail Power Meter provides a solution for measuring energy data with a single device. Inputs include Control Power, CT, and 3-phase voltage. The E50 supports multiple output options, including solid state relay contacts, Modbus (with or without data logging), and pulse. The LCD screen on the faceplate allows instant output viewing.

The meter is housed in a plastic enclosure suitable for installation on T35 DIN rail according to EN50022. The E50 can be mounted with any orientation over the entire ambient temperature range, either on a DIN rail or in a panel. The meter is not sensitive to CT orientation to reduce installation errors.

Product Identiﬁcation

Model Description Output Data Logging

Pulse RS-485 Alarm

E50B1 Pulse Output Only

E50C2 Modbus output, full data set

E50C3 Modbus output, data logging

•

(2 pulses)

• • •

• • • •

WARNING

LOSS OF CONTROL

∙ Assure that the system will reach a safe state during and after a control path failure. ∙ Separate or redundant control paths must be provided for critical control func tions. ∙ Test the eect of transmission delays or failures of communication links. ∙ Each implementation of equipment using communication links must be individually

and thoroughly tested for proper operation before placing it in service.

Failure to follow these instructions may cause injury, death or equipment damage.

For additional information about anticipated transmission delays or failures of the link, refer to

NEMA ICS 1.1 (latest edition). Safety Guidelins for the Application, Installation, and Maintenance of Solid-State Control or its equivalent in your specic country, language, and/or location.

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.

• The installer is responsible for conformance to all applicable codes.

• Mount this product inside a suitable ﬁre and electrical enclosure.

FCC PART 15 INFORMATION NOTE: This equipment has been tested by the manufacturer and found to

comply with the limits for a class B digital device, pursuant to part 15 of

against harmful interference when the equipment is operated in a

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modiﬁcations to this product without the express authorization of the

manufacturer nullify this statement.

For use in a P ollution D egree 2 or be tter envi ronment on ly. A Pollutio n Degree 2 environment must control conductive pollution and the possibility of condensation or high hum idity. Cons ider the enc losure, th e correc t use of venti lation, the rmal prop erties of the equ ipment, an d the relati onship wi th the envir onment. In stallati on categor y: CAT II or CAT III. P rovide a di sconnec t device to di sconnec t the meter f rom the sup ply source. P lace this de vice in clos e proximit y to the equ ipment and w ithin eas y reach of the oper ator, and mark i t as the disc onnecti ng device. T he disconn ecting de vice shall meet th e relevant r equireme nts of IEC 60 947-1 and IEC 60947-3 and sh all be suit able for the appl ication. I n the US and Can ada, discon nectin g fuse hold ers can be us ed. Provi de overcu rrent prot ection a nd discone cting dev ice for sup ply conduc tors wit h approved current limiting devices suitable for protecting the wiring. If the equipment is used in a manner n ot specie d by the manu facture r, the protec tion prov ided by the d evice may be impaired.

Speciﬁcations

Real Power and Energy

Reactive Power and Energy

Sample Rate

Data Update Rate

Type of Measurement

Measured AC Voltage

Metering Over-Range

Frequency Range

Measurement Input Range

Current

Voltage

Impedance

CT Scaling

Impedance

MEASUREMENT ACCURACY

IEC 620 53 -22 Class 0.5S, ANS I C12.20 0.5%

IEC 620 53 -23 Class 2, 2%

0.4% (+ 0.015% per °C deviation from 25°C) from 5% to 100% of range; 0.8% (+0.015% per °C deviation from 25° C) from 1% to 5% of range

0.4% (+ 0.015% per °C deviation from 25°C) from 90V

2520 samples per second

1 sec

True RMS up to the 21st harmonic 60 Hz; One to three phase AC system

INPUT VO LTAG E CHARACTE RISTI CS

Minimum 90V

UL Maximums: 600V

CE Maximum: 300V

+20%

2.5 MΩ

45 to 65 Hz

INPUT CUR RENT CHAR ACTERISTICS

Primar y: Adjustable from 5 A to 32,000 A

0 to 0.333 VAC or 0 to 1.0 VAC (+20% over-range) , rated for use with Class 1 voltage inputs

10.6 kΩ (1/3 V mode) or 32.1 kΩ (1 V mode )

L-N

/5 M Ω

(156V

) for stated accuracy;

L-L

(3 47V

L-L

L-N

L-L

)

L-N

Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

to 60 0VAC

L-N

L-L

Installation Guide Power Monitoring EB, EC, EC

Speciﬁcations (cont.)

CONTROL POWER

5VA max. ; 90V min.

UL Maximums: 600V

CE Maximum: 300V

DC*

3 W max.; U L and CE: 125 to 300V DC

Ride Through Time

Alarm Contacts (all models)

Real Energy Pulse Contacts

(all models) AND

Reactive Energy Pulse Contacts

(E50B1A only)

RS- 485 Port (E50CxA)

Weight

IP Degree of Protection

(IEC 6 0529)

Display Characteristics

Terminal Block Screw Torque

Terminal Block Wire Size

Operating Temperature Range

Storage Temperature Range

Humidity Range

Altitude of Operation

US and Canada

Dielectric Withstand

Conducted and Radiated

Emissions

Conducted and Radiated

Immunity

US and Canada (cULus)

Europe (CE)

* External DC current limiting is required, see fuse recommendations.

100 msec at 120VAC

OUTPUT

N.C., static output (30VAC/ DC, 100mA max. @ 25°C, derate 0.56m A per °C above 25°C )

N.O., static output ( 30VAC /DC, 100mA max. @ 25°C, derate 0.5 6mA per °C above 25°C )

2-wire, 120 0 to 38 400 baud, Modbus RTU

MECHAN ICAL CHARACTER ISTICS

0.62 lb ( 0. 28 kg)

IP40 front display; IP20 Meter

Back-lit blue LCD

0.37 to 0.44 ft-lb ( 0.5 to 0.6 N· m)

24 to 14 AWG (0.2 to 2.1 mm2)

Rail

T35 ( 35mm) DIN Rail per EN500 22

OPERATING CO NDITION S

-30° to 70°C (-22° to 158 °F)

-4 0° to 85°C ( -4 0° to 185°F)

<95% RH noncondensing

3000 m

COMPLIANCE INFORMATION

CAT III, Pollution degree 2;

for distribution systems up to 347 V

CAT III, Pollution degree 2;

for distribution systems up to 300V

Per UL 50 8, EN61010

FCC par t 15 Class B, EN 55011/EN61000 Class B (residential and light industrial)

EN61000 Class A (heav y industrial)

UL508 (open type device )/ CSA 22.2 No. 14- 05

EN6 1010 -1

L-L

L-N

(3 47 V

)

L-N

/60 0VAC

L-N

L-L

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Power Monitoring EB, EC, EC

Table of Contents

Dimensions 4

Data Outputs 4

Product Diagram 5

Display Screen Diagram 5

Installation 6

Supported System Types 7

Wiring Symbols 7

Wiring 8

Control Power 9

Quick Setup Instructions 10

Solid State Output 11

User Interface Menu Abbreviations Dened 11

User Interface for Data Conguration 12

Alert/Reset Information 13

User Interface for Setup 14

RS-485 Communications (E50C3 Only) 16

Data Logging (E50C3 Only) 16

Modbus Point Map Overview 17

Standard Modbus Default Settings 17

Modbus Point Map Overview 18

Modbus Point Map 19

Troubleshooting 26

China RoHS Compliance Information (EFUP Table) 26

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Power Monitoring EB, EC, EC

Dimensions

1.8”

(45mm)

1.9”

(48mm)

2.3”

(59mm)

1.5”

(39mm)

4.2”

(107mm)

3.6”

(91mm)

Bottom View (DIN Mount Option) Bottom View (Screw Mount Option)

2.4 “

(61 mm)

0.2 “

(4 mm)

3.6 “

(91 mm)

4.2 “

(107 mm)

3.9“

(99 mm)

4.3 “

(109 mm)

1.2 “

(31 mm)

0.3 “

(8 mm)

0.4 “

(10 mm)

Data Outputs

Full Data Set (FDS):

Power (kW) Energy (kWh) Congurable for CT & PT ratios, system type, and passwords Diagnostic alerts Current: 3-phase average Volts: 3-phase average Current: by phase Volts: by phase Line-Line and Line-Neutral Power: Real, Reactive, and Apparent 3-phase total and per phase Power Factor: 3-phase average and per phase Frequency Power Demand: Most Recent and Peak Demand Conguration: Fixed, Rolling Block, and External Sync (Modbus only)

Data Logging (includes all FDS outputs, plus):

Real Time Clock: user congurable 10 user congurable log buers: each buer holds 5760 16-bit entries

(User congures which 10 data points are stored in these buers)

User congurable logging interval

(When congured for a 15 minute interval, each buer holds 60 days of data) Continuous and SIngle Shot logging modes: user selectable Auto write pause: read logs without disabling the meter’s data logging mode

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide





Power Monitoring EB, EC, EC

Product Diagram

X2 X1 X2 X1 X2 X1

(X2) A (X1) (X2) B (X1) (X2) C (X1)

Phase Loss

Alarm

Alarm Energy

Pulse

Output varies

OUTPUT

by model *

CT Inputs

1 or 0.333 VAC

Two 5-character rows

of display text.

Top row alphanumeric;

Bottom row numeric only

Alarm Energy

The red Alarm LED lights when any of the 3 phase voltages drop below the selected

VOLTAGE INPUTS CAT III 50/60 Hz

threshold. The green Energy LED lights momentarily each time the Energy output pulse is

A B C N 1 2

active.

* Two Output Options Available

Pulse (E50B1) RS-485 (E50Cx)

N.O. Contact

+ - S

Modbus

+ - S

NC NO + - S

–

UL: 90V

- 600V

CE: 90V

L-N

Neutral

Shield

- 300V

L-L

L-N

CONTROL POWER

0.1A 50/60 Hz

Earth

Control

Power

Display Screen Diagram

VAR h

LCD Screen: Buttons:

Screen Name or Units

Diagnostic Alert



Logo



Numeric Data

♥

Tx Rx ERR

RS-485

Alive Indicator

RS-485 Equipped Units Only: Transmit Data Receive Data Receive Data Error

(Left)

Back

(Up)

Select

(Right)

–

(Down)

Select

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Power Monitoring EB, EC, EC

Installation

Disconnect power prior to installation.

Reinstall any covers that are displaced during the installation before powering the unit.

Mount the meter in an appropriate electrical enclosure near equipment to be monitored.

Do not install on the load side of a Variable Frequency Drive (VFD), aka Variable Speed Drive (VSD) or Adjustable Frequency Drive (AFD).

The meter can be mounted in two ways: on standard 35 mm DIN rail or screw-mounted to the interior sur face of the enclosure.

A. DIN Rail Mounting

1. Attach the mounting clips to the underside of the housing by sliding them into the slots from the inside. The stopping pegs

must face the housing, and the outside edge of the clip must be ush with the outside edge of the housing.

2. Snap the clips onto the DIN rail. See the diagram of the underside of the housing (below).

Clip ﬂush with outside edge

Snap onto

Insert clips from inside

DIN rail

3. To reduce horizontal shifting across the DIN rail, use two Veris AV02 end stop clips.

B. Screw Mounting

1. Attach the mounting clips to the underside of the housing by sliding them into the slots from the outside. The stopping pegs

must face the housing, and the screw hole must be exposed on the outside of the housing.

2. Use three #8 screws (not supplied) to mount the meter to the inside of the enclosure. See the diagram of the underside of the

housing (below).

Insert clips from outside

Screw holes exposed for mounting

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Power Monitoring EB, EC, EC

Supported System Types

Number

of wires

Single-Phase Wiring

2 1 A 2 A, N L-N 10 1L + 1n AN 1

2 1 A 2 A, B L- L 11 2L AB 2

3 2 A, B 3 A, B, N L-L with N 12 2L + 1n AB AN, BN AN-BN 3

Three-Phase Wiring

3 3 A, B, C 3 A, B, C Delta 31 3L AB, BC, CA AB-BC-CA 4

4 3 A, B, C 4 A, B, C, N Grounded

The meter has a number of dierent possible system wiring congurations (see Wiring section). To congure the meter, set the System Type via the User Interface or Modbus register 130 (if so equipped). The System Type tells the meter which of its current and voltage inputs are valid, which are to be ignored, and if neutral is connected. Setting the correct System Type prevents unwanted energy accumulation on unused inputs, selec ts the formula to calculate the Theoretical Maximum System Power, and determines which phase loss algorithm is to be used. The phase loss algorithm is congured as a percent of the Line-to-Line System Voltage (except when in System Type 10) and also calculates the expected Line to Neutral voltages for system types that have Neutral (12 & 40).

Values that are not valid in a particular System Type display as “----” on the User Interface or as QNAN in the Modbus registers.

CTs Voltage Connections System Type Phase Loss Measurements Wiring

Qty ID Qty ID Type Modbus

40 3L + 1n AB, BC, CA AN, BN, CN AN-BN-CN &

Wye

User Interface:

SETUP>S SYS

VLL VLN Balance Diagram

5, 6

AB-BC-CA

Diagram

number

Wiring Symbols

To avoid distortion, use parallel wires for control power and voltage inputs.

The following symbols are used in the wiring diagrams on the following pages.

Symbol Description

Voltage Disconnect Switch

Fuse (installer is responsible for ensuring compliance with local requirements. No

fuses are included with the meter.)

Earth ground

Current Transducer

Potential Transformer

Protection containing a voltage disconnect switch with a fuse or disconnect circuit

breaker. The protection device must be rated for the available short-circuit current at the connection point.

CAUTION

RISK OF EQUIPMENT DAMAGE

• This product is designed only for use with 1V or 0.33V current transducers (CTs).

• DO NOT USE CURRENT OUTPUT (e.g. 5A) CTs ON THIS PRODUCT.

• Failure to follow these instructions can result in overheating and permanent equipment damage.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Power Monitoring EB, EC, EC

Wiring

WARNING

RISK OF ELECTRIC SHOCK OR PERMANENT EQUIPMENT DAMAGE

CT negative terminals are referenced to the meter’s neutral and may be at elevated voltages

· Do not contact meter terminals while the unit is connected

· Do not connect or short other circuits to the CT terminals

Failure to follow these instructions may cause injury, death or equipment damage.

Diagram 1: 1-Phase Line-to-Neutral 2- Wire

System 1 CT

N L1

Use System Type 10 (1L + 1n)

A B C N

White

Black

X2 X1

Diagram 3: 1-Phase Direct Voltage Connection 2 CT

L1 L2

Use System Type 12 (2L + 1n) Use System Type 31 (3L)

Diagram 2: 1-Phase Line-to-Line 2-Wire

L1 L2

Diagram 4: 3-Phase 3-Wire 3 CT no PT

L1 L2 L3

System 1 CT

Use System Type 11 (2L)

White

Black

A B C N

X2 X1

A B C N

White

Black

White

Black

X2 X1

Diagram 5: 3-Phase 4-Wire Wye Direct Voltage Input

Connection 3 CT

Use System Type 40 (3L + 1n)

L1N L2 L3

A B C N

White

Black

White

Black

White Black

X2 X1

A B C N

White

Black

White

Black

White

Black

X2 X1

Diagram 6: 3-Phase 4-Wire Wye Connection 3 CT

3 PT

Use System Type 40 (3L + 1n)

L1N L2 L3

A B C N

White Black

White

Black

White

Black

X1 X2 X1 X2 X1 X2

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

+ 18 hidden pages