VERBATIM VERBATIM 55032 Datasheet
55000
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK
55001
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE
55002
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE
55003
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG RED
55004
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN
55006
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG SILVER/METAL GREY
55010
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK (n)
55011
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE (n)
55012
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE (n)
55013
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG RED (n)
55014
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN (n)
55016
-
812
VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG SILVER/METAL GREY (n)
55017
-
812
VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG WHITE (n)
55018
-
812
VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG BLACK (n)
Material Safety Data Sheet
Issued on April 24 2015
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: ABS Filament for 3D Printer
Brand: Verbatim
Company name: Mitsubishi Kagaku Media Co., LTD.
Address: Daini Ryumeikan Bldg. 8F 3-20, Kandaogawmachi,
Chiyoda-ku, Tokyo 101-0052, Japan
Department: Archive Business Development Department
Telephone: +81-3-5577-3095
Fax: +81-3-3295-0680
Reference number: 3DF-150421-01E
Recommended use and restriction on use: 3D Printer Filament for Material Extrusion
type
2. HAZARDS IDENTIFICATION GHS Classification:
Physical hazards: Classification not applicable
Health hazards: Classification not applicable
Environmental hazards Classification not applicable
Page 1 of 5
No.
Content
CAS number
Chemical
Content (%)
1
Acrylonitrile-
butadiene-styrene
Copolymer.
9003-56-9
(C3H3N, C4H6,
C8H8) n
More than
96%
2
Additive & Pigment
Not disclosed
Not disclosed
Less than 4%
No.
ENCS;
Japanese Existing and New Chemical
Substances
ISHL;
Industrial Safety and Health
Law Number
1
(6)-176
-
GHS Label elements:
Pictogram or symbol: Not applicable.
Signal word: Not applicable.
Hazard statement: No relevant information.
Precautionary statement:
Safety measures: Do not breathe dust/fume/gas/mist.
Response: Get medical attention/advice if you feel
unwell.
Storage: Keep away from fire.
Store indoors at ambient temperature.
Disposal: Do not dump into sewers, on the ground or
into any body of water.
Burn in an adequate incinerator or bury in
landfill in accordance with applicable local,
state, and federal regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical substance/mixture: A mixture
Chemical name or generic name: Acrylonitrile-butadiene-styrene Copolymer
Chemical properties (chemical formula, etc):
No relevant information.
Contents:
Health hazards elements: White filament contains titanium oxide (CAS# 13463-67-
7) less than 1%, which may be carcinogenic. (IARC: Group2B)
Poisonous and Deleterious substances Control Law: Not applicable
4. FIRST AID MEASURES
If inhaled: If you feel unwell by inhalation of vapor or gas,
move to fresh air and keep at rest in a position
comfortable for breathing. Call a doctor if you feel
unwell.
If on skin: In case of contact with melted material, fully cool
down by pouring plenty of water over the clothing.
Then take off clothing, cover with clean gauze and
get medical attention immediately.
Get medical attention if appearance changes,
irritating pain occurs or feeling unwell.
Page 2 of 5
Loading...