Verbatim PET Filament Product Specifications

PET Filament

• High performance Polyethylene Terephthalate (PET)
filament.

• To be used with widely available fused filament
fabrication (FFF) 3D printers.

• Offers good layer adhesion, high resolution and is easy
to handle.

• High level of optical transparency (90%) and strength.

• Commonly used to produce food and beverage
containers and bottles.

*Note: This is preliminary data and not to be considered final specifications. Specification values are for reference only and not intended as a warranty
of any kind.

Product Specifications

Diameter accuracy ± 0.05mm

Extrusion temperature 210 °C - 230 °C

Bed temperature 50 °C - 60 °C

Material net weight 500 g

Filament length

Density 1.34 g/cm

Glass transition temperature 70 °C

Melt temperature 214 °C

Transparency 90%

Tensile strength 70 MPa

Tensile elasticity 2.3 GPa

Tensile elongation 9%

2.85 mm - 59 m

1.75 mm - 155 m

3

PET Filament

Colour Part Number PANTONE® ref.* Diameter Weight

Transparent 55751 Clear 1.75 mm 500 g

Transparent 55752 Clear 2.85 mm 500g

* Closest PANTONE® colour reference

Verbatim filament is manufactured from high quality materials to extremely rigid
standards. The filaments are manufactured from the highest quality materials and
produced to extremely tight tolerances to ensure consistent feed and stable printing.
The filaments are distributed in vacuum-sealed bags with desiccant, and wound onto a
custom spool that has been designed for strength, uniform dynamic performance and
trouble-free dispensing.